bmarcinczyk14

These are stillen sways

I went with what Ryan @ Forged suggested....he created this devil of a set of wheels & rims with me simply agreeing to it. Seems DannyGT had 285's on the front at one point and he had to scale down to 265. So, I'm guessing you can go even bigger if you're willing to try it. I can say this....it sticks like glue!

Fronts are rubbing....rears seem to be perfect!

ohh rubbing, that doesnt sound good. is it severe rubbing or just minimal when you take corners hard? i heard you should be able to get 305 width tire on the 370z without a sweat, but i guess its mostly because your lowered right? hope that fixes it for you!

So far so good.....just working on stopping the rubbing thats happening due to the plastic pins on the inside of the fender near the top. I'm going for a corner balancing and alignment this Friday. DannyGT had the same issue and those two things helped him. Hopefully it'll do the same for me!

love them, yeah night and day

So far, none at all. Outside of adding the coilovers that was all. Forged put them all together for me down in GA. and they shipped 'em to Altered Atmosphere in MD. I wasnt there when they switched out the stocks but from what I understand it was just a quick switch.

Hey, looks like you are talking with Ryan over in the wheels/tire thread. I believe they are lighter but you may want to ask Ryan in the thread. I actually sent him a pm so if he doesn't answer there I'll let you know via PM.

Bingo.

RWD as a general rule of thumb handles better than awd because you are using all of the grip in the front tires to steer, not to steer and drive the car. AWD is nice, loads of traction there, but RWD handles better.

I believe most paste waxes have a petroleum base, some use different types of solvents to soften the wax. If they didn't it would be hard as a brick. If in fact it was gasoline, like Southark...

See me next week after my tune, and ill take you for a ride in mine ;)

Here is the result from the last customer (couple of days ago) that dynoed wit this kit....10psi and 400ft/tq at the wheels at 3,500 wouldn't be considered as "lag" in my books: ...

http://www.the370z.com/members/falconfixer-albums-misc-picture73999-trollsm.png I smell a troll

I'm sorry but that is fvcking retarded, Andrew... Without an oil cooler, my typical oil change is 5 quarts plus a little from the extra quart I keep around to top off when necessary. I would...

Nor did they check it after they "finished". Sloppy work.

Some of this is a bit odd; a bit like the texting teen thread on the forum earlier in some aspects. Somebody starts a thread expressing condolences to the family, some others do the same, then there...

As soon as the car's in motion, the passenger has no control. Who's to say he wasn't begging the guy to slow down?

I know what you're saying, but I don't know why it's that way. Apparently there is significantly less material on the front nismo wheels than the back as compared to the front and back of the sport...

VHR vs HR with the same supercharger... interesting conversation. Think of PSI as your measurement of how much your engine is restricting the air leaving the supercharger. Take everything...

Yes. The 37vhr flows better and is more reliable when boosted. Look around in the forced induction section here on the forum and you'll see some great results.

In fashioning a DIY 'blocking plate' for my oil cooler (19 row by the way) due to the loooong warm up times during winter times, I did the following. Wanting a lightweight but durable blocking...

Thanks for checking. I seen that one for $479.00 not bad. Still beats a lot of the g3 prices I have seen. The 40th is looking good keep it up. My 2 cents though I’m just not feelin the front plate...

You should let me diagnose it before taking it to a shop and paying money. PM me on facebook and we will set something up for next week.

Headers will have more volume. Period. Not that it's good/bad, just letting you know to expect it. You will have some rasp above 5k, but nothing obtrusive. They give it that "raw" feeling like...