pbs370z

Hey man I noticed you have a lightened flywheel on your Z, how is it compared to your original flywheel. Noise chatter acceleration your over all impression if you don't mind. I wanna upgrade my clutch flywheel and diff and I wanna go to a lighter flywheel but I'm getting conflicting answers can you help me out?

FWIW, I have an update. My cylinder just recently failed; it failed towards the back at the plastic threads where the smaller part of the cylinder meets the larger part of the cylinder. I paid $60...

This is a good thread. I was asking this question over here and facebook group a couple weeks ago since I need to replace my CSC asap. But unfortunately didn't get much feed back. But here is what...

I'm running the RPS clutch / Tilton setup that Specialty Z sells, but if I had to do it again I'd go with the Z1 delete. The fact that, if anything fails again, the parts are outside the transmission...

The Z1 delete option is very nice. Wish it would of been out a lot sooner.

I just made the first adjustment on my Z1 CSC Elimination Kit this past weekend. It's been almost 12K miles, and I made a 1/2 turn adjustment on the rearside threaded rod. It took me an extra 5...

The HD slave cylinder was the first solution to the OEM CSC problem. The delete imo is the best option.

I have dyno results From sea level (ZcarGarage in San Jose California) and at 6000 feet (MAC Autosports in Parker Colorado.) Stock dyno (base/reference dyno) in California: 293.6 whp/248.27 q...

This is what I put in - Red Line Synthetic Oil - Gear Oil for Manual Transmissions - MT-85 75W85 GL-4 Gear Oil (http://www.redlineoil.com/product.aspx?pid=140) I'm really not sure what the issue...

I'm fairly sure the directions have changed since I did this (it HAS been years, after all...). That being said, I've done several oil cooler installs. Z1 Motorsports install I prefer, as the oil...

Well take a "page out of my play book". Like many who attend car meets/shows who have a sign displayed of mods/dyno runs of their car, I also intend to have a sign of CSC failure. I'm including...

They do not take the time to let it drain properly. I'm too old to be crawling under a car, but I'm gonna do it!

Should be illegal .

I dynamatted the doors & trunk this past weekend by myself. Took about 6 hours total and costed $160 for dynamat & tools. Bought the 7 sheet pack from Amazon, that's more than enough. It does...

I think a lot of the "cabin noise" controversy arrises from the intent of the driver. If you want an aggressive sports car that reinforces the sports car experience with every turn of the wheel the...

That's true... Maybe should start a petition and try and get it to pass around on other forums and sites like autoblog or jalopnik... The G37's and newer 350Z's (i'm assuming G35's too) had/have this...