YzGyz

The kit install itself is not bad at all. I would estimate it would take good weekend (25 hrs) If you have all your tools lined up. I approve of the kit's design. The instructions for the most part is clear. There were some areas that I couldn't follow but you could post and ask for help. Quite a few people have taken on the task so there are people who can help. SASHA is pretty good with respond to e mails And pm's. I would rate the turbo install itself a 6/10.

List of things to have ready:
-clutch and flywheel to handle power goal
-tools, sockets, lots of extensions, wobble bits, large adjustable Cresent wrench
-safe flat surface and Jack stands
-some lube ( I used water based like KY) to lube up the couplers so they slide together easier
-good light to see around in
-make sure you can get the cat off
-soldering iron and shrink wrap

Hey YzGyz! I was just looking at your build thread and I was wondering how the installation of your BP turbo was and any initial thoughts or comments on the setup in general?

Just a short video for you guys! 0TMkDFNoUdk I drove the car around 50 miles on the base tune and so far so good. I will be checking the car over on a lift tomorrow (friends shop) just to...

Quick Jack to the rescue for my 1977 Fiat Spider. I'm doing a bunch of maintenance on it including rebuilding the carbs (dual Webers), a valve adjustment, new brake fluid, new coolant and a general...

The tuner finally came back from vacation and my base tune is tomorrow afternoon. I pretty much finished everything I hope and just waiting for smaller inlet filters as the ones I bought are too...

I think I got super lucky on this one but time will only tell. Just ran the car through 4 oil changes (cheap oil) just Incase there's any objects but looks good so far. Oil pressure is approx...

Really enjoyed my 2010 and 2013 370Z Roadsters, but after seven years it was time to move on. I've bounced back and forth between Zs and Vettes over the years, and after saving for a while, it was...

I am also a fan of soft dome tweeters.

+1 on not running rear speakers. True, SQ or SPL should have been more of a direct question. Nice head unit combo. I just lost use of my Alpine 7909 a few months ago. OP if your happy with crunch,...

I have to agree with ditching the rear speakers, but its more a personal preference. Since you seem to be going all out, you will want to get a set of components for the front. you need the...

I figured I would start another thread on my build and plans. In the past few months I have made some major changes to the car after my motor popped back in December. I immediately purchased a new...

Good news! Finally found the problem. Somehow after removing the Mocal sandwich plate and getting the pre '12 stud, it works perfectly. Approx 100psi of oil pressure at idle. The turbo return...

Great job putting this together. :tup: So few interesting builds going on right now. I think you're making believers out of your skeptics!:tiphat:

Thought we was going to have great results with the CSF radiator. Now the long term results are starting to come in. And it doesn't look good.

Haha it's not easy at all! It's been stressing me out so much but it's good that it's almost finished. Showing you guys something I bought from a gtr owner. I was looking for BOV's and...

Got my first package from Sasha and started with the DEI heat wrap... http://www.the370z.com/members/zashburn-albums-mods-picture97212-bp-piping.jpg In the mean time i've been trying to keep...

Another small update!! The intercooler piping turned out to be way easier than I originally thought. By using a cheapo eBay universal kit, I didn't even have to cut or modify anything for the driver...