The Life and Times of Riptide67's 370Z

DatsunFTW · 02-20-2014, 12:58 PM

I like!

Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

Riptide67 · 02-20-2014, 11:45 PM

This weekend is gonna be fun, my friend and I have quite a bit to install:
FI LTHs
Stillen Sways
Kenwood DNN9990HD
ZenClosure
JL10wv3
JL 500/1

It's gonna be a doozy!

Riptide67 · 02-21-2014, 01:48 AM

Today a friend informed me that the retrofit source was having a close out on the XbaLed halos. I decided to get a set of the amber color in 70mm. I needed an excuse to open my headlights up again

Gonna mod the turn signal projector shroud and go with dual halos and either paint the shrouds or have them wrapped in CF vinyl. I will probably end up painting them

Riptide67 · 02-23-2014, 06:28 PM

What a long weekend. My buddy Danny and I put in some major hours on Saturday. We kicked off at 7am and ended the day 22 hours later at 5am. We ran into some bumps in the road during the breakdown and install.

Day 2 started at 10am and ended just before 1pm.

Completed:
Sub, amp, and wiring removal for Danny's car
M7 coilovers(fronts) for Danny's car

FI LTH on mine
Stillen front and rear sways on mine
Sub, amp, headunit, and wiring install on mine.

I have a damaged upstream o2 sensor which I am pretty sure is causing the SES light to flash.

The steering column had to be disconnected for the drivers side header to be installed. The steering wheel is slightly off and is cocked to the left at about 10pm. Any easy fix, but it can wait.

The one that has me a bit confused in my VDC light is illuminated along with the anti-slip light. I have a theory that it may be due to removing the Bose sub and spare tire bc of the TPMS inside. Gonna reinstall it tomorrow.

Mr&Mrs · 02-23-2014, 07:29 PM

If you need any help with the fender install let me know. I have a DIY for a different version but the install is the same. I would also recommend having that CF UV protected and cleared if it isn't already.

Riptide67 · 02-23-2014, 07:45 PM

Appreciate it! I would love to look at the DIY you have. The clear coat looks very good but I may have it sprayed again. After all the CF panels go on, they are being covered with a 3M clear bra to protect from normal wear and tear

Riptide67 · 02-24-2014, 03:18 PM

Good news to report.

I pulled the negative battery terminal connection this morning and let the ECU reset itself to see if it would clear the SES light. After reconnection and the short 2 mile drive to work, it did not return again. This is good bc the o2 sensor may not be damaged and the ECU may have just had to learn the change from the ART pipes to FI LTH. I will make another log after the drive home from work.

Still showing the constant on lights for the VDC OFF and Anti slip indicators.

Mr&Mrs · 02-24-2014, 03:38 PM

I could be mistaken but I thought I read stero installs can wack out some dash lights. Maybe nose around in audio section for reset procedures. Like I said I'm not totally sure clouded memory.

Riptide67 · 02-24-2014, 04:37 PM

I also remember seeing something about the car needing to be drove at 55mph to reset the sensors or something. I am not sure if the removal of the steering column had anything to do with it during the LTH install. Just gotta do a bit of research and figure it out.

Riptide67 · 02-24-2014, 11:46 PM

Managed to snap some pics during the big install. Still need to take a few of the zenclosure, headunit, and shift knob.

G3's and strut bar removed to gain access to the oem headers:

Passenger seat removed to run wiring and hide the JL amplifier:

Trunk gutted of the spare tire and Bose subwoofer:

FI LTH mounted and ready for o2 sensor:

Stillen Front sway bar installed:

Stillen Rear sway bar installed:

Riptide67 · 02-25-2014, 08:01 PM

First cold start video:
Fast Intentions LTH and Exhaust, First Cold Start - YouTube

Muffler removed video...giggidy:
Fast Intentions LTH and exhaust, no muffler - YouTube

Riptide67 · 02-27-2014, 12:29 AM

SES has not returned, since the ECU was reset.

I tried adjusting the steering column to no success. Probably bc I have never done it before haha. I made an appt. for Friday morning to have it correctly aligned. Base garage charges $73 an hour and they assured me it shouldn't take more than one hour, so no big deal.

Gonna try reinstalling my OEM spare and see if that makes he vdc and anti slip lights shut off. Could also be caused by the steering wheel being slightly off...????? Not entirely sure.

If neither of those does the trick, maybe the long drive Saturday will reset the lights.

Riptide67 · 03-01-2014, 11:35 PM

After around 5 hours of driving today, I decided to write a little review on the parts I just installed.

