bdl99

Hi Brian,

I bought a backup camera kit for my 2010 370z Roadster from you back in 2011. It has worked well for me, but lately the camera has only been working intermittently. About half the time it shows a blue screen and half the time it works. I checked the wiring and there aren't any frayed wires or loose connections. Do you have any ideas. Do I need to replace the camera? If so, can I get one through you.

Thanks,
Mark Goddard
mark@goddardfamily.net

hey dude,

been following up on your thread and would like to get in on purchasing the by pass kit. i have a 2010 with navigation set up. i am not too concerened with having the nissan heated seat switch if its gonna delay things, just want to get this by pass as soon as i can, i tried to order from your site but it said item out of stock.

Any chance you have these again? i dont mind getting my hands dirty at all. even if you give me some tips on which wires i need to splice up and cut that will be greatly appreciated it too.

thanks,
-Fred

If you have a question or inquiry please send me a PM or email me because I don't receive any notification of visitor message and don't want to cause any delay in responding.

email: Brian@CarKitCompany.com

Hi Brian

Over the next few days, I'm about to swap my MY06-350z Coupe for a MY10-370z Roadster [UK-2011 plate] and looking to fit the back-up / reversing cam; after speaking with a few (other well known) 350z forum members they suggested I ask you about it. I'd like to understand what is involved to fit it on a 2011-MY10 Roadster; How much would it cost for just the wiring harness including shipping to the UK? ..and how much for the complete kit (including the cam?); Thanks a million.

I fitted an aftermarket HU and cam myself in the 3250z Coupe; but just wanted to understand how difficult this would be on a Roadster.

Mark aka aftershox (UK)

Hey man, I finally made it to DC and now am close enough to NJ to make a trip up for my camera and bypass install. Do you charge extra to do the install? Also, I want to add the top mod install (so I can open and close the top with the key and only use one button) since everything will be apart, can we add that to the install day? Let me know if you are still up for everything and around where in NJ you are so I can figure out time/distance to drive up. Thanks a ton man, looking forward to these cool mods! Mo

Hi brian,

Have just bought a uk 370 and im after the wiring loom for the back up cam. Could you tell tell me how much it would be to ship to the uk.

Thanks very much.

Mark

bdl99, do your bypass switches work with aftermarket HU's? I checked out your website, very clean look with the switch.

Thanks

Tommy

Hey mate,

I am in Australia and have the 2010 Roadster. I will be doing the check on my NAV Unit as suggested on your site.

But I have a few questions if you could please answer:
1. Have you sold to any Australian buyers and has it worked for them?
2. What is the difference between the harness and the camera?
3. I am interested in the bypass + camera kit. Will the grid lines move along with the steering as shown in the video on your site?
4. In the video also the car beeps when reversing - in the 370z how do you achieve this without any sensors?

Thanks.
Leo

Hi there, based in the UK, are you still building / shipping backup camera harness?

Many Thanks, John

I have a 2010 370z what do I need to add the backup camara.

Ordered the kit a week ago, just got the kit. Neatly boxed and wrapped. I am writing this post after install. 72411 Comes with 6 pages of color instructions. Take off two pieces of trim,...

Ordered my bypass harness and installed today. Car starts and runs fine, also a super easy install. :happydance:

Received my harness yesterday! Gonna hook it up today!

Only thing I know to tell you is search through the SLU threads - I don't think anyone has compiled a list. If you compile a list of SLU vendors, please post the list and be sure to add a link to it...

It doesn't really matter. You can install the harness, retract the lock, and then break the brown wire. Or retract the lock and install the harness with the brown wire broken. As long as the lock is...

I preemptively cut the brown wire last night. Own a 2011 Nismo w/ 6k miles, lock was rev. C, car build date of Oct. 2010. Thanks for all the research into this.

Success!! I did the headstand thing and wedged my 6'5" 265 lbs self up under there and whacked the SLU two dozen times with a hammer. Tried the button several times along the way and then finally...

my o9 failed last night. never fails 3o* outside stranded in a target parking lot at 6 pm FML!!!!!!not really knowing too many people around here and finally getting a hold of my cousin i had plenty...

I also ordered this from Brian along with the backup camera and Nav bypass, got everything promptly and would highly recommend using Brian's harnesses for all these mods. :D

just saw and reviewed this post, wow scary stuff and expensive it it happens to you! just placed my order today, car is hibernation for the Canadian winter so lots of time to do it before next...

:iagree: I went the cheap route and pulled the fuse (an easy job, but not for the faint of heart), but it is nice to have an option. It looks like it is a well-constructed unit (and buyer reviews...

:iagree:

I cant say enough thanks to the developer of this item. Well done! Nice professional alternative to pulling the fuse if you are not comfortable with that option. At least there are options!

Ack... I have been inactive on the forms of late... but glad I stumbled across this! Putting an order for the harness in today!

Received mine today! Thanks. http://i1188.photobucket.com/albums/z410/Gale4ce/Car%20forums/023538b5b2c90ab68c38aa869970586c.jpg