>>>>>Puckshaw's Boosted Performance Twin Scroll Single Turbo Build<<<<<

elliotty · 12-19-2013, 01:26 PM

I agree, the boost gauges are never 100% accurate. I had a PLX boost sensor on my car when I had my PLX gauge setup. It worked well. My only gripe was that it only showed boost OR vacuum, not both. Maybe they have fixed that by now. If you are planning on running an electronic boost controller, that can serve as a boost gauge as well.

Sent from my iPhone using Tapatalk

puckshaw · 12-19-2013, 01:37 PM

Quote:

Originally Posted by Chuck33079

My boost gauge is off by .2 psi.

There's a lot of guys selling gauges and stuff since they're changing their mind on boost. You might be able to vulture a gauge for cheap.

Yeah not saying they're all off, but they can be. I'll keep an eye out for deals but I like the idea of having it all on screen and not having to mount a gauge somewhere

Quote:

Originally Posted by FireDan50

Post up if you ever figure out the DashCommand settings...would be nice to use that. I'm running Ventus RS-3 305/35/19 on the back and have a hard time keeping good traction when driving hard 1-3 gears in low 60F temps....really have to be sensitive w/ the throttle and pay attention to the boost coming on. I had 295 Michelin PSS just a couple months ago and they weren't any better...having an aftermarket differential helps a little I think.

Will do

Although it would likely need to be tweaked a bit for your setup. Based on your peak torque number (race tune), I'm calculating a VE of 185% for you

Quote:

Originally Posted by elliotty

I agree, the boost gauges are never 100% accurate. I had a PLX boost sensor on my car when I had my PLX gauge setup. It worked well. My only gripe was that it only showed boost OR vacuum, not both. Maybe they have fixed that by now. If you are planning on running an electronic boost controller, that can serve as a boost gauge as well.

Sent from my iPhone using Tapatalk

Glad the boost sensor worked well for you. I'll be running it through Dash Command on AppRadio which has customizable gauges. They show vacuum and boost on the same gauge

puckshaw · 12-19-2013, 02:42 PM

Alex at Motion Lab came through and is going to have a manual boost controller waiting for me when I arrive for the tune tomorrow

FireDan50 · 12-19-2013, 06:28 PM

Quote:

Originally Posted by puckshaw

Alex at Motion Lab came through and is going to have a manual boost controller waiting for me when I arrive for the tune tomorrow

This whole time I never realized you were in NC lol. Motion lab is awesome and tuned my supercharger and turbo setup. If I'm free I might drive up there to check it out.

puckshaw · 12-19-2013, 08:07 PM

Quote:

Originally Posted by FireDan50

This whole time I never realized you were in NC lol. Motion lab is awesome and tuned my supercharger and turbo setup. If I'm free I might drive up there to check it out.

Yeah man swing on by if you have time. I'll be there at 10:30 and I'm guessing the tuning will start around 11:30.

I just went out and played with dash command a little. You can definitely dial in the boost readings by adjusting the VE. I settled on 99% for now. That was showing a peak of 8.1 psi during a pull in 3rd gear. I still wasn't full throttle so I'll probably need to play with it some more but I just wanted to kind of prove that it can be dialed in.

COSMO · 12-19-2013, 09:07 PM

Lets see how much a comedian he is when we meet one day and I guarantee you I will be the only one laughing.

puckshaw · 12-19-2013, 10:31 PM

Easy fella.

Anyways, I figured out that rattle. My h-pipe was knocking against the crossmember. I couldn't get the exhaust adjusted any higher so I used some washers on the crossmember to get some more clearance. Took it for a spin and that solved it

Diabel · 12-20-2013, 08:43 AM

Puckshaw did you think about move up the rev limiter by the tune? I know some guys set it higher (8k RPM) with NA but do not know if it is safe with FI setups.

Chuck33079 · 12-20-2013, 08:46 AM

Quote:

Originally Posted by Diabel

Puckshaw did you think about move up the rev limiter by the tune? I know some guys put it higher (8k RPM) with NA but do not know if it is safe with FI setups.

It's not safe with NA or FI applications. The guys running 8k redlines are asking for trouble. The oil pump will beat itself to death. Its internals are crappy sintered metal and they will come apart at high rpm.

puckshaw · 12-20-2013, 08:50 AM

I've heard the same about the oil pump. I don't see any need to chance it.

Chuck33079 · 12-20-2013, 08:53 AM

Whenever I build a motor, I'll throw in the Nismo oil pump with billet internals and rev the hell out of the thing. Until then, no way.

elliotty · 12-20-2013, 03:16 PM

How did the tune go?

Sent from my iPhone using Tapatalk

BlkNismo · 12-20-2013, 04:24 PM

post the dyno results also if you can.

