TerribleONE's FINAL build thread!

carlitos_370z · 02-17-2015, 01:32 PM

Quote:

Originally Posted by TerribleONE

Plan on finding a "closed road" to play around with my old mans 458 and GT-R.

awesome brother!!!

1087 · 02-17-2015, 07:43 PM

Quote:

Originally Posted by TerribleONE

Thanks man. Still haven't had that much time to drive the car but I did make 12psi yesterday and wow is all I can say.

Your results are quite fantastic, congratulations!
I noticed that you have stock internals, with way over 500 RWHP since last year, and now with 638 RWHP, how is your engine holding together that well?
It's anything special that you do to keep it together?
Again congratulations for such an outstanding numbers!

Hotrodz · 02-17-2015, 09:34 PM

Outstanding my friend...I can't tell if the difference I is attributed to the new fuel system as well as the car seem to break the wheels a lot more since my upgrade as well. Looking forward seeing you and your beast again in a couple of months. And the Clifford will be there too, how sweet is that!!!!

cigarclifford · 02-17-2015, 09:55 PM

Quote:

Originally Posted by Hotrodz

Outstanding my friend...I can't tell if the difference I is attributed to the new fuel system as well as the car seem to break the wheels a lot more since my upgrade as well. Looking forward seeing you and your beast again in a couple of months. And the Clifford will be there too, how sweet is that!!!!

locked and set for April..........

-Clifford

TerribleONE · 02-17-2015, 10:26 PM

Quote:

Originally Posted by 1087

Your results are quite fantastic, congratulations!
I noticed that you have stock internals, with way over 500 RWHP since last year, and now with 638 RWHP, how is your engine holding together that well?
It's anything special that you do to keep it together?
Again congratulations for such an outstanding numbers!

Thanks man. Havent done anything at all besides switching to Motul oil when I did the fuel system. I am careful and dont stomp on it when its really warm out and try not to load it up to much. (low RPM 5-6th gear pulls) FI builds one hell of a kit and Seb can tune his *** off.

Quote:

Originally Posted by Hotrodz

Outstanding my friend...I can't tell if the difference I is attributed to the new fuel system as well as the car seem to break the wheels a lot more since my upgrade as well. Looking forward seeing you and your beast again in a couple of months. And the Clifford will be there too, how sweet is that!!!!

You did the Fast-500 right? You will not regret going to ZdayZ man. It is definitely worth the trip. Hope the transport comes in on the lower end though.. Lol

Quote:

Originally Posted by cigarclifford

locked and set for April..........

-Clifford

Cant wait to "slay the dragon" with you guys.

TerribleONE · 02-17-2015, 10:37 PM

A few of my favorites from my shoot with HYPRPWR photography. Lots more to come

[IMG]

RYA_3690 by that370z, on Flickr[/IMG]

[IMG]

RYA_3684 by that370z, on Flickr[/IMG]

[IMG]

RYA_3753 by that370z, on Flickr[/IMG]

Hotrodz · 02-17-2015, 10:56 PM

Nice pics man...and yes I got the Fast-500 fuel system. I will probably do E85 once ecutech gets their act together and hopefully delivers on flex fuel!

GaleForce · 02-17-2015, 11:55 PM

Quote:

Originally Posted by TerribleONE

A few of my favorites from my shoot with HYPRPWR photography. Lots more to come

[IMG]

RYA_3690 by that370z, on Flickr[/IMG]

[IMG]

RYA_3684 by that370z, on Flickr[/IMG]

[IMG]

RYA_3753 by that370z, on Flickr[/IMG]

I really dig his style, I hope to be able to meet up with him while I'm down in April. Great Shots of a beautiful car! Well done!

carlitos_370z · 02-18-2015, 06:42 AM

super great pics bro

TerribleONE · 02-18-2015, 10:18 AM

Quote:

Originally Posted by GaleForce

I really dig his style, I hope to be able to meet up with him while I'm down in April. Great Shots of a beautiful car! Well done!

Worth every penny IMO. I got about 50 usable shots from him. I hope to shoot with him again with the F.I. guys

Quote:

Originally Posted by carlitos_370z

super great pics bro

Thanks man

1087 · 02-18-2015, 05:51 PM

[QUOTE=TerribleONE;3114804]Thanks man. Havent done anything at all besides switching to Motul oil when I did the fuel system. I am careful and dont stomp on it when its really warm out and try not to load it up to much. (low RPM 5-6th gear pulls) FI builds one hell of a kit and Seb can tune his *** off.

Well... that's quite impressive, a very stout engine, great kit and tuner and a smart and wise owner that takes great care of the equipment

SXZ34 · 02-18-2015, 09:36 PM

Man the current exterior is sick. My hour long search today led me to your build. I remember it from the initial FI kit and Zdayz 13 but I didn't know it was white again. My question though is do you have more pictures of the front end. I have Aerojacket full carbon amuse front and sides and I was considering leaving both areas carbon that you did... Also on Pearl white and I just want as good of an idea of what it will look like as I can get

TerribleONE · 02-19-2015, 12:45 PM

Quote:

Originally Posted by SXZ34

Man the current exterior is sick. My hour long search today led me to your build. I remember it from the initial FI kit and Zdayz 13 but I didn't know it was white again. My question though is do you have more pictures of the front end. I have Aerojacket full carbon amuse front and sides and I was considering leaving both areas carbon that you did... Also on Pearl white and I just want as good of an idea of what it will look like as I can get

Thanks man. Yea I will post some up later tonight.

