Dan's VSR top-mount turbo 370 v3.0

1cleanZ · 12-27-2016, 12:21 PM

Quote:

Originally Posted by FireDan50

Just realized I never put pics up of the wheels on the car :P
I put a coat of CQuartz ceramic quartz on the wheels after prepping while they were still new.

Have any more angles/photos of the fitment?

Lookin' good man!

18x10 +30 275/40/18
and
18x11 +18 305/35/18

NextLevel · 06-19-2017, 01:54 PM

Quote:

Originally Posted by FireDan50

I haven't posted up here in a while....I've been unemployed for over a year now; using my GI Bill to go back to school and about to finish up a Nuclear Med Tech program this summer. Still have the bug to mod though so fancied up the tires. Everything is still going strong on the car though.

I was running the Nitto drag radials as daily for a while and they finally got too bald so just got a pair of their new NT 555 Gen 2 tires to replace 'em. Unfortunately the widest size they had was 275 so I'm running 275 square now, but I'm cool with it because "student status" and just street driving now.

So are these 275/40's all around? Looks fantastic

FireDan50 · 05-13-2018, 10:35 PM

Welp...coming up on near 5yrs boosted now on stock internals running 10psi daily. *knock on wood* Still rolling on yes, these are 275/40/18s...sorry took me several months to reply. I've been outta the "scene" for a while from moving to another state, starting a new job, and stuff. Just starting to get into cars again and went to a couple meets/events this weekend.

Rusty · 05-13-2018, 11:05 PM

Welcome back.

The Z is still running strong.

By the way. Who is that?

FireDan50 · 02-18-2019, 09:40 AM

Well almost a year later and finally doing some things. It was about time to change brake pads so figured might as well do the lines as well....and the brake fluid, trans fluid, and diff fluid. I'll post more pics later but ended up going with Z1's Premium stainless brake lines, StopTech Street pads, Motul 5.1 brake fluid, Redline MT-85 trans fluid, and Redline 75w90 diff fluid.

While working on the brakes, one of the hard lines actually cracked and had to be replaced. It broke at the passenger front side at the angle where it passes through the metal fender well. I guess all the heat from the downpipe and the vibration at that point weakened it enough to where it broke while I was installing the steel lines. Didn't discover it till I was bleeding the brakes. I'm just glad it happened while on the jack stands and not while driving.

So we replaced the entire line and actually did a small reroute to take it further away from the downpipe and alleviate some stress. The line did well though, having lasted for over almost 6 years boosted. While we were at it I also said bye bye to the heat wrap and went for a full high temp ceramic coating to the downpipe and some other hot turbo pipes.

Chuck33079 · 02-18-2019, 09:56 AM

Wrap the coated piping. I just did the coating on the downpipes and all of my connectors and wiring started getting cooked. Now I've got the heat wrap over the coating and everything's a lot happier.

FireDan50 · 02-18-2019, 01:09 PM

Quote:

Originally Posted by Chuck33079

Wrap the coated piping. I just did the coating on the downpipes and all of my connectors and wiring started getting cooked. Now I've got the heat wrap over the coating and everything's a lot happier.

What type/ brand of coating did you use? Also which wrap?

Chuck33079 · 02-18-2019, 01:15 PM

Not sure on the brand of coating, but the wrap is just the same old Thermotec.

FireDan50 · 02-18-2019, 04:40 PM

I had my pipes done with Cerakote high temp coating (Glacier Black C-7600) which is supposed to be the ****. However...I figure couldn't hurt to wrap it again lol. I need all the heat control I can get with this set up. As you can see in the pics, the space is tight, but its been working (knock on wood). I used DEI Titanium exhaust wrap for the downpipe.

While doing this project I found a sweet light at Lowe's for about $60. Pretty damn right and multiple angles, tripod mountable, USB and outlet connection.

Also OCD kicked in so I hit the Greddy cans with some Blue Magic. Got the carbon off the tips good.
Top is before - bottom after

FireDan50 · 04-12-2019, 11:30 AM

Did the first actual "mod" to my Z in years yesterday. Greddy "Boost Brigade" wheel with quick tilt hub. I'm surprised at how different it feels ti drive with an aftermarket wheel, feels great and the tilt feature makes it easier to get in and out with the fixed back Status seats. Install was super easy and took about 30 min.

FireDan50 · 07-28-2019, 06:35 PM

Latest project was installing the Trackspec Motorsports 3 hood vent kit.
Link to post in the "exterior section"

GalaxZ. · 11-28-2019, 03:58 AM

Been following your post for a bit ever since I picked up a Z in august that’s running the same kit. Old turbo blanket got coated in oil when the turbo line leaked on the old owner. Any recommendations for what brand to run? Black friday coming up!

Boost controller is next up, as well as finding a thermostatic sandwich adapter that has enough ports for my new setrab oil cooler and the turbo feed line

madwi · 11-28-2019, 11:16 PM

Quote:

Originally Posted by GalaxZ.

