jrb55gh

JRB,

As you may or may not know, the Ecutek advanced RaceRom features for the Z are now out. Joe at Dynotronics is looking for a test car to run the features.

Would you be interested? If so, please contact Joe directly.

Let me know.

Thanks.

The flow results are in but sadly only for 1. The lower before and after and 2. The upper and lower together after. We will be doing more soon with 1. TB before and after, 2. upper before and...

Has any body ported a M370 manifold and tried it ?

Car made 6hp and 5tq at peak with ALL the parts and 11tq and 9hp down low. The car made zero between 4500-6500. The consensus is we improved the intake but his cats were holding us back for the...

Info from my partner, nice info! The Jim he's talking about is also setting up a flow bench for us to test and retest the porting to 1. Make it accurate and 2. Possibly make changes for the better...

Update on my situation. I've been datalogging and getting updates. My idle issue has been resolved mostly, it definitely no longer revs up by itself after going into neutral now. The high cold-start...

it wont matter much because the oxygen sensor are still doing their job and will correct your AFR to be where its suppose to be in closed loop ( idle / light cruising ) and then in Open loop...

Thermal insulation is "omnidirectional." It impedes the transfer of heat in all directions. I'm no expert, but it seems to me that a combination of reflective (reject as much as possible) and...

I just modified a set to include CNC'd velocity stacks... testing coming soon.

the only problems with the stock intake system are the narrow wavey accordion pipes and the fact that they're huge and hard to insulate against heat due to their size. it depends what you are...

Ok all i know most of this is rather basic but i thought id create a DIY anyways. First off you will need to remove the brace bar (Yellow boxes) and then the Cover (blue circles) ...

**UPDATE 09/16/14** Installed a Top speed Axle Back in place of the Garageline Axle back to compare the sounds and tones: https://?v=ZwFYs1kv0xc ?v=XyA7-6OKSW0 **UPDATE: 08/15/2014** Ordered...

Sounds like you were having fun with only 10k and done. Mine lasted right at 23k and the rears were done and the fronts had about 5k of life in them. My tires were the Yokohama Advan sports. Were...

it's a waste of time to tune suspension with bad tires

IMHO if you're going to toss out RS3 as not being streetable enough, NT-05 is in the same basic boat. If you're going to hit track events regularly, though, you'll eventually want to be on a tire at...

Ha nice to see some Frog-Towners here! I grew up in Toledo. Gramps used to race stock cars at Toledo Speedway back in the 50's! Have lots of stories from my still alive grams about "sitting in...