Stillen sway bars: wow! Took the car through some twisted today between 35-55 mph. Car was so firm and planted. Body roll is significantly reduced with both front and rear set to medium stiffness. I adjusted my BC coils to 17 all the way around and the combo of the two makes for a very responsive and fun ride. I enjoyed the twisties and always felt the car. I didn't have the vdc on and the car stay planted and smooth throughout the slightly aggressive throttle.

FI LTH: the sound is bananas and the low end response is great. But today I had the car driving most between 35 and 75 mph. Mid-range is awesome and high end is great! I did want spirited drop from 6th to 5th at 65mph and took her up into the triple digits with ease. The drone is significantly less compared to my recent ART pipes. The car screams when you give it the throttle and when you are easy on it, they are barely noticeable. Smell is significantly better than the ART pipes as well. No CEL light at all and I received several compliments at a car meet/show and from this hot barista at a roadside coffee stand served by girls in bikinis.

Kenwood DNX9990HD: runs flawlessly and the Garmin Navi works wonderfully. Super fast unit and teamed with the JL audio makes for a big upgrade over the Bose system. I would like to eventually remove the rest of the Bose components and swap them out. Just not sure with what yet or when I'll get to it.

RICAN · 03-02-2014, 01:48 AM

when are you planing to retuned the car?

Riptide67 · 03-02-2014, 03:40 AM

Retune will happen sometime next month

Gotta secure a time to get on the dyno at Intec.

02-20-2014, 12:58 PM	#166 (permalink)
DatsunFTW A True Z Fanatic Join Date: Apr 2013 Location: Gainesville, FL Posts: 1,234 Drives: 12 370z A54 M6 Rep Power: 379	I like! Sent from my SAMSUNG-SGH-I337 using Tapatalk 2 __________________ The Build

02-20-2014, 11:45 PM	#167 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 37 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 69	This weekend is gonna be fun, my friend and I have quite a bit to install: FI LTHs Stillen Sways Kenwood DNN9990HD ZenClosure JL10wv3 JL 500/1 It's gonna be a doozy! Luciano13 likes this. __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

02-21-2014, 01:48 AM	#168 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 37 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 69	Today a friend informed me that the retrofit source was having a close out on the XbaLed halos. I decided to get a set of the amber color in 70mm. I needed an excuse to open my headlights up again Gonna mod the turn signal projector shroud and go with dual halos and either paint the shrouds or have them wrapped in CF vinyl. I will probably end up painting them __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

02-23-2014, 06:28 PM	#169 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 37 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 69	What a long weekend. My buddy Danny and I put in some major hours on Saturday. We kicked off at 7am and ended the day 22 hours later at 5am. We ran into some bumps in the road during the breakdown and install. Day 2 started at 10am and ended just before 1pm. Completed: Sub, amp, and wiring removal for Danny's car M7 coilovers(fronts) for Danny's car FI LTH on mine Stillen front and rear sways on mine Sub, amp, headunit, and wiring install on mine. I have a damaged upstream o2 sensor which I am pretty sure is causing the SES light to flash. The steering column had to be disconnected for the drivers side header to be installed. The steering wheel is slightly off and is cocked to the left at about 10pm. Any easy fix, but it can wait. The one that has me a bit confused in my VDC light is illuminated along with the anti-slip light. I have a theory that it may be due to removing the Bose sub and spare tire bc of the TPMS inside. Gonna reinstall it tomorrow. __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

02-23-2014, 07:29 PM	#170 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31940	If you need any help with the fender install let me know. I have a DIY for a different version but the install is the same. I would also recommend having that CF UV protected and cleared if it isn't already. Riptide67 likes this. __________________ Project Z <--Click - Check out the link too many mods to list!

02-23-2014, 07:45 PM	#171 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 37 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 69	Appreciate it! I would love to look at the DIY you have. The clear coat looks very good but I may have it sprayed again. After all the CF panels go on, they are being covered with a 3M clear bra to protect from normal wear and tear Mr&Mrs likes this. __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

02-24-2014, 03:18 PM	#172 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 37 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 69	Good news to report. I pulled the negative battery terminal connection this morning and let the ECU reset itself to see if it would clear the SES light. After reconnection and the short 2 mile drive to work, it did not return again. This is good bc the o2 sensor may not be damaged and the ECU may have just had to learn the change from the ART pipes to FI LTH. I will make another log after the drive home from work. Still showing the constant on lights for the VDC OFF and Anti slip indicators. Mr&Mrs likes this. __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

02-24-2014, 03:38 PM	#173 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31940	I could be mistaken but I thought I read stero installs can wack out some dash lights. Maybe nose around in audio section for reset procedures. Like I said I'm not totally sure clouded memory. Riptide67 likes this. __________________ Project Z <--Click - Check out the link too many mods to list!