Went and filled up with E85 last night. I love paying 2.25 a gallon.

SXZ34 · 02-19-2015, 12:51 PM

Awesome. Thanks man. I love the idea of both areas accented. Especially in Carbon, I'm thinking it may be a little much for what I'm doing though. I'm making a custom fiberglass splitter to go under the bumper, so it will accent it even more even though it will be a very mild splitter (mainly for a little added protection of my freshly painted bumper haha. I'd rather crack it than crack Pearl white paint.)

TerribleONE · 02-19-2015, 01:06 PM

Quote:

Originally Posted by SXZ34

Awesome. Thanks man. I love the idea of both areas accented. Especially in Carbon, I'm thinking it may be a little much for what I'm doing though. I'm making a custom fiberglass splitter to go under the bumper, so it will accent it even more even though it will be a very mild splitter (mainly for a little added protection of my freshly painted bumper haha. I'd rather crack it than crack Pearl white paint.)

Yea I was on the fence about doing it that way but am glad I went that route mainly because its different then all the other PW amuse cars. It MAY look a little overdone with a customer splitter as well.

02-17-2015, 09:34 PM	#393 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	Outstanding my friend...I can't tell if the difference I is attributed to the new fuel system as well as the car seem to break the wheels a lot more since my upgrade as well. Looking forward seeing you and your beast again in a couple of months. And the Clifford will be there too, how sweet is that!!!! TerribleONE, GaleForce, 1LIFE and 2 others like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

02-17-2015, 10:37 PM	#396 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	A few of my favorites from my shoot with HYPRPWR photography. Lots more to come [IMG] RYA_3690 by that370z, on Flickr[/IMG] [IMG] RYA_3684 by that370z, on Flickr[/IMG] [IMG] RYA_3753 by that370z, on Flickr[/IMG] FairladyZ10PG, Amuse370z, Fern to the Z and 12 others like this. __________________ 638WHP 541WTQ @ 13.5PSI Build thread

02-17-2015, 10:56 PM	#397 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	Nice pics man...and yes I got the Fast-500 fuel system. I will probably do E85 once ecutech gets their act together and hopefully delivers on flex fuel! GaleForce and cigarclifford like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

02-18-2015, 05:51 PM	#401 (permalink)
1087 Base Member Join Date: Mar 2013 Location: Cypress CA Posts: 130 Drives: 12 370Z BS M6 Rep Power: 12	[QUOTE=TerribleONE;3114804]Thanks man. Havent done anything at all besides switching to Motul oil when I did the fuel system. I am careful and dont stomp on it when its really warm out and try not to load it up to much. (low RPM 5-6th gear pulls) FI builds one hell of a kit and Seb can tune his *** off. Well... that's quite impressive, a very stout engine, great kit and tuner and a smart and wise owner that takes great care of the equipment TerribleONE and Hotrodz like this. __________________ SUPERCHARGED-453-337-STILLEN EXHAUST & SWAY BARS-B-LINE HFC-EXEDY-K&N-MISHIMOTO-SETRAB-KW VARIANTS COILOVERS-SPL CAMBER & ARMS KIT-GT SPEC 6 BRACES-WELDS WHEELS-STOPTECH ROTORS-POWERHOUSE AMUSE-LATHEWERKS-PIONEER HEAD UNIT-LEATHERSEATS-SAP KIT

02-18-2015, 09:36 PM	#402 (permalink)
SXZ34 Base Member Join Date: Jan 2010 Location: Kennesaw Georgia Posts: 182 Drives: 12 PW 370Z Sport 6MT Rep Power: 15	Man the current exterior is sick. My hour long search today led me to your build. I remember it from the initial FI kit and Zdayz 13 but I didn't know it was white again. My question though is do you have more pictures of the front end. I have Aerojacket full carbon amuse front and sides and I was considering leaving both areas carbon that you did... Also on Pearl white and I just want as good of an idea of what it will look like as I can get TerribleONE likes this.

02-18-2015, 06:42 AM	#399 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7586	super great pics bro

02-19-2015, 12:51 PM	#404 (permalink)
SXZ34 Base Member Join Date: Jan 2010 Location: Kennesaw Georgia Posts: 182 Drives: 12 PW 370Z Sport 6MT Rep Power: 15	Awesome. Thanks man. I love the idea of both areas accented. Especially in Carbon, I'm thinking it may be a little much for what I'm doing though. I'm making a custom fiberglass splitter to go under the bumper, so it will accent it even more even though it will be a very mild splitter (mainly for a little added protection of my freshly painted bumper haha. I'd rather crack it than crack Pearl white paint.)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Final Build Thread for My Z33- She's Done	Waiz	Other Vehicles	11	12-13-2020 09:52 PM
TerribleONE's UPDATED build progress	TerribleONE	Member's 370Z Gallery	175	01-02-2014 10:30 PM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD	Reaper42	Forced Induction	14	01-22-2011 06:24 PM
LOST the Final season: discussion thread	Reaper42	The Lounge (Off Topic)	185	08-07-2010 04:42 PM