Tractionless

Sold some shocks to Tractionless. Nice, easy guy to deal with. Thanks!

I highly recommend NOT using Getyourwheels.com

I had a problem with my Forgestar F14's clear coat failing within 4 months and 1,500 miles of ownership in a state that doesn't see freeze/thaw nor use road salt.

Get your wheels receives them as blanks from Forgestar and then finishes to your liking. Who ever they are using for coating is subpar!

They tried blaming my installer but when I told them i went to a high end shop that deals with all kinds of wheels in sizes up to 30" and showed pics of the machines they backed off. Then they admitted the coater was having problems with the clear that was used on my wheels.

They told me I had to cover dismount, shipping both ways and re-mounting costs to have them recoated.

Upon receiving them back the water that got below the clear damaged the metal permanently. So although recoated the damage can always be seen underneath. They did not tell me that prior to shipping back.

When approaching them about it they offered me a $50 refund on a $2100 set of wheels.

RUN from Getyourwheels.com!!!!

Thanks for an easy transaction. Super transparent and communicative buyer! Buy/sell with confidence.

excellent seller everything worked out great thanks

10/10 would recommend Tractionless as a seller. I recently bought some used wheels from him and he shipped them out the next day. They arrived exactly as described and they were packaged very well! Thanks again

"Tractionless is one of the nicest person I have ever dealt with. I would definitely
do another transaction with him in the future."

I second that, a pleasure to do business with!!

Tractionless is one of the nicest person I have ever dealt with. I would definitely
do another transaction with him in the future.

:iagree: The increase in downforce becomes noticeable to me around 70-80 mph and the car actually becomes more stable. That stability is pretty solid until you start to reach 120+ mph in my...

LOL, folks will lie about anything. Too funny.

:iagree: Plastic door handles don't polish up like you're describing. The "polish" was likely a cleaner or finish wax on the painted handle.

you can buy cheap large bags of them on eBay / Amazon. Great to have on hand and I don't reuse them most of the time now - just put on new ones. ...

Someone is going down a rabbit hole . :)

Don't drain the oil cooler. Just do your normal service. The only time you would drain the oil cooler is when doing a rebuild and then it is best just to replace it if you had a major issue with...

It's best to have a drive on lift. Makes it' easier to get to the links. If not, a set of ramps will do. Drive up the ramps. The tires CAN NOT be hanging. The cars weight HAS to be on them. To...

Honestly, just use rainX it will be more cost effective and sheds standing water pretty well. I live in GA and it rains all the time! I also tinted my windows 20% and tinted my tails 5% sooo needless...

What in the hell is instagram? :confused:

It’s going to be more than that for me. I found a low mileage (37k) trans for $800 delivered, driveshaft $550, oil, then figure out what I want to do for drilling housing, and that’s if I do it...

No one should be dropping $6k on brakes unless they’re hard tracking the car above stock power levels or doing regular car shows For track people don’t they want to know stuff like boot/no boot,...

IPT Built Trans will have Motul ATF 6 in it :tup:

I used the Valvoline multi ATF from Walmart @ around $17 per gallon….meets all spec

Ebc has some. That's what I was planning to get, just wasn't sure it really makes a difference. I was more concerned about the weight of the rotors more than braking performance. After some reading...

EPS kit has the best bolts.