12nismo

Were you in the Rancho Cordova, CA Starbucks this morning by chance? Saw a Nismo with exact color and graphics. You profile states you're in TX, so if it's someone else, the resemblance was uncanny.

Yeah man, check out my build thread there's a vid on there.

Hey Bryan, It's kinda homemade and I have one U can have and try if U want
Look on my pic album, i think its on there. Consist of a Coupler, piece of All-thread and a jam-nut. If U want to call me-832-326-8899 Pat

See: http://www.the370z.com/members-370z-...ml#post2862501

Hmm that's a tricky question, I think I'll respond and link in my journal thread since it's noteworthy.

Gotcha, I was worried anbout having the same issue as you, but I dont have a cam Actuator code. whew! Thanks bro!

no i had no individual cylinder codes just a p0300 and a cam timing code because enough oil wasn't getting to the cam actuators.

The individual cylinder codes are p0301-p0306, there is a lot of stuff that can cause p0300 try to fix any codes that may come up with it first.

I asked JTran about it, he said it's reading in lambda units and it can probably be switched. I just talked to Ronito, I'll see y'all Saturday.

It will read AFR's but it's in some other kind of measurement. I did not mess with it too much because I have a Innovative wideband. There is not a sensor for wideband only 1 temp. sensor, 1 pressure sensor and 1 boost sensor. I'll be happy to help out with the infometer for a fellow Zer! I'll be at the shop Tuesday and Saturday of this week.