Chance build

VQStryker · 10-14-2014, 11:12 PM

My original Z was a base PW 370z with the GTM STG 2 TT kit (DestinyZ). I sold it for multiple reasons and one was because I wanted to have a nismo and start over. So I bought "Chance" (can you guess how I came up with the name) I got it used about 1.5 years ago and have managed to avoid modifying the car until now. The car has a MXP CBE, injen CAI, TE-37 19x9.5 and 19x10.5 +22 bronze wheels, carbon fiber hood (don't know the brand) and HRE spacers. A little update for my first post on here. So no one offers a TT setup with the parts I want and I do not really want to go single although it was highly considered with the BP V2 kit that was put out but still I was not sure. I looked and I looked, thought about the Greddy but its 8K without fuel or a tune/tuner. Then the wife asked me, "why don't you just do your own single turbo kit?" The wheels started to move, I got on the internet and then they started spinning. Next thing I know I order everything under the sun and here I am, trying to make a TT setup without taking out the stock headers (will do later down the road with garage) and trying to do it cheaply but not with low quality parts. Doing stuff like purchasing used parts off the forum, seemed liked all the used parts I needed started coming out after I had ordered them new. So here I am, I like to build and make things so this will do me well. I hope ppl can enjoy it as much as I will, ill be taking the headaches though

I suppose my goals for the car would be big power and look good doing it

.....too typical? Really my goal is to make 800+WHP and be in the 10's in the 1/4 mile while spending the least amount of $$$ I can but that's a long reach, who knows.

So far I have ran the 1/4 two times in the car and managed a 13.7 @ 104mph on some bald tires, excuses I know but they really are. Should be fun

-Joe

VQStryker · 10-15-2014, 04:59 AM

Here are the items that I have already received in the mail

18x12 +20 Rota wheels rapped with 18/305/45 DRs

Wiesco 9:1 pistons, Eagle rods

ARP head studs

Of course the Uprev cable

HKS SSQV4

Pictures of the clutch/flywheel/csc install I did last week

Clutchmasters flywheel (14.1LBS exactly)

Southbend DXD STG 3 street clutch

CSC

GaleForce · 10-15-2014, 05:17 AM

Excellent work!

Kingbaby · 10-15-2014, 05:32 AM

in for more

VQStryker · 10-15-2014, 07:55 PM

I got more stuff in the mail today, I didn't expect it until tomorrow. I was a little cautious about opening it but when I had seen the boxes I was all in

Garrett GTX2867 with a Tial V band housing

Tial 38mm wastegates

Tadpole · 10-15-2014, 10:03 PM

Subbed. Keep the updates coming

predikt · 10-16-2014, 01:39 AM

Nice! Can't wait to see more

Mbreese · 10-16-2014, 02:56 AM

Excited to follow this build !!

Kingbaby · 10-16-2014, 03:28 AM

is that a small leopard

DEpointfive0 · 10-16-2014, 03:44 AM

You're gonna run... Rotas...

Wonka2581 · 10-16-2014, 06:19 AM

In for more....

VQStryker · 10-16-2014, 10:21 AM

Quote:

Originally Posted by DEpointfive0

You're gonna run... Rotas...

hell yea!!

Quote:

Originally Posted by Kingbaby

is that a small leopard

she is a savannah cat (Serval/domestic mix), photo bombing my pictures.

VQStryker · 10-19-2014, 10:13 PM

Got a chance today for some looks at fitment and clocking the turbos. Think I have a good Idea on placement and how im going to clock them and the only thing that may be a little tricky is getting the oil drain to be at a good angle but we will see.

Order some straight/45/90 degree short let piping and flanges so hopefully next weekend I will be able to get time for serious work and get some progress going.

I wont be doing any internal work until this part is all done, it gets cold in WA and I don't have a garage quite yet so its all outdoors

Here we go, working in the street again...

