>>>>>Puckshaw's Boosted Performance Twin Scroll Single Turbo Build<<<<<

TerribleONE · 01-08-2014, 04:06 PM

Nice!

puckshaw · 01-08-2014, 04:15 PM

Quote:

Originally Posted by Diabel

Is that power fall because of dropping boost? Shouldn't hold still 10 psi to the very end?

Sasha, what is the stock block boost limit for your kit ?

Puckshaw - solid numbers, I'm almost exited as you because one of Sasha's great kits will soon land in my car too

I've seen a couple of the other BP kit dynos and they manage to hold the power to redline even though the boost drops off. Might just be how the tuning is done. Can't wait to see your result. You're going to love it

Quote:

Originally Posted by TerribleONE

Nice!

GaleForce · 01-08-2014, 05:27 PM

Quote:

Originally Posted by Diabel

Is that power fall because of dropping boost? Shouldn't hold still 10 psi to the very end?

Sasha, what is the stock block boost limit for your kit ?

Puckshaw - solid numbers, I'm almost exited as you because one of Sasha's great kits will soon land in my car too

The power fall is not from the drop in boost. My boost dropped on the top end, but I was still making power. I believe the drop on boost is because of the VVEL. Sasha can confirm that.

IMG_2925 by J M Gale, on Flickr

Boosted Performance · 01-08-2014, 06:59 PM

The power tapering off so early with this dyno is strictly due to the way the car is tuned. This is the firs dyno (out of about ten) where the power starts to fall off. VVEL is the reason boost falls off a bit, but as long as power is going up, there is nothing to worry about. This is straight from one of the best tuners out there. I think this tune is simply very conservative in the upper rpm's, and a bit aggressive to start with as the torque is high. Of course each tuner will have a different power/torque curve. It is like a signature, despite the fact that both engine and turbo kit are identical.

jlo370z · 01-08-2014, 08:41 PM

Quote:

Originally Posted by Chuck33079

Might as well. You'll never actually receive a product from Evo-R.

depends on who you bought it from,

Puckshaw im jealous of your build my man...... I so need to order this turbo, soon , soon i hope

puckshaw · 01-08-2014, 09:33 PM

Quote:

Originally Posted by Boosted Performance

The power tapering off so early with this dyno is strictly due to the way the car is tuned. This is the firs dyno (out of about ten) where the power starts to fall off. VVEL is the reason boost falls off a bit, but as long as power is going up, there is nothing to worry about. This is straight from one of the best tuners out there. I think this tune is simply very conservative in the upper rpm's, and a bit aggressive to start with as the torque is high. Of course each tuner will have a different power/torque curve. It is like a signature, despite the fact that both engine and turbo kit are identical.

Yeah I looked at one of the VSR dynos this shop tuned and it's similar in the upper rpms. I think he just dials it back a bit. As for the torque, it is high but comes on smooth which I feel is safe.

On another note, this car goes like a raped ape. I just took a friend for a spin and was giving it the beans on the highway. Accidentally spun 4th gear lol Damn this thing is fun but takes a little finesse to drive fast. I'm getting used to rolling into the throttle and putting the power down better. It's just so cold right now that traction is scarce. I thought I could hammer 4th without worrying about it but nope haha

puckshaw · 01-08-2014, 09:33 PM

Quote:

Originally Posted by jlo370z

depends on who you bought it from,

Puckshaw im jealous of your build my man...... I so need to order this turbo, soon , soon i hope

Thanks my friend. Do it. Do it now.

puckshaw · 01-09-2014, 03:06 PM

The shop sent me the overlay of the turbo vs baseline. Looks like they used a different pull than the one I posted before but you get the idea. Quite a difference from my old setup lol

jwick · 01-09-2014, 04:56 PM

Awesome numbers! Can't wait until one of these threads is my build.

puckshaw · 01-09-2014, 04:58 PM

Quote:

Originally Posted by jwick

Awesome numbers! Can't wait until one of these threads is my build.

Thanks!

Cell · 01-09-2014, 07:42 PM

Good numbers.

Get your money back from GTM yet?

puckshaw · 01-09-2014, 07:43 PM

Quote:

Originally Posted by Cell

Good numbers.

Get your money back from GTM yet?

Thanks

No refund but my bank reimbursed me and is going after GTM.

Boosted Performance · 01-09-2014, 08:04 PM

Quote:

Originally Posted by puckshaw

Thanks

No refund but my bank reimbursed me and is going after GTM.

So much for a "business with a brick and mortar facility with bona fide business hours, phone number, e-mail address and fax number" who "has been in business for 26 years".

It just goes to prove that it doesn't matter what the walls/exterior look like, but it does matter what is inside them.

Glad you got your money back, and hope nobody else goes through the same BS.

puckshaw · 01-09-2014, 08:16 PM

Quote:

Originally Posted by Boosted Performance

So much for a "business with a brick and mortar facility with bona fide business hours, phone number, e-mail address and fax number" who "has been in business for 26 years".

It just goes to prove that it doesn't matter what the walls/exterior look like, but it does matter what is inside them.

Glad you got your money back, and hope nobody else goes through the same BS.

I'm actually really glad that GTM can't get their sh!t together because it led me to your kit. It's honestly the best thing that could have happened for me. It couldn't have worked out any better in the end. Well I guess I could have gotten my refund

Mr&Mrs · 01-10-2014, 10:59 AM

Great numbers!

01-08-2014, 04:06 PM	#211 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	Nice! puckshaw likes this. __________________ 638WHP 541WTQ @ 13.5PSI Build thread

01-08-2014, 06:59 PM	#214 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	The power tapering off so early with this dyno is strictly due to the way the car is tuned. This is the firs dyno (out of about ten) where the power starts to fall off. VVEL is the reason boost falls off a bit, but as long as power is going up, there is nothing to worry about. This is straight from one of the best tuners out there. I think this tune is simply very conservative in the upper rpm's, and a bit aggressive to start with as the torque is high. Of course each tuner will have a different power/torque curve. It is like a signature, despite the fact that both engine and turbo kit are identical. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

01-09-2014, 03:06 PM	#218 (permalink)
puckshaw Track Member Join Date: Nov 2009 Location: Charlotte, NC Posts: 620 Drives: 09 PW 370Z Touring Rep Power: 17	The shop sent me the overlay of the turbo vs baseline. Looks like they used a different pull than the one I posted before but you get the idea. Quite a difference from my old setup lol jwick likes this. __________________ >>>>>BP Build Thread<<<<<

01-09-2014, 04:56 PM	#219 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	Awesome numbers! Can't wait until one of these threads is my build. puckshaw and jlo370z like this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

01-10-2014, 10:59 AM	#225 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31940	Great numbers! __________________ Project Z <--Click - Check out the link too many mods to list!

01-09-2014, 07:42 PM	#221 (permalink)
Cell A True Z Fanatic Join Date: Jan 2010 Location: Chicago Posts: 1,449 Drives: A Garbage Truck Rep Power: 21	Good numbers. Get your money back from GTM yet?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Boosted Performance turbo kit self install (review)	Cell	Forced Induction	87	10-24-2017 10:38 AM
Boosted Performance single turbo build	Boosted Performance	Forced Induction	1841	09-06-2016 12:17 PM
Boosted Performance single turbo results	Boosted Performance	Forced Induction	136	06-18-2014 06:40 PM
Twin scroll vs twin turbo	SS_Firehawk	Forced Induction	32	04-13-2014 01:02 PM
GTM Performance Engineering: Mild 7 A/T Twin Turbo Build	SAM@GTM	Forced Induction	37	12-11-2013 01:23 PM