Project Carlisle Blue Datsun

Huck · 08-16-2013, 08:06 AM

The GTM kit would be my recommendation for you. I've never heard anybody say they love their stillen SC, they always give people trouble. The design wasn't really that great. One of the problems is that the Mafs are in the wrong spot where they get a lot of turbulence and start going on the fritz. My buddy has one and for a while his car would surge forward, then go I to limp mode for 2-3 seconds, the surge again and back into limp mode. He had to build a custom aluminum airfoil to redirect the air away from the Mafs. Then he had to replace some of the cogs cause they just sucked. All that for not much power? GTM is rock solid performance guaranteed. I'd say she'll out the extra dough if you have it and get the good stuff. If you want more info on the stillen kit, message Osiris here on the forum and he can answer your questions.

I survived Zdayz 2013... (barely)

Z_bro · 08-16-2013, 08:21 AM

Quote:

Originally Posted by Huck

The GTM kit would be my recommendation for you. I've never heard anybody say they love their stillen SC, they always give people trouble. The design wasn't really that great. One of the problems is that the Mafs are in the wrong spot where they get a lot of turbulence and start going on the fritz. My buddy has one and for a while his car would surge forward, then go I to limp mode for 2-3 seconds, the surge again and back into limp mode. He had to build a custom aluminum airfoil to redirect the air away from the Mafs. Then he had to replace some of the cogs cause they just sucked. All that for not much power? GTM is rock solid performance guaranteed. I'd say she'll out the extra dough if you have it and get the good stuff. If you want more info on the stillen kit, message Osiris here on the forum and he can answer your questions.

I survived Zdayz 2013... (barely)

I agree Huck that is why I asked for the GTM quote I just hear its not carb approved so I have to find out that means is far as getting my car through emissions.

Huck · 08-16-2013, 09:10 AM

Oh yeah, I forgot about Cali and their emissions testing BS. Well good luck on your FI endeavor

I survived Zdayz 2013... (barely)

future370zzz · 08-16-2013, 10:17 AM

What's up Zbro? Rob will be building a modified Stillen SC setup for me. Knowing the issues from other Stillen guys will hopefully cuts costs on improving the kit. Will be upgrading the kit to reduce heat mainly. All FI have to deal with heatsoak. I would go GTM if they were CARB approved, depends on how much risk you want to take. I can change out test pipes but don't want to remove a whole kit

If CARB is not a concern, there is the GTM MHI Twin turbo kit option also. I think I saw your post on BAZ.

Z_bro · 08-16-2013, 12:08 PM

Quote:

Originally Posted by future370zzz

What's up Zbro? Rob will be building a modified Stillen SC setup for me. Knowing the issues from other Stillen guys will hopefully cuts costs on improving the kit. Will be upgrading the kit to reduce heat mainly. All FI have to deal with heatsoak. I would go GTM if they were CARB approved, depends on how much risk you want to take. I can change out test pipes but don't want to remove a whole kit

If CARB is not a concern, there is the GTM MHI Twin turbo kit option also. I think I saw your post on BAZ.

CARB approved is a concern that is why I lean toward stillen in the first place. The 380 hp Rob told me the Stillen puts out made me think it may not be worth the money. Man one is not CARB approved and the other is sub 400hp

What are your Dyno'slooking like???

future370zzz · 08-16-2013, 12:43 PM

Quote:

Originally Posted by Z_bro

CARB approved is a concern that is why I lean toward stillen in the first place. The 380 hp Rob told me the Stillen puts out made me think it may not be worth the money. Man one is not CARB approved and the other is sub 400hp

What are your Dyno'slooking like???

Yeah, the base kit at 8psi you're probably looking at 380whp-440whp, depends on octane and supporting mods. The GTM Stage 0 kit is around 410whp (91 octane & stock exhaust) but with better torque #s that is equivalent to the Stillen if GTM ever gets CARB approval. People have gotten up to 440whp on 93 octane/catback/hfc though on Stillen kit.

Dynos can vary. I wouldn't be worried about the #. Focus on the change in #.

Just building the parts list right now but plan to upgrade injectors, pulley, impeller upgrade, test pipes and custom tune to get up to 11 or 12 psi for a goal of 450whp on 91 octane for a semi CARB legal system. A 100 octane tune is an option too. Got the CARB sticker already so. Everything I just said is hypothetical so it should not be used against me in a court of law.

You need to figure out your power goals ASAP and how much hassle you can deal with (popo) otherwise it will cost more in the long run. Need to think about additional $$$ to support the car as you push more HP/TQ. 550whp/450tq is great, just plan to replace/reinforce stuff at a faster rate.

Z_bro · 08-16-2013, 06:32 PM

Quote:

Originally Posted by future370zzz

Yeah, the base kit at 8psi you're probably looking at 380whp-440whp, depends on octane and supporting mods. The GTM Stage 0 kit is around 410whp (91 octane & stock exhaust) but with better torque #s that is equivalent to the Stillen if GTM ever gets CARB approval. People have gotten up to 440whp on 93 octane/catback/hfc though on Stillen kit.