This was the "sigh....****...." moment for today. I new it was tight but ****, I walked away for a minute and went back under. it then started to look like a good amount of space:

Get an idea of how I want to mount and clock the turbos. Didn't realize how much space the driver side does not have but the passenger was cake.

VQStryker · 10-19-2014, 10:14 PM

Got new lug nuts and some tint

BC416 · 10-20-2014, 10:10 AM

Good stuff man!

And you might have the coolest looking dog and cat I've seen!

10-14-2014, 11:12 PM	#1 (permalink)
VQStryker Track Member Join Date: Jul 2011 Location: Texas Age: 36 Posts: 659 Drives: :( Rep Power: 15	Chance build My original Z was a base PW 370z with the GTM STG 2 TT kit (DestinyZ). I sold it for multiple reasons and one was because I wanted to have a nismo and start over. So I bought "Chance" (can you guess how I came up with the name) I got it used about 1.5 years ago and have managed to avoid modifying the car until now. The car has a MXP CBE, injen CAI, TE-37 19x9.5 and 19x10.5 +22 bronze wheels, carbon fiber hood (don't know the brand) and HRE spacers. A little update for my first post on here. So no one offers a TT setup with the parts I want and I do not really want to go single although it was highly considered with the BP V2 kit that was put out but still I was not sure. I looked and I looked, thought about the Greddy but its 8K without fuel or a tune/tuner. Then the wife asked me, "why don't you just do your own single turbo kit?" The wheels started to move, I got on the internet and then they started spinning. Next thing I know I order everything under the sun and here I am, trying to make a TT setup without taking out the stock headers (will do later down the road with garage) and trying to do it cheaply but not with low quality parts. Doing stuff like purchasing used parts off the forum, seemed liked all the used parts I needed started coming out after I had ordered them new. So here I am, I like to build and make things so this will do me well. I hope ppl can enjoy it as much as I will, ill be taking the headaches though I suppose my goals for the car would be big power and look good doing it .....too typical? Really my goal is to make 800+WHP and be in the 10's in the 1/4 mile while spending the least amount of $$$ I can but that's a long reach, who knows. So far I have ran the 1/4 two times in the car and managed a 13.7 @ 104mph on some bald tires, excuses I know but they really are. Should be fun -Joe VQZ34nismo and Omnibeelzemo like this. __________________ SOLD- Stryker TT super sleeper (12.35 @ 121mph) no gripZ Chance build http://www.the370z.com/members-370z-...ml#post3001583 No Z Last edited by VQStryker; 10-19-2014 at 10:26 PM.

10-15-2014, 04:59 AM	#2 (permalink)
VQStryker Track Member Join Date: Jul 2011 Location: Texas Age: 36 Posts: 659 Drives: :( Rep Power: 15	Here are the items that I have already received in the mail 18x12 +20 Rota wheels rapped with 18/305/45 DRs Wiesco 9:1 pistons, Eagle rods ARP head studs Of course the Uprev cable HKS SSQV4 Pictures of the clutch/flywheel/csc install I did last week Clutchmasters flywheel (14.1LBS exactly) Southbend DXD STG 3 street clutch CSC David Parra, GaleForce, kukpet and 4 others like this. __________________ SOLD- Stryker TT super sleeper (12.35 @ 121mph) no gripZ Chance build http://www.the370z.com/members-370z-...ml#post3001583 No Z

10-15-2014, 05:17 AM	#3 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Excellent work! __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

10-15-2014, 07:55 PM	#5 (permalink)
VQStryker Track Member Join Date: Jul 2011 Location: Texas Age: 36 Posts: 659 Drives: :( Rep Power: 15	I got more stuff in the mail today, I didn't expect it until tomorrow. I was a little cautious about opening it but when I had seen the boxes I was all in Garrett GTX2867 with a Tial V band housing Tial 38mm wastegates __________________ SOLD- Stryker TT super sleeper (12.35 @ 121mph) no gripZ Chance build http://www.the370z.com/members-370z-...ml#post3001583 No Z

