SIMOTA1's journal....

simota1 · 02-18-2013, 03:37 PM

this clutch ordeal is really gonna hurt my budget... actually... its gonna kill my top secret front bar budget....

since they have to seperate my tranny im thinking of eliminating every possible weak link so ill be installing a new master as well.... and since my car is gonna go in for a clutch job ill be putting a new clutch, lightened flywheel as well

and while im in this mess imma just put in a order for the short shifter from twm as well... imma kill as much things as i can while my car is down... realistically.... my car will be down for at least 2 months

unless i can hustle the money faster.... kinda sucks because i just finished sending payment for titan cans and brackets... the oil cap money will be reimbursed to me.... that money would have definitely have helped this situation

Isamu · 02-18-2013, 03:47 PM

Quote:

Originally Posted by simota1

this clutch ordeal is really gonna hurt my budget... actually... its gonna kill my top secret front bar budget....

since they have to seperate my tranny im thinking of eliminating every possible weak link so ill be installing a new master as well.... and since my car is gonna go in for a clutch job ill be putting a new clutch, lightened flywheel as well

and while im in this mess imma just put in a order for the short shifter from twm as well... imma kill as much things as i can while my car is down... realistically.... my car will be down for at least 2 months

unless i can hustle the money faster.... kinda sucks because i just finished sending payment for titan cans and brackets... the oil cap money will be reimbursed to me.... that money would have definitely have helped this situation

bro, look here at this thread and contact Marti

Aznsensazn · 02-18-2013, 09:47 PM

Quote:

Originally Posted by simota1

UPDATE PICS.... so i finally got my hands on a camera..... i borrowed my friends own... sorry if i aint a good photographer.... im just happy it wasnt raining when i finally rolled out my z.....

and i got a few snaps at it...

FINALLY!!! i dropped it.... wooot woooot

here is a rear shot... i still gotta black out my fairladyz badge and nismo but like.... i had to order a new pair.... so i wont dread on trying to put it back on after i took them out... it was a good thing i didnt put them on yet cuz... it would have been a waste..... u can also see the tinted tails.... i also tinted the outline.... i thought it gave it a more distinct character...

O and one more thing u can see the holes from the crash....

Hey Simota1.... did you paint the red lip around your wheels or did you use pinstripe tape? If you used tape... then what kind of tape was it if you don't mind me asking.

simota1 · 02-19-2013, 01:27 AM

Quote:

Originally Posted by Aznsensazn

Hey Simota1.... did you paint the red lip around your wheels or did you use pinstripe tape? If you used tape... then what kind of tape was it if you don't mind me asking.

i used the pinstripe tape for motorcycles... i bought it from ebay... although the one i bought it from does not sell em no more.. im pretty sure you can still find another buyer though

Huck · 02-19-2013, 01:49 PM

Quote:

Originally Posted by simota1

this clutch ordeal is really gonna hurt my budget... actually... its gonna kill my top secret front bar budget....

since they have to seperate my tranny im thinking of eliminating every possible weak link so ill be installing a new master as well.... and since my car is gonna go in for a clutch job ill be putting a new clutch, lightened flywheel as well

and while im in this mess imma just put in a order for the short shifter from twm as well... imma kill as much things as i can while my car is down... realistically.... my car will be down for at least 2 months

unless i can hustle the money faster.... kinda sucks because i just finished sending payment for titan cans and brackets... the oil cap money will be reimbursed to me.... that money would have definitely have helped this situation

Damn Simota, sorry to hear about your luck man. I'm guessing that's not something you have the means to do yourself? It would save you a crap load of money. It really sucks that our CSC's are made of freakin plastic. Who's idea was that? It's wise of you to just put the rest of the parts on while you're at it, it's gonna be taken apart anyway... Hope it all works out for you man!

Sent from my iPizzle using magic and new-fangled science stuff

simota1 · 02-19-2013, 02:22 PM

Quote:

Originally Posted by Huck

Damn Simota, sorry to hear about your luck man. I'm guessing that's not something you have the means to do yourself? It would save you a crap load of money. It really sucks that our CSC's are made of freakin plastic. Who's idea was that? It's wise of you to just put the rest of the parts on while you're at it, it's gonna be taken apart anyway... Hope it all works out for you man!