I keep hearing great things about Motion Lab.

puckshaw · 12-20-2013, 04:46 PM

Getting a late start. Fed Ex was way late on delivering the boost controller. I'll post up when we have some results

puckshaw · 12-20-2013, 11:16 PM

Well we ran into a fueling issue as we crossed into the 500whp range. The shop and Sasha seem to agree that the pump isn't getting enough voltage so a relay will probably need to be installed. I pulled the pump to make sure all the hoses were good just to rule that out and everything appears to be fine. The shop is pretty booked up until after the holidays so I'm not sure if I'll be able to get this straightened out until January.

12-19-2013, 02:42 PM	#153 (permalink)
puckshaw Track Member Join Date: Nov 2009 Location: Charlotte, NC Posts: 620 Drives: 09 PW 370Z Touring Rep Power: 17	Alex at Motion Lab came through and is going to have a manual boost controller waiting for me when I arrive for the tune tomorrow Dzel likes this. __________________ >>>>>BP Build Thread<<<<<

12-19-2013, 10:31 PM	#157 (permalink)
puckshaw Track Member Join Date: Nov 2009 Location: Charlotte, NC Posts: 620 Drives: 09 PW 370Z Touring Rep Power: 17	Easy fella. Anyways, I figured out that rattle. My h-pipe was knocking against the crossmember. I couldn't get the exhaust adjusted any higher so I used some washers on the crossmember to get some more clearance. Took it for a spin and that solved it COSMO likes this. __________________ >>>>>BP Build Thread<<<<<

12-20-2013, 08:50 AM	#160 (permalink)
puckshaw Track Member Join Date: Nov 2009 Location: Charlotte, NC Posts: 620 Drives: 09 PW 370Z Touring Rep Power: 17	I've heard the same about the oil pump. I don't see any need to chance it. Chuck33079 likes this. __________________ >>>>>BP Build Thread<<<<<

12-20-2013, 08:53 AM	#161 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Whenever I build a motor, I'll throw in the Nismo oil pump with billet internals and rev the hell out of the thing. Until then, no way. puckshaw and Dzel like this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

12-20-2013, 04:46 PM	#164 (permalink)
puckshaw Track Member Join Date: Nov 2009 Location: Charlotte, NC Posts: 620 Drives: 09 PW 370Z Touring Rep Power: 17	Getting a late start. Fed Ex was way late on delivering the boost controller. I'll post up when we have some results zguynate, jlo370z and m3chhawk like this. __________________ >>>>>BP Build Thread<<<<<

12-19-2013, 01:26 PM	#151 (permalink)
elliotty Enthusiast Member Join Date: Sep 2010 Location: Charlotte, NC Posts: 355 Drives: '10 PG Nismo TT Rep Power: 15	I agree, the boost gauges are never 100% accurate. I had a PLX boost sensor on my car when I had my PLX gauge setup. It worked well. My only gripe was that it only showed boost OR vacuum, not both. Maybe they have fixed that by now. If you are planning on running an electronic boost controller, that can serve as a boost gauge as well. Sent from my iPhone using Tapatalk

12-19-2013, 09:07 PM	#156 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	Lets see how much a comedian he is when we meet one day and I guarantee you I will be the only one laughing.

12-20-2013, 08:43 AM	#158 (permalink)
Diabel Base Member Join Date: Sep 2012 Location: Bensenville IL Posts: 103 Drives: 370z Rep Power: 13	Puckshaw did you think about move up the rev limiter by the tune? I know some guys set it higher (8k RPM) with NA but do not know if it is safe with FI setups.

12-20-2013, 03:16 PM	#162 (permalink)
elliotty Enthusiast Member Join Date: Sep 2010 Location: Charlotte, NC Posts: 355 Drives: '10 PG Nismo TT Rep Power: 15	How did the tune go? Sent from my iPhone using Tapatalk

12-20-2013, 04:24 PM	#163 (permalink)
BlkNismo Track Member Join Date: Sep 2011 Location: USA Posts: 614 Drives: Nismo Rep Power: 15	post the dyno results also if you can. I keep hearing great things about Motion Lab.

12-20-2013, 11:16 PM	#165 (permalink)
puckshaw Track Member Join Date: Nov 2009 Location: Charlotte, NC Posts: 620 Drives: 09 PW 370Z Touring Rep Power: 17	Well we ran into a fueling issue as we crossed into the 500whp range. The shop and Sasha seem to agree that the pump isn't getting enough voltage so a relay will probably need to be installed. I pulled the pump to make sure all the hoses were good just to rule that out and everything appears to be fine. The shop is pretty booked up until after the holidays so I'm not sure if I'll be able to get this straightened out until January. __________________ >>>>>BP Build Thread<<<<<

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Boosted Performance turbo kit self install (review)	Cell	Forced Induction	87	10-24-2017 10:38 AM
Boosted Performance single turbo build	Boosted Performance	Forced Induction	1841	09-06-2016 12:17 PM
Boosted Performance single turbo results	Boosted Performance	Forced Induction	136	06-18-2014 06:40 PM
Twin scroll vs twin turbo	SS_Firehawk	Forced Induction	32	04-13-2014 01:02 PM
GTM Performance Engineering: Mild 7 A/T Twin Turbo Build	SAM@GTM	Forced Induction	37	12-11-2013 01:23 PM