Knio

Base Member

Last Activity: 10-19-2024 07:14 PM

About Me

About Knio

Location

Palo Alto, CA

Drives

40th

Statistics

Total Posts

Total Posts: 141
Posts Per Day: 0.03
Find all posts by Knio
Find all threads started by Knio

Albums

Total Albums: 2
Total Pictures: 10
Albums Created by Knio

General Information

Last Activity: 10-19-2024 07:14 PM
Join Date: 05-24-2011
Referrals: 0

Friends

Showing Friends 1 to 4 of 4

bigdog1250

Track Member
DIGItonium

A True Z Fanatic
FricFrac

A True Z Fanatic
Jmg90300zx

Base Member

Likes Received

76 Likes

sx moneypit liked post by Knio On thread : VVT Camshaft Sprocket Phaser check

mine was about 40-50k but I don’t think the mileage was really important as it coincided with a low oil / no oil pressure event. I have a thread somewhere showing how you can easily confirm/deny if...
Liked On: 10-07-2022, 07:05 AM
Posted On: 10-07-2022, 02:33 AM
Rusty liked post by Knio On thread : VVT Camshaft Sprocket Phaser check

If you don't have extra sensors already or want to check the timing without opening the timing covers, I figured out a way to debug with a cheap scope (~$100 on amazon), see:...
Liked On: 04-19-2021, 06:57 PM
Posted On: 04-19-2021, 05:35 PM
Johncastro69 liked post by Knio On thread : Update: Steering Lock issue - Bypass Kit!

Just had my steering lock fail (rev D, was previously replaced from the TSB in 2013). Mine failed in the "unlocked" state (I could still turn the steering wheel), which I'm not sure is normal? and...
Liked On: 10-11-2020, 09:06 AM
Posted On: 11-02-2019, 11:59 PM
elhombre liked post by Knio On thread : P0340

Good news! The last 2 weekends were spent cleaning and reassembling everything. Everything was a success, the camshaft sensor outputs are good, nothing leaks, and the car runs and drives with zero...
Liked On: 01-29-2020, 09:07 AM
Posted On: 01-27-2020, 10:05 PM
sx moneypit liked post by Knio On thread : P0340

Good news! The last 2 weekends were spent cleaning and reassembling everything. Everything was a success, the camshaft sensor outputs are good, nothing leaks, and the car runs and drives with zero...
Liked On: 01-28-2020, 08:04 AM
Posted On: 01-27-2020, 10:05 PM
Ghostvette liked post by Knio On thread : P0340

Good news! The last 2 weekends were spent cleaning and reassembling everything. Everything was a success, the camshaft sensor outputs are good, nothing leaks, and the car runs and drives with zero...
Liked On: 01-28-2020, 07:57 AM
Posted On: 01-27-2020, 10:05 PM
old guy liked post by Knio On thread : P0340

Good news! The last 2 weekends were spent cleaning and reassembling everything. Everything was a success, the camshaft sensor outputs are good, nothing leaks, and the car runs and drives with zero...
Liked On: 01-28-2020, 06:39 AM
Posted On: 01-27-2020, 10:05 PM
SteveSAS liked post by Knio On thread : P0340

I got the new sprockets/phasers delivered and tried to take some nice pictures. It was hard to get the camera perfectly aligned, but the B one might be very slightly off too. ...
Liked On: 01-17-2020, 05:00 AM
Posted On: 01-17-2020, 12:07 AM
old guy liked post by Knio On thread : P0340

This has been by far the biggest job I've done. I've been working slowly over the last two weekends and now have everything removed and am ready for replacements. There's a few tricky bits I...
Liked On: 01-15-2020, 11:14 PM
Posted On: 01-13-2020, 11:17 PM
Optimiser liked post by Knio On thread : P0340

This has been by far the biggest job I've done. I've been working slowly over the last two weekends and now have everything removed and am ready for replacements. There's a few tricky bits I...
Liked On: 01-14-2020, 08:56 PM
Posted On: 01-13-2020, 11:17 PM
Rusty liked post by Knio On thread : P0340

This has been by far the biggest job I've done. I've been working slowly over the last two weekends and now have everything removed and am ready for replacements. There's a few tricky bits I...
Liked On: 01-14-2020, 08:47 PM
Posted On: 01-13-2020, 11:17 PM
Ghostvette liked post by Knio On thread : P0340

This has been by far the biggest job I've done. I've been working slowly over the last two weekends and now have everything removed and am ready for replacements. There's a few tricky bits I...
Liked On: 01-14-2020, 08:07 AM
Posted On: 01-13-2020, 11:17 PM
BettyZ liked post by Knio On thread : P0340

So, after taking everything apart, I have still not conclusively found a root cause of my problem. The timing marks all lined up, nothing looked broken, the oil gallery gaskets are all intact,...
Liked On: 01-14-2020, 12:17 AM
Posted On: 01-14-2020, 12:09 AM
BettyZ liked post by Knio On thread : P0340

This has been by far the biggest job I've done. I've been working slowly over the last two weekends and now have everything removed and am ready for replacements. There's a few tricky bits I...
Liked On: 01-14-2020, 12:17 AM
Posted On: 01-13-2020, 11:17 PM
BettyZ liked post by Knio On thread : P0340

61K miles. I've ordered the full timing chain rebuild including crank sprocket, gaskets, the new metal gallery gaskets, screws, and water pump. Those oil pumps are too expensive for me!
Liked On: 12-18-2019, 04:04 PM
Posted On: 12-18-2019, 12:42 PM

Page 1 of 6

Last »

Knio

Base Member

About Me

Statistics

Friends

Likes Received

Mini Statistics

Friends

Albums

Recent Visitors

	bigdog1250 Track Member

	DIGItonium A True Z Fanatic

	FricFrac A True Z Fanatic