Old turbo blanket got coated in oil when the turbo line leaked on the old owner. Any recommendations for what brand to run? Black friday coming up!

DEi makes a solid turbo blanket.

FireDan50 · 03-05-2020, 07:58 PM

Haven't updated this in a while because I haven't really been doing anything. Just been trying to maintain the car and keep it running no problems...just realized a lot of the pic links to some posts are now broken; not sure what happened to the pics.

So while trying to just maintain my Z I was having some intermittent oil pressure warning lights coming on so I went to change out the oil pressure sending unit which was only like $20. So yeah that went out the window and ended up costing over a grand to fix in labor and parts. While putting the new sensor in the upper oil pan, I over-torqued it and ended up cracking the pan. Wasn't a super bad crack like others I've seen while googling the problem but it was bad. Tried to plug/weld but that didn't fix it. Ended up just ordering a new upper oil pan.

Luckily my neighbor has a shop that does good work and he replaced it for me. Figured I might as well change out the motor mounts and tranny mount while work was being done.

OMG this thing feels like a track car now but I love it. The solid motor mounts are a HUGE difference not only in NVH but the response/driving feels great. So I have solid motor mounts from CJM, urethane trans mount from Torque Solutions and urethane diff bushings from Z1 now. This isn't my daily driver so the added noise/vibrations don't bother me and I kinda like the extra noise and definitely love the change in driving feel. Hard to describe but solid motor mounts aren't for the timid lol.

FireDan50 · 03-05-2020, 08:03 PM

So I think I messed something up with where I had a lot of my pics stored/linked....going to have to go through this weekend and restore all the pics with broken links.

05-13-2018, 10:35 PM	#138 (permalink)
FireDan50 Track Member Join Date: Mar 2012 Location: San Antonio Posts: 714 Drives: '09 370Z PW M6 Rep Power: 19	Welp...coming up on near 5yrs boosted now on stock internals running 10psi daily. knock on wood Still rolling on yes, these are 275/40/18s...sorry took me several months to reply. I've been outta the "scene" for a while from moving to another state, starting a new job, and stuff. Just starting to get into cars again and went to a couple meets/events this weekend. gbrettin, GaleForce, ZontheRocks and 2 others like this. __________________ VSR Single-turbo kit: 611hp/517tq @ 10psi (Q16 race gas) Dan's VSR top-mount turbo 370z

05-13-2018, 11:05 PM	#139 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,186 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Welcome back. The Z is still running strong. By the way. Who is that? EZT likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

02-18-2019, 09:40 AM	#140 (permalink)
FireDan50 Track Member Join Date: Mar 2012 Location: San Antonio Posts: 714 Drives: '09 370Z PW M6 Rep Power: 19	Well almost a year later and finally doing some things. It was about time to change brake pads so figured might as well do the lines as well....and the brake fluid, trans fluid, and diff fluid. I'll post more pics later but ended up going with Z1's Premium stainless brake lines, StopTech Street pads, Motul 5.1 brake fluid, Redline MT-85 trans fluid, and Redline 75w90 diff fluid. While working on the brakes, one of the hard lines actually cracked and had to be replaced. It broke at the passenger front side at the angle where it passes through the metal fender well. I guess all the heat from the downpipe and the vibration at that point weakened it enough to where it broke while I was installing the steel lines. Didn't discover it till I was bleeding the brakes. I'm just glad it happened while on the jack stands and not while driving. So we replaced the entire line and actually did a small reroute to take it further away from the downpipe and alleviate some stress. The line did well though, having lasted for over almost 6 years boosted. While we were at it I also said bye bye to the heat wrap and went for a full high temp ceramic coating to the downpipe and some other hot turbo pipes. Rusty, Hotrodz, ZontheRocks and 1 others like this. __________________ VSR Single-turbo kit: 611hp/517tq @ 10psi (Q16 race gas) Dan's VSR top-mount turbo 370z

02-18-2019, 09:56 AM	#141 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Wrap the coated piping. I just did the coating on the downpipes and all of my connectors and wiring started getting cooked. Now I've got the heat wrap over the coating and everything's a lot happier. Jayhovah and wideglideleon like this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

02-18-2019, 01:15 PM	#143 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Not sure on the brand of coating, but the wrap is just the same old Thermotec. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

02-18-2019, 04:40 PM	#144 (permalink)
FireDan50 Track Member Join Date: Mar 2012 Location: San Antonio Posts: 714 Drives: '09 370Z PW M6 Rep Power: 19	I had my pipes done with Cerakote high temp coating (Glacier Black C-7600) which is supposed to be the ***. However...I figure couldn't hurt to wrap it again lol. I need all the heat control I can get with this set up. As you can see in the pics, the space is tight, but its been working (knock on wood). I used DEI Titanium exhaust wrap for the downpipe. While doing this project I found a sweet light at Lowe's for about $60. Pretty damn right and multiple angles, tripod mountable, USB and outlet connection. Also OCD kicked in so I hit the Greddy cans with some Blue Magic. Got the carbon off the tips good. Top is before - bottom after Rusty, Hotrodz and ZontheRocks like this. __________________ VSR Single-turbo kit: 611hp/517tq @ 10psi (Q16 race gas) Dan's VSR top-mount turbo 370z Last edited by FireDan50; 02-18-2019 at 05:47 PM.*

