Mid-Atlantic Shop Review

shadoquad · 06-01-2011, 03:09 PM

Quote:

Originally Posted by Kirkster

So True...

Even if the person is telling the truth, that post and maybe the whole tread will go down the memory hole...

Its a shame, but that is the game...

So, basically no one say anything bad about AAM and you'll be ok

Kirkster · 06-01-2011, 03:11 PM

Quote:

Originally Posted by shadoquad

So, basically no one say anything bad about AAM and you'll be ok

That about sizes it up...

But Jon has had good luck there with his NA work so maybe they have turned over a new leaf for now...

And I might become a client of theirs if I can't get another shop to weld in a bung for my A/F sensor and some dynojet pulls...

birdmanx1 · 06-01-2011, 03:19 PM

Quote:

Originally Posted by shadoquad

So, basically no one say anything bad about AAM and you'll be ok

Good review about the dent dr place. I'll check them out for a couple of small door dents on my altima from idiots slamming their door on mine in parking lots. Good to know the Kirk!

ZCarMan · 06-01-2011, 04:24 PM

AAM: Great work on all my bolt ons.

D&V: All good with my exterior tinting of the rears, handles, and all other emblems. Also good with the powder coating. Headed back for swap out of my old Potenzas for my new ones.

BP in Laurel: After the camber kit install at AAM, I had my alignment done by Billy and it was quick and painless.

birdmanx1 · 06-01-2011, 08:55 PM

Great stuff Jon, Billy was great to deal with and did a fantastic job for me a few days ago. I'll probably go back though and have the camber set more negative

superchargedg · 06-03-2011, 07:49 PM

Quote:

Originally Posted by Kirkster

That about sizes it up...

But Jon has had good luck there with his NA work so maybe they have turned over a new leaf for now...

And I might become a client of theirs if I can't get another shop to weld in a bung for my A/F sensor and some dynojet pulls...

Kirk JE performance will weld in the bungs but their dyno reads low.

PapoZalsa · 06-03-2011, 10:07 PM

Quote:

Originally Posted by Kirkster

Paintless Dent Repair

Code:

Shop Type: Paintless Dent Repair
Shop Name:Paintless Dent Doctor 
Address:Your house...  They come to you
Website:Paintless Dent Doctor - Home - Baltimore, MD
Work you had done (w/ price):They have taken dents out of my Z twice now. 125 for the first trip and 95 for the second trip
Stars (1-5, 5 best): *****
Comments: They have come and seen to my Z twice now and you can't find the dents and that first dent was nasty and took the guy an hour to massage out of the car

In this area Yorktown, VA, Chris Farley : 757-592-0875
Did a great job on my SUV!

Somberlaine · 06-04-2011, 01:19 AM

Can someone post a list of a good caraway. I have been taking my Mazda to embassy car wash buy I am worried about taking the z since it's too low.

xohmx · 06-04-2011, 10:44 AM

I am also interested in finding out some good auto detailer in our area. Currently I am working with D&D Auto Detailing and have a date scheduled with them for next month. I will let you know how they do. Looking over the website and over at a autopia they seem to know what they are doing.

In the mean time I need to find someone that can give my Z a good wash with out messing it up.

Yesterday leaving work these guys in a van was washing a car in the parking lot at work. I was watching them as I finished my smoke and he was polishing the car with a buffer and the pad flew off onto the ground....he picks it up and put it back on the buffer and kept going....Well guess I won't be using them...

birdmanx1 · 06-04-2011, 09:59 PM

Quote:

Originally Posted by xohmx

I am also interested in finding out some good auto detailer in our area. Currently I am working with D&D Auto Detailing and have a date scheduled with them for next month. I will let you know how they do. Looking over the website and over at a autopia they seem to know what they are doing.

In the mean time I need to find someone that can give my Z a good wash with out messing it up.

Yesterday leaving work these guys in a van was washing a car in the parking lot at work. I was watching them as I finished my smoke and he was polishing the car with a buffer and the pad flew off onto the ground....he picks it up and put it back on the buffer and kept going....Well guess I won't be using them...

I wouldn't trust my car to those guys working from vans.

D&L Tinting also does full detailing work for about $150 xhomx, check'em out sir

rarwz · 06-06-2011, 08:47 AM

Wanted to report in, went to IAG (westminster) to get my TPMS switched, mount, balance, alignment done. $225, 4.5hrs, they did a great job. Kept me informed of all the steps along the way, held my new and old rims a few days extra (can't fit them in the Z). They even asked my weight for the alignment to make sure it was tuned for me being a fattie.

Extremely happy with the work, just sucks you need to get the appt 3 weeks in advance.

birdmanx1 · 06-06-2011, 08:58 AM

Quote:

Originally Posted by rarwz

They even asked my weight for the alignment to make sure it was tuned for me being a hottie.

