SteveSAS

Base Member

Last Activity: 08-22-2023 03:19 AM

About Me

About SteveSAS

Location

Australia

Drives

370z

Statistics

Total Posts

General Information

Last Activity: 08-22-2023 03:19 AM
Join Date: 06-09-2018
Referrals: 0

Likes Received

36 Likes

2011 Nismo#91 liked post by SteveSAS On thread : P1606

Your correct but you can misdiagnose with a VOM as well. Best to load power supply and check voltage at same time at the VVEL connector. You may be referring to the low wattage test lamps. Not...
Liked On: 10-02-2022, 09:37 PM
Posted On: 01-20-2020, 04:10 AM
JARblue liked post by SteveSAS On thread : P1606

VVEL reference starts at FSM EC-597 2010 revision. Show what you should see on each pin. But see EC-606 shows module pinout.
Liked On: 12-17-2021, 12:09 PM
Posted On: 01-22-2020, 04:54 AM
503.Zed liked post by SteveSAS On thread : Dreaded P0300

better than having P0COVID
Liked On: 05-11-2020, 06:35 PM
Posted On: 04-27-2020, 04:28 AM
sportsman2003 liked post by SteveSAS On thread : Dreaded P0300

better than having P0COVID
Liked On: 05-10-2020, 10:53 PM
Posted On: 04-27-2020, 04:28 AM
Jayhovah liked post by SteveSAS On thread : Dreaded P0300

better than having P0COVID
Liked On: 04-29-2020, 09:23 AM
Posted On: 04-27-2020, 04:28 AM
bunk liked post by SteveSAS On thread : Dreaded P0300

better than having P0COVID
Liked On: 04-27-2020, 08:48 AM
Posted On: 04-27-2020, 04:28 AM
Chrisc3 liked post by SteveSAS On thread : Dreaded P0300

better than having P0COVID
Liked On: 04-27-2020, 04:44 AM
Posted On: 04-27-2020, 04:28 AM
ZoomZ liked post by SteveSAS On thread : Battery suggestion for 2020?

Was under impression that battery upgrade was to reduce weight? Usually by half. Otherwise whats the point, just by same Panasonic one once it fails.
Liked On: 04-13-2020, 10:43 AM
Posted On: 04-13-2020, 07:01 AM
ZoomZ liked post by SteveSAS On thread : Alternator voltage output/Battery charge voltage

You connect this to one of the wires in the IPDM module. ...
Liked On: 04-11-2020, 11:30 AM
Posted On: 04-11-2020, 01:37 AM
Optimiser liked post by SteveSAS On thread : Alternator voltage output/Battery charge voltage

You connect this to one of the wires in the IPDM module. ...
Liked On: 04-11-2020, 02:42 AM
Posted On: 04-11-2020, 01:37 AM
Optimiser liked post by SteveSAS On thread : Battery suggestion for 2020?

Don't waste your money on these. https://www.youtube.com/watch?v=hKo5iJ2rH7o
Liked On: 04-07-2020, 11:08 PM
Posted On: 04-07-2020, 08:37 PM
scroupious liked post by SteveSAS On thread : No Spark!! aahhh

You maybe out of timing a bit. Did you turn engine over a few times manually before push button start? Make sure your not way off. See http://www.the370z.com/engine-drivetrain/132587-p0340.html ...
Liked On: 04-05-2020, 05:07 PM
Posted On: 04-05-2020, 07:08 AM
bunk liked post by SteveSAS On thread : P1606

I've seem relays cause issues when they are loose in the car and bouncing around. The shock on the relay will cause the contacts to open for a few milliseconds but is enough to trip a error code....
Liked On: 02-12-2020, 08:28 AM
Posted On: 02-12-2020, 02:23 AM
bunk liked post by SteveSAS On thread : P1606

Also look at the possibility that this issue is related to the ecutek tune. I read on another post that someone had to revert back to stock ecu before this error code disappeared.
Liked On: 02-02-2020, 06:34 AM
Posted On: 02-02-2020, 01:38 AM
bunk liked post by SteveSAS On thread : P1606

VVEL reference starts at FSM EC-597 2010 revision. Show what you should see on each pin. But see EC-606 shows module pinout.
Liked On: 01-23-2020, 02:00 PM
Posted On: 01-22-2020, 04:54 AM

Page 1 of 3

SteveSAS

Base Member

About Me

Statistics

Likes Received

Mini Statistics

Recent Visitors