Dynos can vary. I wouldn't be worried about the #. Focus on the change in #.

Just building the parts list right now but plan to upgrade injectors, pulley, impeller upgrade, test pipes and custom tune to get up to 11 or 12 psi for a goal of 450whp on 91 octane for a semi CARB legal system. A 100 octane tune is an option too. Got the CARB sticker already so. Everything I just said is hypothetical so it should not be used against me in a court of law.

You need to figure out your power goals ASAP and how much hassle you can deal with (popo) otherwise it will cost more in the long run. Need to think about additional $$$ to support the car as you push more HP/TQ. 550whp/450tq is great, just plan to replace/reinforce stuff at a faster rate.

You rock well stated my friend

Z_bro · 08-16-2013, 06:46 PM

They have to detail her tomorrow then she will be ready to go...They didn't have time to install the exhaust sooo I am putting the Ark up forsale forgood... I will buy an exhaust once I get to Cali!

Kingbaby · 08-16-2013, 06:48 PM

nice...but that wing is too small for the *** of that car...

Looks great and should for all the monies!

Zbrah · 08-16-2013, 07:05 PM

You make that homo blue looks so sick Bro!

Z_bro · 08-16-2013, 07:18 PM

Quote:

Originally Posted by Kingbaby

nice...but that wing is too small for the *** of that car...

Looks great and should for all the monies!

Thanks King wing is a bit small but I thought it kept it classy

Z_bro · 08-16-2013, 07:19 PM

Quote:

Originally Posted by Zbrah

You make that homo blue looks so sick Bro!

LOL hey well I am moving to San Francisco!

Z_bro · 08-17-2013, 12:51 PM

Zbrah · 08-17-2013, 03:20 PM

Quote:

Originally Posted by Z_bro

LOL hey well I am moving to San Francisco!

Oh boy, better practice your kegel exercises ASAP lol

Quote:

Originally Posted by Z_bro

Bro, that looks so sweet! gimme an *** shot now!

BrandonSS · 08-18-2013, 03:14 PM

08-16-2013, 08:06 AM	#106 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	The GTM kit would be my recommendation for you. I've never heard anybody say they love their stillen SC, they always give people trouble. The design wasn't really that great. One of the problems is that the Mafs are in the wrong spot where they get a lot of turbulence and start going on the fritz. My buddy has one and for a while his car would surge forward, then go I to limp mode for 2-3 seconds, the surge again and back into limp mode. He had to build a custom aluminum airfoil to redirect the air away from the Mafs. Then he had to replace some of the cogs cause they just sucked. All that for not much power? GTM is rock solid performance guaranteed. I'd say she'll out the extra dough if you have it and get the good stuff. If you want more info on the stillen kit, message Osiris here on the forum and he can answer your questions. I survived Zdayz 2013... (barely) __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

08-16-2013, 09:10 AM	#108 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	Oh yeah, I forgot about Cali and their emissions testing BS. Well good luck on your FI endeavor I survived Zdayz 2013... (barely) __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

08-16-2013, 10:17 AM	#109 (permalink)
future370zzz Track Member Join Date: Dec 2011 Location: Bay Area Posts: 555 Drives: 10 Nissan 370z Rep Power: 14	What's up Zbro? Rob will be building a modified Stillen SC setup for me. Knowing the issues from other Stillen guys will hopefully cuts costs on improving the kit. Will be upgrading the kit to reduce heat mainly. All FI have to deal with heatsoak. I would go GTM if they were CARB approved, depends on how much risk you want to take. I can change out test pipes but don't want to remove a whole kit If CARB is not a concern, there is the GTM MHI Twin turbo kit option also. I think I saw your post on BAZ. __________________

08-18-2013, 03:14 PM	#120 (permalink)
BrandonSS Track Member Join Date: Apr 2013 Location: Indianapolis Age: 42 Posts: 644 Drives: 2009 370z T/S/techM6 Rep Power: 13	Z_bro likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
m4a1mustang's Z Ver. II thread: Project Déjà Blue	m4a1mustang	Member's 370Z Gallery	279	08-27-2014 11:09 AM
Nissan Project 370Z vs 1970 Datsun 240Z with RB26 Track Battle!	SS_Firehawk	Nissan 370Z General Discussions	21	04-18-2013 01:55 PM
Carlisle Performance & Style May 12 - May 13, 2012	Sndtgr08	Mid-Atlantic Region	17	05-15-2012 07:40 PM
FEELER: Carlisle PA auto show	MyKindaGuise	North East Region	14	05-04-2012 08:03 AM

08-16-2013, 07:05 PM	#115 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5452	You make that homo blue looks so sick Bro!