MAMotorsports

Looos like IPP goofed up my heads. So as I need to relash (which entails pulling the cams) I’m in the market for a v2 JWT cam set. I believe all the v1 cam supporting hardware like springs etc will still work . Please give me a call at 361-774-7787 so we can discuss my upgrade. Thanks!
-Cliff (surfdog)

Hey saw your post about stance coilovers with a longer shaft to reach Oem (or near) height. Does stance use a true type coilover? I kind of want to stay with Oem rear spring design to ensure I don't put any extra stress on the body.

^ I slightly disagree with that. I feel that a 370Z that is built with daily driving in mind is very feasible. I think where the issues come in are when a customer/shop build a car that is not suited...

Yeah, new trans on old motor is just fine. To answer your other question, aftermarket rods/pistons with stock crank is also just fine. -Daelen

E85 burns much cooler, thus helping to keep Oil (And other) temps down. and due to that property, it also gives you the ability to play with the timing more without the risk of detonation.

E85 burns much cooler, thus helping to keep Oil (And other) temps down. and due to that property, it also gives you the ability to play with the timing more without the risk of detonation.

Hey guys, I see a good amount of people asking for a quality harness bar. Well, its here! http://www.ma-motorsports.com/wp-content/uploads/2015/08/Alaria-370Zharnessbar-e1438705754124.jpg ...

Hey Guys, A few of you have expressed interest in a group buy so me and RPM got together to work something out for you all! http://www.rpmrollbar.com/images/popups/nissan370z/370-1.jpg ...

E85 burns much cooler, thus helping to keep Oil (And other) temps down. and due to that property, it also gives you the ability to play with the timing more without the risk of detonation.

E85 burns much cooler, thus helping to keep Oil (And other) temps down. and due to that property, it also gives you the ability to play with the timing more without the risk of detonation.

E85 burns much cooler, thus helping to keep Oil (And other) temps down. and due to that property, it also gives you the ability to play with the timing more without the risk of detonation.

Hey guys, My name is Daelen, I work for MA Motorsports here in Glen Arm, MD. Some of you may know us, most may not. We have been around since 1999 building all kinds of crazy Nissans...

I will let you know Since the interest is there, and stock belts seem to be a big factor. We are going to look into making changes if need be to make it work with stock belts. So, if that is...

All signs point to that not being the issue, but in the end it could be possible. Customer brought the car home to remove the bumper and inspect the intake so we did not take anything apart. Just...

All signs point to that not being the issue, but in the end it could be possible. Customer brought the car home to remove the bumper and inspect the intake so we did not take anything apart. Just...

Hey guys, figured I would put this out there. We have and have had many 370Z race cars in and out of here over the years and have since accumulated MANY piles of near new OEM parts. If you have...

I can see how much the rear panel is from Nissan, and make that an option so you don't have to cut the stock one. Not much I can do as far as the carpet goes sadly, its the price to pay for...