04-12-2019, 11:30 AM	#145 (permalink)
FireDan50 Track Member Join Date: Mar 2012 Location: San Antonio Posts: 714 Drives: '09 370Z PW M6 Rep Power: 19	Did the first actual "mod" to my Z in years yesterday. Greddy "Boost Brigade" wheel with quick tilt hub. I'm surprised at how different it feels ti drive with an aftermarket wheel, feels great and the tilt feature makes it easier to get in and out with the fixed back Status seats. Install was super easy and took about 30 min. Hotrodz and Asus_ like this. __________________ VSR Single-turbo kit: 611hp/517tq @ 10psi (Q16 race gas) Dan's VSR top-mount turbo 370z

07-28-2019, 06:35 PM	#146 (permalink)
FireDan50 Track Member Join Date: Mar 2012 Location: San Antonio Posts: 714 Drives: '09 370Z PW M6 Rep Power: 19	Latest project was installing the Trackspec Motorsports 3 hood vent kit. Link to post in the "exterior section" gbrettin, Rusty, Hotrodz and 2 others like this. __________________ VSR Single-turbo kit: 611hp/517tq @ 10psi (Q16 race gas) Dan's VSR top-mount turbo 370z

11-28-2019, 03:58 AM	#147 (permalink)
GalaxZ. Base Member Join Date: Jan 2017 Location: Fayetteville, AR Posts: 19 Drives: ‘09 VSR Big Single Rep Power: 8	Been following your post for a bit ever since I picked up a Z in august that’s running the same kit. Old turbo blanket got coated in oil when the turbo line leaked on the old owner. Any recommendations for what brand to run? Black friday coming up! Boost controller is next up, as well as finding a thermostatic sandwich adapter that has enough ports for my new setrab oil cooler and the turbo feed line

03-05-2020, 07:58 PM	#149 (permalink)
FireDan50 Track Member Join Date: Mar 2012 Location: San Antonio Posts: 714 Drives: '09 370Z PW M6 Rep Power: 19	Haven't updated this in a while because I haven't really been doing anything. Just been trying to maintain the car and keep it running no problems...just realized a lot of the pic links to some posts are now broken; not sure what happened to the pics. So while trying to just maintain my Z I was having some intermittent oil pressure warning lights coming on so I went to change out the oil pressure sending unit which was only like $20. So yeah that went out the window and ended up costing over a grand to fix in labor and parts. While putting the new sensor in the upper oil pan, I over-torqued it and ended up cracking the pan. Wasn't a super bad crack like others I've seen while googling the problem but it was bad. Tried to plug/weld but that didn't fix it. Ended up just ordering a new upper oil pan. Luckily my neighbor has a shop that does good work and he replaced it for me. Figured I might as well change out the motor mounts and tranny mount while work was being done. OMG this thing feels like a track car now but I love it. The solid motor mounts are a HUGE difference not only in NVH but the response/driving feels great. So I have solid motor mounts from CJM, urethane trans mount from Torque Solutions and urethane diff bushings from Z1 now. This isn't my daily driver so the added noise/vibrations don't bother me and I kinda like the extra noise and definitely love the change in driving feel. Hard to describe but solid motor mounts aren't for the timid lol. gbrettin, Rusty, Hotrodz and 5 others like this. __________________ VSR Single-turbo kit: 611hp/517tq @ 10psi (Q16 race gas) Dan's VSR top-mount turbo 370z Last edited by FireDan50; 03-05-2020 at 08:03 PM. Reason: edited photo links

03-05-2020, 08:03 PM	#150 (permalink)
FireDan50 Track Member Join Date: Mar 2012 Location: San Antonio Posts: 714 Drives: '09 370Z PW M6 Rep Power: 19	So I think I messed something up with where I had a lot of my pics stored/linked....going to have to go through this weekend and restore all the pics with broken links. GalaxZ. likes this. __________________ VSR Single-turbo kit: 611hp/517tq @ 10psi (Q16 race gas) Dan's VSR top-mount turbo 370z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
First top mount single turbo 370Z	98intrigue	Forced Induction	1279	02-14-2017 09:51 AM
1ST 7AT TOP MOUNT TURBO BUILD.. By S&R Performance	valpozguy	Forced Induction	83	04-27-2014 11:02 PM
Going FI with VSR Motorsports top mount single turbo	regulator11	Forced Induction	32	05-20-2013 09:04 AM
Sts rear mount turbo	Ni55anPat	Wanted	3	12-22-2012 07:15 PM
First STS rear mount turbo 370Z???	atx370z	Nissan 370Z General Discussions	24	10-14-2010 03:53 PM