Sent from my iPizzle using magic and new-fangled science stuff

this kinda project is definitely outa my league man .... if the slave was outside our trannys... then no problem i can do that... but since i gotta seperate the tranny

thats a massive job.... and one that im not willing to do.... all in all after getting the qoutes i know how much ill be spending... this is the breakdown

$1400

HD CSC
JWT CLUTCH
SOUTHBEND FORGED STEEL FLYWHEEL
TWM SHORT SHIFTER
MASTER CYLINDER
MOTUL FLUIDS

$80 to tow my car to my friends shop

$800 for labor

grand total $2280

this sucks balls so much... im just tryna not think of it to much yet... im debating wether i put in some unorthodox pulleys also crank and alternator since im in this mess....

whoever designed our CSC and made it plastic should get fired

Isamu · 02-19-2013, 02:25 PM

I told Marti to look out for a mssg from you, he will take care of you bro

simota1 · 02-19-2013, 02:34 PM

thanks bro

Isamu · 02-19-2013, 03:26 PM

Quote:

Originally Posted by simota1

thanks bro

fer sure! helping out two bros at the same time

Huck · 02-19-2013, 04:14 PM

Yeah I feel ya on that one, I changed out the CSC on my 99 S10 back in the day. It was way more difficult than it should have been because it was dropped 3" and the guy that had it before me hadn't cut the driveshaft, so it was jammed into the rear diff. When I finally got it off bits and pieces or my gears fell out of the housing. I had to replace the whole rear end, cut and balance the driveshaft, and THEN do the CSC. Major PITA.

Sent from my iPizzle using magic and new-fangled science stuff

simota1 · 02-20-2013, 02:21 PM

Quote:

Originally Posted by Huck

Yeah I feel ya on that one, I changed out the CSC on my 99 S10 back in the day. It was way more difficult than it should have been because it was dropped 3" and the guy that had it before me hadn't cut the driveshaft, so it was jammed into the rear diff. When I finally got it off bits and pieces or my gears fell out of the housing. I had to replace the whole rear end, cut and balance the driveshaft, and THEN do the CSC. Major PITA.

Sent from my iPizzle using magic and new-fangled science stuff

see thats exactly what im talking about.... i know i wont have a problem like that and with the driveshaft... but bringing down the tranny is still a nightmare for me....

ive already put her in hibernation mode.... gave her a wash and covered her... now the wait begins.... imma miss driving her for 2 months

Isamu · 02-20-2013, 02:24 PM

did you contact Marti?

simota1 · 02-20-2013, 02:28 PM

Quote:

Originally Posted by Isamu

did you contact Marti?

yup...

simota1 · 02-23-2013, 08:18 AM

still havent fully decided on the clutch combo... everyone says southbend.... but ive never really heard of southbend and thats why im not yet sold..... anyone wanna fill me in?

GaleForce · 02-23-2013, 08:45 AM

I went with Southbend. I bought mine from Joe at Z-Speed. Highly recommended! Top notch customer service. Excellent shipping. I told Joe what my projected horsepower and torque numbers were and we put together a package to suit my needs.

Once again, highly recommended.

02-18-2013, 03:37 PM	#2086 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	this clutch ordeal is really gonna hurt my budget... actually... its gonna kill my top secret front bar budget.... since they have to seperate my tranny im thinking of eliminating every possible weak link so ill be installing a new master as well.... and since my car is gonna go in for a clutch job ill be putting a new clutch, lightened flywheel as well and while im in this mess imma just put in a order for the short shifter from twm as well... imma kill as much things as i can while my car is down... realistically.... my car will be down for at least 2 months unless i can hustle the money faster.... kinda sucks because i just finished sending payment for titan cans and brackets... the oil cap money will be reimbursed to me.... that money would have definitely have helped this situation __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

02-19-2013, 02:34 PM	#2093 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	thanks bro __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

02-19-2013, 04:14 PM	#2095 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	Yeah I feel ya on that one, I changed out the CSC on my 99 S10 back in the day. It was way more difficult than it should have been because it was dropped 3" and the guy that had it before me hadn't cut the driveshaft, so it was jammed into the rear diff. When I finally got it off bits and pieces or my gears fell out of the housing. I had to replace the whole rear end, cut and balance the driveshaft, and THEN do the CSC. Major PITA. Sent from my iPizzle using magic and new-fangled science stuff __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

02-23-2013, 08:18 AM	#2099 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	still havent fully decided on the clutch combo... everyone says southbend.... but ive never really heard of southbend and thats why im not yet sold..... anyone wanna fill me in? __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

02-23-2013, 08:45 AM	#2100 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	I went with Southbend. I bought mine from Joe at Z-Speed. Highly recommended! Top notch customer service. Excellent shipping. I told Joe what my projected horsepower and torque numbers were and we put together a package to suit my needs. Once again, highly recommended. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mike's Journal	Mike	Member's 370Z Gallery	638	08-11-2023 11:06 AM
KillerBee370's journal	KillerBee370	Engine & Drivetrain	100	08-18-2010 02:58 PM
SIMOTA1 got rear ended.... f*ck	simota1	Exterior & Interior	76	10-18-2009 10:13 PM
Simota1 FIRST PHOTOSHOOT!!!! check out some of the pics taken by my friend	simota1	Exterior & Interior	18	07-27-2009 07:55 PM
Imag Z journal	imag	Member's 370Z Gallery	4	05-06-2009 03:05 PM