ByThaBay

Hello, I have been told, that maybe you can help me with ECU for 2009 370Z.

It looks like I have to replace mine becouse there is some problem and it can´t send signal to 4th cylinder coil.

So I can buy similar ECU for around $200 localy or I can send it for repair ($250-350) but I don´t know if I can clone my SW by MPPS cable. Car has uprev sw from previous owner so I would like to clone everything to new one. Also I don´t know what should I do with immobiliser and keys ID etc..

Can you help me please? I´ve been told, that maybe you are able to sell me one allready prepared for my car?

and last thing is that I am from Czech republic, Europe. So there could be expensive shipping and import taxes.

Thank you

To confirm you’re tuned correctly plot the afr target against the actual afr for each bank and the lines should follow each other relatively close. As far as the targets themselves, that becomes...

3.7L stock fuel targets141483 These are set intentionally rich from the factory because there is no fuel control on this ecu during open loop. You can add an open loop fuel control strategy by...

Yes this is correct, which is why I brought up my 100% software solution, no wires get cut and all Evap functions remain at 100%.

Yes this is correct, which is why I brought up my 100% software solution, no wires get cut and all Evap functions remain at 100%.

Generally yes, but I also have a software based solution that leaves all emissions equipment 100% functional by computing ethanol content from exhaust gas content using built in sensors. It’s not...

I can fix this send me a PM

There are a variety of things that can cause the issue. I troubleshoot them on a case by case basis.

There are a variety of things that can cause the issue. I troubleshoot them on a case by case basis.

Your baseline is pretty high, looks to be about a 5% improvement only. Was the car already tuned for the baseline?

:tup:

From my experience tuning many customers boosted vehicles with ecutek, I find it critical that the actual torque reported by the ECU matches actual torque as closely as possible. You will find...

From my experience tuning many customers boosted vehicles with ecutek, I find it critical that the actual torque reported by the ECU matches actual torque as closely as possible. You will find...

4 hours is very close relatively speaking , husam is a top notch tuner. Can’t go wrong!!

This can be done very easily with ecutek. The bluetooth unit can log to your mobile device whenever you are operating the vehicle. No additional connections or gauges need to be added. Again,...

Seb knows how to do it, he will take care of it for you.