YzGyz's turn!

YzGyz · 06-18-2015, 12:59 PM

I'm actually going to get to bed as I have to work tonight. I will look for insurance to cover the new improved car this weekend. I have to put the bumper back on and detail, wash, apply synthetic protection on the paint, then wax her.

YzGyz

jwick · 06-18-2015, 01:00 PM

Quote:

Originally Posted by YzGyz

All done! I finally got to drive her! The local shop guys are masters!! There were some hiccups on my part but they fixed it. Johnny said the engine has more left in her but we are both fine with the numbers. Big smile!

I don't know how many lbs of boost it was dynoed at. Johnny said drive her around for a bit off the springs then come back when I'm ready and turned the EBC off.

YzGyz

Looks like he tuned you right about where he stopped for me. Wonder if you ran out of injector duty too. Might have to run by the shop and talk to Johnny

carlitos_370z · 06-18-2015, 01:13 PM

nice numbers dude!

YzGyz · 06-20-2015, 10:38 PM

Yupper Jwick, similar to your numbers. These numbers are plenty good for me. I DD my car everywhere so I'm OK with her. Those shops guys are freeking awesome! They found some of my F-ups and fixed it (with a few F-YOU kiddingly) no problem. Johnny was like, "don't worry about the total yet. Amber will let figure that out when she gets here. Just drive her around then stop by one day to pay it off. Go enjoys it for a while."

Soo cool of him/the shop. This shows me that they are more about the job and service as appose to just $$. I did go and pay whatever number they had already calculated that I owed.

Todays was an eventful day. I went to Harbor Freight and bought a big cheap tool box. Now I have to organize the 100's of tools in it. My battery is 5 years old and been pulling my audio system for a while now. My car needed to get a jump to start once in a while so I went a bought a new battery at Advance with a 40% off coupon! WIN!!!!

Tonight was STEAK NIGHT so BIG WIN there again!!

After the meal, I put my front bumper back on and went to the gas station as I was on E. This was my first joy ride since I picked her up. Man she feels good!! the turbo sound is crazy cool! and the PHHHH!!! Chuck, Jwick and everyone else is right. It's damn worth it! I hope it stays dry tomorrow so I can take a longer drive with her.

YzGyz

YzGyz · 06-29-2015, 07:03 PM

I had a bothersome tapping noise as I accelerate from a stop. It appears to be the pipe that comes pre smoothed. The pip was tapping that big screw under it. I took the pipe out and gave her a few taps with a hammer to dent her some more. When I reinstalled it, I turned it to give as much clearance as possible. I took a short test drive and I think I got it fixed. Time will tell.

So far, the car is a total hoot@! Vroom!! Phhss!

YzGyz

jwick · 06-30-2015, 08:38 AM

Yeah. I've still got one I can't seem to find. I finally said **** it.

YzGyz · 06-30-2015, 04:40 PM

The knock was really bothering me. I had looked fir it 2x prior and did not succeed. Luckily the pipes are powder coated so I was able to see the scuff marks where it rubs. After I pounder the dent in a little more for clearance, I sprayed it black in case it rubs. That way, I will be able to see new scuff marks if it rubs.

YzGyz

YzGyz · 07-18-2015, 01:55 AM

Slow am I, YES YES! I just came back form the 1/4mi track. What a learning experience. This car is hard to launch! I tried it once w/o VDC and I peeled out all the way through 3rd gear and part of 4th. The speedy read 90 but I only moved probably 100ft. Let's jsut say I left the VDC on after that run. It was really fun though. It's all about the launch!

Anyhoo, I'm going to have to go do it again.

YzGYz

jwick · 07-18-2015, 08:34 AM

That must have been a badly prepared track. You shouldn't be slipping after first in a properly prepped track.

You on full boost or still spring pressure?

YzGyz · 07-18-2015, 05:06 PM

Spring

Or because I don't know how to drive. Lol. It's totally different from a dig vs rolling. I didn't know it's that much harder. Now I do.

YzGyz

YzGyz · 07-22-2015, 01:24 PM

It's been over 1000 miles since install and I admit, I LOVE BOOST!

I just had my car in the air to have a quick inspection of the turbo system and to find this inferno clunking I feel and hear when I load then unload the drive train.

Turbo system - everything good and working great. My oil lines are good. No leaks or anything... Yosh!

Clunk- It turns out to be minor free play in the rear diff. When I unload the drive train when releasing the gas, and the car starts to drags a little, this little bit of free play creates a clunk. When I hold the tires still and just turn the DS, it moves maybe 2mm or 3mm. I know it's not a lot but I still feel it. Imagine using a sledge hammer tapping the back of your car ever time you get and then off the gas. The only difference is this hammer is actually the weight of the car itself. Of course the swing is only a distance of 3mm but it's a heck of a lot of weight.