10-15-2014, 10:03 PM	#6 (permalink)
Tadpole A True Z Fanatic Join Date: Sep 2013 Location: Lockhart, TX Posts: 1,082 Drives: 13 Nissan 370Z A7 Rep Power: 18	Subbed. Keep the updates coming __________________ Takeda TR3009P Short Ram Intakes, Custom Dual Exhaust, X-Piped with 18" Resonators & TopSpeed Axle Backs. EVO-R Led Third Foglight,

10-16-2014, 01:39 AM	#7 (permalink)
predikt Base Member Join Date: Aug 2014 Location: Los Angeles Posts: 18 Drives: 370Z Rep Power: 11	Nice! Can't wait to see more

10-16-2014, 02:56 AM	#8 (permalink)
Mbreese Enthusiast Member Join Date: Dec 2012 Location: Cartersville,Ga Posts: 331 Drives: Metalic-Gray,09 370Z Rep Power: 32	Excited to follow this build !!

10-16-2014, 03:44 AM	#10 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	You're gonna run... Rotas... __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

10-16-2014, 06:19 AM	#11 (permalink)
Wonka2581 A True Z Fanatic Join Date: Nov 2012 Location: Chattanooga, TN Posts: 3,083 Drives: MY WIFE CRAZY.... Rep Power: 2612	In for more.... __________________ "I have nothing to offer but blood, toil, tears and sweat""Winston Churchill"

10-19-2014, 10:13 PM	#13 (permalink)
VQStryker Track Member Join Date: Jul 2011 Location: Texas Age: 36 Posts: 659 Drives: :( Rep Power: 15	Got a chance today for some looks at fitment and clocking the turbos. Think I have a good Idea on placement and how im going to clock them and the only thing that may be a little tricky is getting the oil drain to be at a good angle but we will see. Order some straight/45/90 degree short let piping and flanges so hopefully next weekend I will be able to get time for serious work and get some progress going. I wont be doing any internal work until this part is all done, it gets cold in WA and I don't have a garage quite yet so its all outdoors Here we go, working in the street again... This was the "sigh........" moment for today. I new it was tight but , I walked away for a minute and went back under. it then started to look like a good amount of space: Get an idea of how I want to mount and clock the turbos. Didn't realize how much space the driver side does not have but the passenger was cake. __________________ SOLD- Stryker TT super sleeper (12.35 @ 121mph) no gripZ Chance build http://www.the370z.com/members-370z-...ml#post3001583 No Z

10-19-2014, 10:14 PM	#14 (permalink)
VQStryker Track Member Join Date: Jul 2011 Location: Texas Age: 36 Posts: 659 Drives: :( Rep Power: 15	Got new lug nuts and some tint Mbreese likes this. __________________ SOLD- Stryker TT super sleeper (12.35 @ 121mph) no gripZ Chance build http://www.the370z.com/members-370z-...ml#post3001583 No Z

10-20-2014, 10:10 AM	#15 (permalink)
BC416 Track Member Join Date: Jun 2014 Location: NJ Age: 37 Posts: 718 Drives: 2012 KAD 6MT Rep Power: 592	Good stuff man! And you might have the coolest looking dog and cat I've seen!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Last Chance	122554	Nissan 370Z General Discussions	0	07-01-2013 09:51 PM
One in a million chance	zmyride	The Lounge (Off Topic)	13	11-17-2010 02:10 AM
Group Buy Second Chance Berk CBE!	aliveZ	Intake/Exhaust	40	09-23-2010 12:14 AM
Any chance for Concept G exhausts?	Stealth_Z	Intake/Exhaust	2	12-22-2009 05:51 PM
Had a chance to go to the Ring	miguez	Track / Autocross / Drifting / Dragstrip	0	05-06-2009 06:56 AM