Jhill

you can text me at 832 584 7953 for faster response tell me your from 370z forum and i will reply

Did you sell this? or the pumps?

Mr. JHill,

My apologies for not replying sooner. I barely saw this message since you didn't send it to my regular inbox.

Anyhow, thanks so much for your settings, I'm gonna go ahead and give the "Street" version a try and see how I like it. I'll report right after.

As of now, I'm pretty much at stock height, albeit I'm on 18's with smaller diameter tires.
My Rebound settings are 8 front and Rear.
2.0 Front camber 1.8 Rear
0 toe front and a tad in rear.
Sway Bars: Full stiff front and Middle setting on rear. (Stillen).
Car feels very neutral and was able to dialed out a lot of the understeer

Sure thing. When you start the car, it defaults to VDC-on, just like stock. To enable RaceRom:

1. Turn VDC off
2. Adjust the wheel-slip amount using the cruise control accel/decel. When you press up or down, you'll see the current value displayed on the oil temp gauge. It ranges from 0 to 100% (i.e. off to no-wheel slip) depending on what you set it at. I usually start around 50% and adjust from there. You can change it anytime the car is on.

Interesting read. Apparently Nissan does not work like other cars in terms of their fuel trims. How to read CONSULT printout? - Nissan Forum...

Well it won’t have a load calculation because it gets that through the mafs. Without any load calc it will run like alpha n (rpm&tps) and use a map they know will run from internal testing. This...

I don’t think he offers either those rates. You’ll be looking at a 12k fr / 10k rear or a 12k fr / 11k rear (swift) for the SS coilovers or 13/11 for the RT coilovers. I went 12/11 SS and they...

I don’t think he offers either those rates. You’ll be looking at a 12k fr / 10k rear or a 12k fr / 11k rear (swift) for the SS coilovers or 13/11 for the RT coilovers. I went 12/11 SS and they...

Here mass maybe this will help you. As I said people used to always comment on how ti springs felt different/better than steel and often commented as being "plusher". Now that these new alloy...

I don't think there is a difference in force output andI don't believe anyone here is actually thinking that. I believe this whole thing got derailed because of nitpicking terminology. I don't...

Here mass maybe this will help you. As I said people used to always comment on how ti springs felt different/better than steel and often commented as being "plusher". Now that these new alloy...

Here mass maybe this will help you. As I said people used to always comment on how ti springs felt different/better than steel and often commented as being "plusher". Now that these new alloy...

I think what hotrodz. Was getting at is the swifts "feel" softer which probably means more compliant. If we take for example a spring that is 400lbs per in and a block of rubber that is 400lbs per...

I think what hotrodz. Was getting at is the swifts "feel" softer which probably means more compliant. If we take for example a spring that is 400lbs per in and a block of rubber that is 400lbs per...

I think what hotrodz. Was getting at is the swifts "feel" softer which probably means more compliant. If we take for example a spring that is 400lbs per in and a block of rubber that is 400lbs per...

I second the powertrix. I road and track them as well as some extended trips and am pleasantly surprised with what you get for what you pay. I wouldn't doubt fortune are in the same boat but after...

I second the powertrix. I road and track them as well as some extended trips and am pleasantly surprised with what you get for what you pay. I wouldn't doubt fortune are in the same boat but after...

I like how yours came out axmea and hoping for something similar with a little more flair. If I ever get these 3D printed then I'll see how it looks.

I like how yours came out axmea and hoping for something similar with a little more flair. If I ever get these 3D printed then I'll see how it looks.