On a side note, I went and took a look at the pipe that was tapping my frame before. It seems that my hammer knocks worked great. No rub marks on the new paint I put on it. You can see the area where there is a deeper impression due to that bolt hitting and rubbing it prior to the fix.

Another thing I encountered since the turbo is having ran over a part of a brick or something on the highway. It looked to be the size of a tape measure. I didn't have time to react to it and the best I was able to do was slam the breaks some. I hit that thing and it exploded under my car! A sudden outcry of bad words and was on my way home. I took a look under the car real fast and did not see anything wrong. Heck, the car drove fine the rest of the way home. Then I went to the 1/4 mile that night.. Anyhoo, With the car up and closer inspection, I found this.

This is the pipe that Shasha promises to replace for free if it breaks. This is also the lowest part of my car. the pipe is just dented. She still holds pressure. This pipe is up as high as me and my mechanic can get it up without it knocking into the transmission.
I might make a short side rolling video of the underside and side skirt to show how low/high up the turbo sits for everyone to see.

I guess I will just have to watch out for these road debris more often and not drive as close to other cars so that I may have more time to react.

YzGyz

YzGyz · 07-22-2015, 08:16 PM

Here is a short side view video of the kit to show how high it is. Don't mind the scuffed up side skirt. I scraped it on a extra high speed bump.

https://www.youtube.com/watch?v=3RGw...ature=youtu.be

YzGyz

YzGyz · 08-21-2015, 04:34 PM

I went to the local car mod shop because I wanted to know how there TT C7 project was going along and saw this cool car! I just wanted to share with everyone. I hope the owner don't mind me sharing his car.

YzGYz

carlitos_370z · 08-24-2015, 07:59 AM

waoo that is history man!! looks like new

darkphantom · 08-24-2015, 12:58 PM

So just read through this entire thread and I must say, WOW!!! Props to you bro, for having the initiative and know-how on doing all this stuff to your car.

I do minor electrical mods, but these big mechanical ones like the diff and stuff are just leagues beyond my ability, not to mention this is my daily so I don't have a beater on the side

Anyways, send us some vids of some WOT pulls if you get a chance

06-18-2015, 12:59 PM	#181 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	I'm actually going to get to bed as I have to work tonight. I will look for insurance to cover the new improved car this weekend. I have to put the bumper back on and detail, wash, apply synthetic protection on the paint, then wax her. YzGyz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

06-18-2015, 01:13 PM	#183 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7586	nice numbers dude! YzGyz likes this.

06-20-2015, 10:38 PM	#184 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	Yupper Jwick, similar to your numbers. These numbers are plenty good for me. I DD my car everywhere so I'm OK with her. Those shops guys are freeking awesome! They found some of my F-ups and fixed it (with a few F-YOU kiddingly) no problem. Johnny was like, "don't worry about the total yet. Amber will let figure that out when she gets here. Just drive her around then stop by one day to pay it off. Go enjoys it for a while." Soo cool of him/the shop. This shows me that they are more about the job and service as appose to just $$. I did go and pay whatever number they had already calculated that I owed. Todays was an eventful day. I went to Harbor Freight and bought a big cheap tool box. Now I have to organize the 100's of tools in it. My battery is 5 years old and been pulling my audio system for a while now. My car needed to get a jump to start once in a while so I went a bought a new battery at Advance with a 40% off coupon! WIN!!!! Tonight was STEAK NIGHT so BIG WIN there again!! After the meal, I put my front bumper back on and went to the gas station as I was on E. This was my first joy ride since I picked her up. Man she feels good!! the turbo sound is crazy cool! and the PHHHH!!! Chuck, Jwick and everyone else is right. It's damn worth it! I hope it stays dry tomorrow so I can take a longer drive with her. YzGyz jaytirbhaw likes this. __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

06-29-2015, 07:03 PM	#185 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	I had a bothersome tapping noise as I accelerate from a stop. It appears to be the pipe that comes pre smoothed. The pip was tapping that big screw under it. I took the pipe out and gave her a few taps with a hammer to dent her some more. When I reinstalled it, I turned it to give as much clearance as possible. I took a short test drive and I think I got it fixed. Time will tell. So far, the car is a total hoot@! Vroom!! Phhss! YzGyz jaytirbhaw likes this. __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

06-30-2015, 08:38 AM	#186 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	Yeah. I've still got one I can't seem to find. I finally said **** it. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

06-30-2015, 04:40 PM	#187 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	The knock was really bothering me. I had looked fir it 2x prior and did not succeed. Luckily the pipes are powder coated so I was able to see the scuff marks where it rubs. After I pounder the dent in a little more for clearance, I sprayed it black in case it rubs. That way, I will be able to see new scuff marks if it rubs. YzGyz DEpointfive0 likes this. __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

