pbs370z

Hey man I noticed you have a lightened flywheel on your Z, how is it compared to your original flywheel. Noise chatter acceleration your over all impression if you don't mind. I wanna upgrade my clutch flywheel and diff and I wanna go to a lighter flywheel but I'm getting conflicting answers can you help me out?

caster is not adjustable that camber spec is on the low end, but if you aren't feeling any unusual steering activity, it's nothing to worry about having said that throw away your stock ****,...

I just got these pictures of that dirty filter taken as promised. Anybody have one this dirty? I think this filter has around 3 1/2 years of dirt built up... What was I thinking... NOT!!!!:bowrofl:

I sprayed Lysol in the intake vents in front of the windshield, with the AC set to outside air, and it took care of it.

If you go this route with the Z1 cover and are also installing upgraded diff bushings, I suggest opting for the Whiteline bushings over the Energy Suspension bushings. The ES bushings have a little...

Here is my little guide for track setup. let me say this guide will help you with a 350z or 370z but there are some differences you need to be aware of between the cars. The 370Z was built to...

Sucking the old stuff is by far the easiest approach but you don't get a 100% swap. It is pretty easy to pull the hose off the PS cooler (just a sping clamp) and get most of it but you'll need to...

Waste of time. The Nismo tune is nothing special - just slightly less crappy than the OEM tune if its even different at all. Regardless, the differences are going to be so minimal that it's not...

Keep their $500 and pull the fuse Sent from my iPhone using Tapatalk

Hahaha yea thats just bad at 6 miles, NISSAN shouldve really do something about this issue its really annoying

Its great to know that Joe at Zspeed and Southbend stands by their products and offers help when needed. I just had my Southbend Stage 2 Daily Clutch Kit installed today. Currently in the breaking in...

Maybe I'm late to the party, but I didn't see any specific threads about this. 0w30 formerly known as the good ol German castrol we all love is no longer German. Still wears the "European formula"...

AK, Very good DIY. Iave have my first HPDE event coming up next Sat and after reading a bunch of threads on breaks, break fluid etc... I figured better safe than sorry so I puchased the motion...

This happened to me yesterday at 46,000 miles. Thinking about the Z1 Clutch Concentric Slave Cylinder Elimination Kit from Z1motorsports. Any suggestion?

For track application I would do this upgrade. https://www.z1motorsports.com/z1-products/z1-motorsports/z1-clutch-concentric-slave-cylinder-csc-elimination-kit-p-7340.html If the z1 CSC fails it's...

Doesn't sound like much, but then again, I've boiled my clutch fluid after one lap (2 minutes). When the pedal drops to the floor, you can lift it up with your toe and pump repeatedly to get it back....