AE Performance 370Z Project

GMZ · 08-26-2009, 06:24 PM

Blacked out fangs/lights would look killer

DannyGT · 08-26-2009, 06:59 PM

Quote:

Originally Posted by Paul@AEperformance

TE's will always reign suspreme, but some car's not all can run a proper CE set-up, like the Z.

Camber set-up for the street is pretty mild.
We run mostly H&R on all our cars', mainly b/c they come machined with Hub centric rings on them and they are a trick, magneisium alloy. (Had to run the spacer b/c they don't offer wider or more aggressive sizes like u mentioned)

Thanks again for the support.

Ah, very nice! I was contemplating on doing 10mm in the rear...So your saying I can special order the spacers with it hubcentric to my AME wheels? If so, can I order them through you or do you have a link?

Shunya · 08-26-2009, 08:39 PM

CE28N doesn't look bad on the Z at all.
and I thought lots of spokes will look bad but this is changing my mind.

Paul@AEperformance · 08-26-2009, 09:09 PM

Quote:

Originally Posted by DannyGT

Ah, very nice! I was contemplating on doing 10mm in the rear...So your saying I can special order the spacers with it hubcentric to my AME wheels? If so, can I order them through you or do you have a link?

No special order, their spacers just offer attached HC rings. And we stock'em. Check it out:
H&R TRAK+® Wheel Spacers | Products || H&R Special Springs, LP

Let me know if you have any other questions

Thanks Shunya

NAD 007 · 08-27-2009, 10:37 AM

Amazing !!
The car look almost standard at the first see but according to all the modification, this 370Z is definitively better than "Normal" !!

Paul@AEperformance · 08-27-2009, 03:06 PM

Quote:

Originally Posted by NAD 007

Amazing !!
The car look almost standard at the first see but according to all the modification, this 370Z is definitively better than "Normal" !!

Merci Beaucoup!

NAD 007 · 08-27-2009, 04:09 PM

Quote:

Originally Posted by Paul@AEperformance

Merci Beaucoup!

De rien Monsieur

!xoible · 08-27-2009, 04:16 PM

shouldnt you be talking italian, paul?

B1nks · 08-27-2009, 04:41 PM

I was under the impression that spacers were kind of dangerous to run for performance applications. Can't remember why i was told this, maybe something about the studs i believe.

GTRFAN · 08-28-2009, 04:30 AM

Nice setup! The CE28's look the business. Much better looking on a 370 than I expected.

!xoible · 08-28-2009, 07:56 AM

Quote:

Originally Posted by B1nks

I was under the impression that spacers were kind of dangerous to run for performance applications. Can't remember why i was told this, maybe something about the studs i believe.

absolutely make no difference on performance and carry no risk as long as they're good quality, and your lug nuts are good. H&R have pretty good reputation, no worries with spacers at all.

Paul@AEperformance · 08-28-2009, 08:24 PM

^^^

Agreed!

Porsche GT3 and GT2's come with spacers from the factory.

Cup-car's run massive front spacers (~35mm + ) so they can keep the weight close to the center of the hub vs. having the rotor hat make up the space and putting the weight far from the center.

B1nks · 09-05-2009, 11:43 AM

Quote:

Originally Posted by Paul@AEperformance

^^^

Agreed!

Porsche GT3 and GT2's come with spacers from the factory.

Cup-car's run massive front spacers (~35mm + ) so they can keep the weight close to the center of the hub vs. having the rotor hat make up the space and putting the weight far from the center.

Sweet deal. Was rolling the front fenders any different with the 370 as compared to the 350 ? Dyno yet with the Mines ECU ? You said you're running stock tire sizes all around, is that because bigger wont fit ? Are the rears stretched like the fronts ? If the rears are stretched is it needed before the spacer or can larger tires be fit no problem either way ?

FuszNissan · 09-05-2009, 11:57 AM

The fenders on the 370 are rolled from the factory.

B1nks · 09-05-2009, 12:40 PM

Quote:

Originally Posted by FuszNissan

The fenders on the 370 are rolled from the factory.

only the rears.

08-26-2009, 06:24 PM	#31 (permalink)
GMZ Enthusiast Member Join Date: Jun 2009 Location: Virginia Beach Posts: 304 Drives: 07 V8 4Runner 4x4 Rep Power: 16	Blacked out fangs/lights would look killer __________________ Z-less once again

08-27-2009, 04:16 PM	#38 (permalink)
!xoible Base Member Join Date: Feb 2009 Location: west Posts: 245 Drives: some car Rep Power: 185	shouldnt you be talking italian, paul? __________________ welcome to the internet. now ur out of ur ***** mind if you get offended at this ** ^^^

08-28-2009, 08:24 PM	#42 (permalink)
Paul@AEperformance The370Z.com Sponsor Join Date: Aug 2009 Location: At the Track Posts: 194 Drives: All sorts of Fast! Rep Power: 16	^^^ Agreed! Porsche GT3 and GT2's come with spacers from the factory. Cup-car's run massive front spacers (~35mm + ) so they can keep the weight close to the center of the hub vs. having the rotor hat make up the space and putting the weight far from the center. __________________ http://i10.photobucket.com/albums/a1...Ejdmbanner.gif Last edited by Paul@AEperformance; 08-28-2009 at 08:31 PM.

09-05-2009, 11:57 AM	#44 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 542	The fenders on the 370 are rolled from the factory. __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Forged Performance: Project 370Z Race Car Build!!	Sharif@Forged	Engine & Drivetrain	502	12-30-2012 06:09 PM
DDM Project 370Z	M.Bonanni	Member's 370Z Gallery	617	01-07-2010 07:50 PM
THE BUILD! Project 370Z	VIP-STATUS	Nissan 370Z Photos / Spyshots / Video / Media Gallery	34	09-04-2009 02:25 AM
looking for 370z for carbon fiber project	370z_hot	North East Region	2	05-27-2009 01:57 PM

08-26-2009, 08:39 PM	#33 (permalink)
Shunya A True Z Fanatic Join Date: May 2009 Location: Vancouver Posts: 3,069 Drives: You Crazy! Rep Power: 22	CE28N doesn't look bad on the Z at all. and I thought lots of spokes will look bad but this is changing my mind.

08-27-2009, 10:37 AM	#35 (permalink)
NAD 007 Base Member Join Date: Aug 2009 Location: France Posts: 13 Drives: Nissan 370Z White - Rep Power: 16	Amazing !! The car look almost standard at the first see but according to all the modification, this 370Z is definitively better than "Normal" !!

08-27-2009, 04:41 PM	#39 (permalink)
B1nks Track Member Join Date: Apr 2009 Location: Houston,Tx Posts: 721 Drives: 2009 370Z Base 6MT Rep Power: 507	I was under the impression that spacers were kind of dangerous to run for performance applications. Can't remember why i was told this, maybe something about the studs i believe.

08-28-2009, 04:30 AM	#40 (permalink)
GTRFAN Track Member Join Date: Dec 2008 Location: Melbourne Posts: 586 Drives: 370z Titanium 6MT Rep Power: 18	Nice setup! The CE28's look the business. Much better looking on a 370 than I expected.

**AE Performance 370Z Project**

AE Performance 370Z Project