02-24-2014, 04:37 PM	#174 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 37 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 69	I also remember seeing something about the car needing to be drove at 55mph to reset the sensors or something. I am not sure if the removal of the steering column had anything to do with it during the LTH install. Just gotta do a bit of research and figure it out. __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

02-24-2014, 11:46 PM	#175 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 37 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 69	Managed to snap some pics during the big install. Still need to take a few of the zenclosure, headunit, and shift knob. G3's and strut bar removed to gain access to the oem headers: Passenger seat removed to run wiring and hide the JL amplifier: Trunk gutted of the spare tire and Bose subwoofer: FI LTH mounted and ready for o2 sensor: Stillen Front sway bar installed: Stillen Rear sway bar installed: Mr&Mrs and zefaulter like this. __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

02-25-2014, 08:01 PM	#176 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 37 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 69	First cold start video: Fast Intentions LTH and Exhaust, First Cold Start - YouTube Muffler removed video...giggidy: Fast Intentions LTH and exhaust, no muffler - YouTube Mr&Mrs, Hotrodz and DatsunFTW like this. __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

02-27-2014, 12:29 AM	#177 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 37 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 69	SES has not returned, since the ECU was reset. I tried adjusting the steering column to no success. Probably bc I have never done it before haha. I made an appt. for Friday morning to have it correctly aligned. Base garage charges $73 an hour and they assured me it shouldn't take more than one hour, so no big deal. Gonna try reinstalling my OEM spare and see if that makes he vdc and anti slip lights shut off. Could also be caused by the steering wheel being slightly off...????? Not entirely sure. If neither of those does the trick, maybe the long drive Saturday will reset the lights. __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

03-01-2014, 11:35 PM	#178 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 37 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 69	After around 5 hours of driving today, I decided to write a little review on the parts I just installed. Stillen sway bars: wow! Took the car through some twisted today between 35-55 mph. Car was so firm and planted. Body roll is significantly reduced with both front and rear set to medium stiffness. I adjusted my BC coils to 17 all the way around and the combo of the two makes for a very responsive and fun ride. I enjoyed the twisties and always felt the car. I didn't have the vdc on and the car stay planted and smooth throughout the slightly aggressive throttle. FI LTH: the sound is bananas and the low end response is great. But today I had the car driving most between 35 and 75 mph. Mid-range is awesome and high end is great! I did want spirited drop from 6th to 5th at 65mph and took her up into the triple digits with ease. The drone is significantly less compared to my recent ART pipes. The car screams when you give it the throttle and when you are easy on it, they are barely noticeable. Smell is significantly better than the ART pipes as well. No CEL light at all and I received several compliments at a car meet/show and from this hot barista at a roadside coffee stand served by girls in bikinis. Kenwood DNX9990HD: runs flawlessly and the Garmin Navi works wonderfully. Super fast unit and teamed with the JL audio makes for a big upgrade over the Bose system. I would like to eventually remove the rest of the Bose components and swap them out. Just not sure with what yet or when I'll get to it. SterlingDrive likes this. __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four Last edited by Riptide67; 03-01-2014 at 11:38 PM.

03-02-2014, 01:48 AM	#179 (permalink)
RICAN Enthusiast Member Join Date: Jan 2013 Location: fort hood, tx Posts: 345 Drives: 2012 370z m6 Rep Power: 12	when are you planing to retuned the car? Riptide67 likes this.

03-02-2014, 03:40 AM	#180 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 37 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 69	Retune will happen sometime next month Gotta secure a time to get on the dyno at Intec. __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The life and times of a silver Z	3.7 ZPA	Member's 370Z Gallery	12	10-05-2017 08:47 PM
The Life and Times of My 300ZX Turbo	/Angelo350Z/	Other Vehicles	26	08-18-2014 10:47 AM
serious 370z safety, rolled multiple times....	JrumMusic	Nissan 370Z General Discussions	47	07-27-2011 11:19 AM
370Z lap times faster than M3/Cayman. Behind Porsche 9s.	zmyride	Nissan 370Z General Discussions	22	02-11-2011 02:09 PM
LA Times: Hook'n up with the 370Z	cstr_Cali	Nissan 370Z Photos / Spyshots / Video / Media Gallery	5	12-02-2008 12:56 PM