Hung out with my best friend, Dremel, today. We did some stuff.

https://farm2.staticflickr.com/1585/...a86dc57a_b.jpg1459262247553 by datsunpride, on Flickr

https://farm2.staticflickr.com/1493/...3a0e9a97_b.jpg1459260585337 by datsunpride, on Flickr

https://farm2.staticflickr.com/1514/...3afd19e5_b.jpg20160329_110650 by datsunpride, on Flickr

https://farm2.staticflickr.com/1644/...594be7a2_b.jpg20160329_124539 by datsunpride, on Flickr

https://farm2.staticflickr.com/1575/...914d8bcd_b.jpg20160329_124545 by datsunpride, on Flickr

https://farm2.staticflickr.com/1603/...85322ac2_b.jpg20160329_143630 by datsunpride, on Flickr

https://farm2.staticflickr.com/1571/...a172d8f9_b.jpg20160329_143549 by datsunpride, on Flickr

Went for a test drive and beat on the brakes. After parking the car I could still feel the heat rising from the vents. This will definitely help relieve some wheel well pressure since I don't have any wheel liners after the Raccoon incident.

Next up: The Hood!

One of my favorite cars on here. Very nice man. :tup:

Thank you!

Viper acr inspired? ?!

Sent from my SM-N920V using Tapatalk

Inspired by a whole lot of GT3 cars. I just needed its function.

Looking good, haven't seen anyone do that yet, way to see a problem and solve it.


Sent from my iPhone using Tapatalk

Do you have any planm on building a front race style splitter?

My final other plans as far as aero and venting are a full splitter with canards built into it, cut the bumper to have air passage into a dual oil cooler set up I plan to run on the sides of the radiator, a center hood vent, and possibly longer vents up the side of the hood. Vents being TrackSpec universal ones. They have been tested quite rigorously so those are a definite

Sent from my LG-H900 using Tapatalk

Brave move Thomas. Hope you don't mind.

What a transformation! :tup:

2013

[IMG]https://farm4.staticflickr.com/3680/...6b6d3f00_c.jpg20130828_162549_Richtone(HDR) by datsunpride, on Flickr[/IMG]

[IMG]https://farm8.staticflickr.com/7334/...f6d94756_c.jpgi5pufvea1 by datsunpride, on Flickr[/IMG]

2014

[IMG]https://farm4.staticflickr.com/3820/...509c132a_c.jpg21 by datsunpride, on Flickr[/IMG]

2015

[IMG]https://farm8.staticflickr.com/7633/...6456e7e2_c.jpgIMG_2518-2 by datsunpride, on Flickr[/IMG]

2016

[IMG]https://farm2.staticflickr.com/1603/...85322ac2_c.jpg20160329_143630 by datsunpride, on Flickr[/IMG]

Awesome work Thomas! definitely one of my favorites builds by far man! :tup:

Outstanding work on the front fenders Mr Thomas :tup:

The front fenders have the IMSA in your face and track ready look :eek:


-Clifford :tiphat:

You guys are too much. Thank you! I really appreciate the kind words.

Sent from my LG-H900 using Tapatalk

Datsun, did you have 350z nismo wheels on your car or is that PS? If you did where can I see more pictures of the car with those wheels!? :)
Thanks

It was a Photoshop. I liked those wheels a lot on my 350 so I wanted to buy them at the time.

Sent from my LG-H900 using Tapatalk