Stillen Front Facia
 

Here are some pics of my Stillen front facia installed on my magma red 2013 Nismo. You can't really tell from these pics but in the vents I had my painter fade from black to red.

http://www.the370z.com/members/wolfe...re-paint-2.jpg

http://www.the370z.com/members/wolfe...fore-paint.jpg

http://www.the370z.com/members/wolfe...fter-paint.jpg

http://www.the370z.com/members/wolfe...-humps-car.jpg

No change to accommodate DRLs?

Looks outstanding, by the way.

Are you referring to the fitment?

Thank you!

Correct. Is there a place to mount the DRLs?

I've been thinking about getting this front kit with a Seibon CF hood. That fitment looks pretty damn good in pics, only thing I was worried about is it fitting the Nismo. Looks like it does.

I might end up doing this too since I have a dent in my hood and the bumper got scratched up and got a small crack in it. It looks sick.

Did you do the install yourself?

not built into the stillen bumper, you could always do a little fabricating though

The fitment is almost perfect, there is a little gap between the headlights and the bumper but it is hardly noticeable unless you are looking for it.

I did do the install myself, it is pretty easy however you need to replace the washer fluid reservoir which comes with the bumper when you order it. The replacement washer fluid reservoir needs to be drilled in and does NOT use the existing mount locations I also had to heat up the tubing to get it to bend correctly to fit back in the car.

This bumper will fit the Nismo edition (obviously :rofl2:) but you need to trim the splash pan in order to get it to fit properly. What I did is order a OEM standard 370 splash pan (non-nismo) for $55 shipped. The only problem I had is that the clips would not hold going highway speeds so I drilled it out and put in 1/4" bolts with lockwashers so it didn't come off.

The bumper also comes in 3 pieces which I though was weird. There are 2 little "fins" that fit under the headlight to the fender which had to be bolted/glued and smoothed over to make it appear as one piece. if you look closely at the fitment pictures above you can see them.

:tup: i like your car's new look. post up again when you get a metal mesh or something on the mouth. :D

GJ!

Sweet deal, thanks for all the info. I feel pretty good about going for this setup now. Any plans for the grill?

Then again, I'm still not sure how the aerodynamics will play out at 160mph... Is there any data online about this kit? I haven't been able to find anything from Stillen on it.

I don't know of any stats as far as down force or performance for this bumper. My goal for the grill is to have a big a$$ intercooler from a greddy twin turbo kit, but I am a little ways off from affording that. For now I am either going to leave it as it is or put mesh in there painted black with "Stillen" or "Nismo" stenciled in, in magma red.

:iagree:

I love stillen front man! it looks great in that red too brother!

Very Nice! I saw this on stillens facebook

So after too many people asking me "why is there a big hole in the front?" and "is it supposed to be like that?" I have decided to go ahead and order the Stillen mesh for this bumper and also a tow hook which I will have painted to match the car. The parts should be here this week and I will post up pics when she is done. I am also adding a little something extra to the front, you will have to wait till I post the pics to see what it is

Yeah the fitment looks great, man. I have the same but it looks like I have a little dip in the middle front near the hood and the gaps are bigger than I would like on the sides where it attaches near the bumper :(