Martijn_b

haha I will think about it. That's a lot of work lol. I would have to source a lot of stock parts too. I will keep you in mind if I decide to sell.

MA-M recommended and set the boost for 93 at 12psi - Stock CR 11:1

Topgunz, they are the same pulleys that are offered in the kit that you sell, the supercharger is NOT being overspun, which is the point I believe that you are trying to make here...

If you used a stock bore piston, that can be sort of typical. They will often arrive too small to meet recommended piston to wall clearance for their alloy. I learned the hard way with that on the...

Being so close to Temecula, I ordered the Status seats for the car. Heard good reviews for them and wanted to save a little money, plus I wanted to be different. Not many people rock the seats, you...

I have talked with Brian today. We have decided on a solution and what we need to do going forward. He has talked with the machine shop that built my engine today also. We are still gathering...

http://www.the370z.com/members/sirnixalot-albums-general-picture103687-virtual-dyno-settings.png Obviously you'll have to alter the weight and tire diameter to suit your setup, and possibly add...

I think this is what Forged Performance tried on the all Carbon 370z build some years ago. IIRC it did have a head gasket failure, but id have to double check with the owner to be sure. Any machine...

I will figure it out guys. I am just doing what nobody has attempted before or even documented. I have a good idea of what I need to do. I just need some conformation and I may not have that for a...

So in the recent news of what happen to spooler, I may forgo the stand alone this year and do some uncharted features to the block to stop it from pushing coolant through the heads. O ringing and...

For cooling I would look at getting Trackspec hood vents. I think he was running a 20% off deal over the holidays. You need to open up your front bumper similar to what Z1 has done with their time...

He's not going to get to 700whp. Probably mid 600's but the torque will be below 500ft.lbs and it's a sc'd set up so the power isn't going to hit hard like a turbo car so the motor should be fine....

:iagree: I don't know anybody that is doing 700whp on a stock block as a dd. Mine ran for five years between 500 and 600whp. I track it the last three years of its life. If you run at 700whp on a...

Your emotions are all over the place right now. I know that feeling very well. One minute, let's tear it apart right now and see what happened. Who has a full 5 gal gas can, matches, and hot...

You must be using the same camera has BettyZ. :facepalm:

.... "should" being the operative word :driving: