SG4247

Hey man, do you have any contact info for Synolimit? I'm wanting to get some TB's ported and I can not find a way to contact him since his inbox is full on here and myg37.

I have a pair of TBs off my car ready to port. They are in the box ready to ship. Can I get those same TBs ported and returned back to me? I dont want cores from somewhere else.

Please provide a ship to address and payment info.

We just moved and my cards are updating, my subscription is in limbo, whats up?

I just swapped in some like new used injectors from a GTR, retuned it and picked up 20 hp. I dont have an alcohol sensor, i just swap maps based on what ever fuel I want to run.

The base of the Optima battery has a plastic rectangle shape, and it fit inside the locating blocks of the spacer perfectly. The spacer also fit the existing 370Z battery tray very well...

Now, I just have to heave that heavy azz yellow top into the car... I checked all the fitment around the base of the battery and it fits like a glove. Next, I installed the upper and lower hold...

Next, I install the black plastic surround and make sure there is no interference between the battery top and the black plastic surround. Battery is now properly positioned in the car, and the 3D...

Lol... Well...I use it for stuck rotor removal. Remove the bolt, remove the spacer and then install bolt and use the bolt to advance stuck rotor off the rusty hub. Prevents the hammer action on...

Lol... Well...I use it for stuck rotor removal. Remove the bolt, remove the spacer and then install bolt and use the bolt to advance stuck rotor off the rusty hub. Prevents the hammer action on...

After drag racing for over 25 years, I've heard and personally felt this story many times before.... Go get all your stuff, figure out what you actually have in terms of work completed/components...

This: https://www.z1motorsports.com/air-intakes/z1-motorsports/z1-motorsports-370z-g37-cold-air-intake-kit-p-8892.html

Went to the track after work yesterday thinking I could get into the 12.7s. Had the skinny MT fronts and the 285 drag radials on with 1/2 tank of E85. Weather predicted to be in the 50s with low...

Drop the wife off and run 12 s! Oopps dont tell her I said that....

Went to the track after work yesterday thinking I could get into the 12.7s. Had the skinny MT fronts and the 285 drag radials on with 1/2 tank of E85. Weather predicted to be in the 50s with low...

Went to the track after work yesterday thinking I could get into the 12.7s. Had the skinny MT fronts and the 285 drag radials on with 1/2 tank of E85. Weather predicted to be in the 50s with low...

Drop the wife off and run 12 s! Oopps dont tell her I said that....

This set up will not fit, but if you go to the store at the link above and order what material and color you want, Dave and I can print upper hold down and lower spacer for the Optima red top. �� ...

Based on the reviews here, I decided to buy a PC 680 battery. Once I had it installed, it was clear that it doesnt fit the existing battery compartment well. I was worried about the smaller...