07-18-2015, 01:55 AM	#188 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	Slow am I, YES YES! I just came back form the 1/4mi track. What a learning experience. This car is hard to launch! I tried it once w/o VDC and I peeled out all the way through 3rd gear and part of 4th. The speedy read 90 but I only moved probably 100ft. Let's jsut say I left the VDC on after that run. It was really fun though. It's all about the launch! Anyhoo, I'm going to have to go do it again. YzGYz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

07-18-2015, 08:34 AM	#189 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	That must have been a badly prepared track. You shouldn't be slipping after first in a properly prepped track. You on full boost or still spring pressure? __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

07-18-2015, 05:06 PM	#190 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	Spring Or because I don't know how to drive. Lol. It's totally different from a dig vs rolling. I didn't know it's that much harder. Now I do. YzGyz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz Last edited by YzGyz; 07-18-2015 at 05:10 PM.

07-22-2015, 01:24 PM	#191 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	It's been over 1000 miles since install and I admit, I LOVE BOOST! I just had my car in the air to have a quick inspection of the turbo system and to find this inferno clunking I feel and hear when I load then unload the drive train. Turbo system - everything good and working great. My oil lines are good. No leaks or anything... Yosh! Clunk- It turns out to be minor free play in the rear diff. When I unload the drive train when releasing the gas, and the car starts to drags a little, this little bit of free play creates a clunk. When I hold the tires still and just turn the DS, it moves maybe 2mm or 3mm. I know it's not a lot but I still feel it. Imagine using a sledge hammer tapping the back of your car ever time you get and then off the gas. The only difference is this hammer is actually the weight of the car itself. Of course the swing is only a distance of 3mm but it's a heck of a lot of weight. On a side note, I went and took a look at the pipe that was tapping my frame before. It seems that my hammer knocks worked great. No rub marks on the new paint I put on it. You can see the area where there is a deeper impression due to that bolt hitting and rubbing it prior to the fix. Another thing I encountered since the turbo is having ran over a part of a brick or something on the highway. It looked to be the size of a tape measure. I didn't have time to react to it and the best I was able to do was slam the breaks some. I hit that thing and it exploded under my car! A sudden outcry of bad words and was on my way home. I took a look under the car real fast and did not see anything wrong. Heck, the car drove fine the rest of the way home. Then I went to the 1/4 mile that night.. Anyhoo, With the car up and closer inspection, I found this. This is the pipe that Shasha promises to replace for free if it breaks. This is also the lowest part of my car. the pipe is just dented. She still holds pressure. This pipe is up as high as me and my mechanic can get it up without it knocking into the transmission. I might make a short side rolling video of the underside and side skirt to show how low/high up the turbo sits for everyone to see. I guess I will just have to watch out for these road debris more often and not drive as close to other cars so that I may have more time to react. YzGyz Spec Jay likes this. __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

07-22-2015, 08:16 PM	#192 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	Here is a short side view video of the kit to show how high it is. Don't mind the scuffed up side skirt. I scraped it on a extra high speed bump. https://www.youtube.com/watch?v=3RGw...ature=youtu.be YzGyz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

08-21-2015, 04:34 PM	#193 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	I went to the local car mod shop because I wanted to know how there TT C7 project was going along and saw this cool car! I just wanted to share with everyone. I hope the owner don't mind me sharing his car. YzGYz jaytirbhaw, Ty99, carlitos_370z and 2 others like this. __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

08-24-2015, 07:59 AM	#194 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7586	waoo that is history man!! looks like new

08-24-2015, 12:58 PM	#195 (permalink)
darkphantom Enthusiast Member Join Date: Apr 2015 Location: Houston, Texas Posts: 425 Drives: 13 Z34 PW M6 Rep Power: 243	So just read through this entire thread and I must say, WOW!!! Props to you bro, for having the initiative and know-how on doing all this stuff to your car. I do minor electrical mods, but these big mechanical ones like the diff and stuff are just leagues beyond my ability, not to mention this is my daily so I don't have a beater on the side Anyways, send us some vids of some WOT pulls if you get a chance YzGyz likes this. __________________ '13 PW M6 \| Takeda \| ARK GRiP V2 \| H&R

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Turn knob and A/C turns on. Can i turn it off?	zmyride	Nissan 370Z Owners Manual / Service Manuals	18	04-24-2015 02:17 PM
Turn down for what	RoadsterST	Movies / Celebrity Gossip / Entertainment / Music	2	03-28-2014 04:43 PM
My turn	RITDR	Audio & Video	4	05-19-2013 07:49 PM
My turn!!!	alvinmathew88	Nissan 370Z Pricing / Ordering Discussions	14	02-03-2011 07:44 PM
First Turn-by-Turn Navigation App for iPhone: XROADS G-Map Review	AK370Z	The Lounge (Off Topic)	5	12-12-2009 01:33 AM