Extremely happy with the work, just sucks you need to get the appt 3 weeks in advance.

Your setup looks sick man, I might have to look in getting those rims sooner rather than later now. Oh fixed BTW

b1adesofcha0s · 06-06-2011, 12:53 PM

Post up some pics of the new wheels Mike

birdmanx1 · 06-06-2011, 01:24 PM

Quote:

Originally Posted by b1adesofcha0s

Post up some pics of the new wheels Mike

He's been playing hard to get and rolling in my neighborhood really slick without stopping and knowing that I was trying to check out his sweet rims. I rolled at his place when he was away and took the d*mn pic. Here it is. Disclaimer guys, if anything happens to my car, he did it. You are my witnesses.

b1adesofcha0s · 06-06-2011, 01:25 PM

Those look awesome

06-01-2011, 04:24 PM	#19 (permalink)
ZCarMan A True Z Fanatic Join Date: Jun 2009 Location: MD Posts: 4,488 Drives: 09 Z34, 13 F-150 Rep Power: 26	AAM: Great work on all my bolt ons. D&V: All good with my exterior tinting of the rears, handles, and all other emblems. Also good with the powder coating. Headed back for swap out of my old Potenzas for my new ones. BP in Laurel: After the camber kit install at AAM, I had my alignment done by Billy and it was quick and painless. __________________ Jon Swift \| SPC \| Stillen \| Motordyne \| AAM \| Cobb \| Hawk \| Volk Racing \| Bridgestone Green Demon Eyes

06-01-2011, 08:55 PM	#20 (permalink)
birdmanx1 A True Z Fanatic Join Date: Jun 2010 Location: Baltimore, MD Age: 95 Posts: 3,175 Drives: 370z Nismo Rep Power: 24	Great stuff Jon, Billy was great to deal with and did a fantastic job for me a few days ago. I'll probably go back though and have the camber set more negative __________________ 370Z NISMO #0462 \| ClearBra \| 3M tint \| Head/Taillights \| Dynamat \| Black Roof \| Tommy Kaira HB \| CF Parts \| Berk HFCs \| FI SS \| NST Pulleys \| Takeda aFe \| K&N \| H&R Spacers \| Swift Spec R \| SPC F&R \| Zuperman M370 Nismo Vid \| Nismo Journal \| Nismo Rumble

06-04-2011, 01:19 AM	#23 (permalink)
Somberlaine Base Member Join Date: Apr 2011 Location: Fairfax, VA Posts: 242 Drives: 2016 Golf R Rep Power: 14	Car wash Can someone post a list of a good caraway. I have been taking my Mazda to embassy car wash buy I am worried about taking the z since it's too low.

06-04-2011, 10:44 AM	#24 (permalink)
xohmx Base Member Join Date: May 2011 Location: Mid Atlantic Posts: 121 Drives: 2010 370Z Nismo PG Rep Power: 14	I am also interested in finding out some good auto detailer in our area. Currently I am working with D&D Auto Detailing and have a date scheduled with them for next month. I will let you know how they do. Looking over the website and over at a autopia they seem to know what they are doing. In the mean time I need to find someone that can give my Z a good wash with out messing it up. Yesterday leaving work these guys in a van was washing a car in the parking lot at work. I was watching them as I finished my smoke and he was polishing the car with a buffer and the pad flew off onto the ground....he picks it up and put it back on the buffer and kept going....Well guess I won't be using them... Last edited by xohmx; 06-04-2011 at 10:52 AM.

06-06-2011, 12:53 PM	#28 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 141	Post up some pics of the new wheels Mike __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

06-06-2011, 08:47 AM	#26 (permalink)
rarwz Base Member Join Date: Mar 2010 Location: 370z Posts: 178 Drives: 09 Touring Rep Power: 15	Wanted to report in, went to IAG (westminster) to get my TPMS switched, mount, balance, alignment done. $225, 4.5hrs, they did a great job. Kept me informed of all the steps along the way, held my new and old rims a few days extra (can't fit them in the Z). They even asked my weight for the alignment to make sure it was tuned for me being a fattie. Extremely happy with the work, just sucks you need to get the appt 3 weeks in advance.

06-06-2011, 01:25 PM	#30 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 141	Those look awesome __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mid-Atlantic Spotted Thread	CrownR426	Mid-Atlantic Region	12	10-17-2015 02:41 PM
Mid-Atlantic Cruise: York Road	shadoquad	Mid-Atlantic Region	430	06-18-2011 08:27 AM
20 March Mid-Atlantic Meet	ZCarMan	Mid-Atlantic Region	7	03-22-2010 10:58 AM
Mid Atlantic Driving Loops	Sscottfitz	Mid-Atlantic Region	13	03-02-2010 08:06 AM