dmhenderson's Nismo '12 GTM supercharged build thread where I freak out a lot

dmhenderson · 06-25-2013, 12:14 PM

Quote:

Originally Posted by m4a1mustang

must
always
zone
out
cooling

fgt.

Yes I got it :P

Baer383 · 06-25-2013, 12:16 PM

Quote:

Originally Posted by dmhenderson

I just talked to Sam and he said on 93 octane it wouldn't be a problem. Should I go back up to 92?

I have been trying to get that pulley from him for 2 years , I have the 92mm (11lb) on it now and have 516 @ the wheel.

Again he told me the SC would be spinning too fast and the life of the SC would be diminished

FPenvy · 06-25-2013, 12:16 PM

Quote:

Originally Posted by dmhenderson

Well I don't want to do anything to endanger the motor or the blower which is why I'm asking for advice here. Anyone know?

Is 88 safe on 93 octane?

dont ask me then you know my answer will always be more power

dmhenderson · 06-25-2013, 12:19 PM

Quote:

Originally Posted by Baer383

I have been trying to get that pulley from him for 2 years , I have the 92mm (11lb) on it now and have 516 @ the wheel.

I don't know if I want more than that tbh. How much of a difference would it make HP-wise?

Baer383 · 06-25-2013, 12:23 PM

Quote:

Originally Posted by dmhenderson

I don't know if I want more than that tbh. How much of a difference would it make HP-wise?

You will probably get 450-475hp with the 92 maybe alittle more with a dialed in tune.

dmhenderson · 06-25-2013, 12:25 PM

"failed in tune"? What does that mean?

Why would I get 450-475 if you're running 516 with the same kit?

Baer383 · 06-25-2013, 12:28 PM

Quote:

Originally Posted by dmhenderson

"failed in tune"? What does that mean?

Why would I get 450-475 if you're running 516 with the same kit?

I meant dialed in this phone sucks!!!

B/c mine is a Nismo, I had the same set up on my 2010 sport/touring and I made 470 put the same kit on my Nismo 516

dmhenderson · 06-25-2013, 12:30 PM

Quote:

Originally Posted by Baer383

I meant dialed in this phone sucks!!!

B/c mine is a Nismo, I had the same set up on my 2010 sport/touring and I made 470 put the same kit on my Nismo 516

So I have a Nismo as well vOv
Also I don't know why the trim would matter. It's the same motor.

theDreamer · 06-25-2013, 12:32 PM

Quote:

Originally Posted by dmhenderson

So I have a Nismo as well vOv
Also I don't know why the trim would matter. It's the same motor.

There is a debate if the Nismo has advanced VVEL tuning versus the basic coupe. Baer has shown there might be some truth to this debate.

Chuck33079 · 06-25-2013, 12:34 PM

Wasn't part of the hp difference due to the fact the non-nismo was a 7at?

dmhenderson · 06-25-2013, 12:35 PM

I'm gonna downgrade to the 92mm. I don't want to risk the motor and general consensus seems to be that there's a good reason they don't give you the 88mm from the jump. I can't see myself needing more than 500whp (ever) and blowing the motor up isn't on my agenda for this year.

Chuck33079 · 06-25-2013, 12:36 PM

500ish whp is a TON of power. I think you'll be fine.

dmhenderson · 06-25-2013, 12:45 PM

Quote:

Originally Posted by Chuck33079

500ish whp is a TON of power. I think you'll be fine.

I'd like to break 500 but I don't want to go any further than that.

Baer383 · 06-25-2013, 12:47 PM

Quote:

Originally Posted by dmhenderson

I'd like to break 500 but I don't want to go any further than that.

Do the 92mm and a good tune and you should be about 475-500

dmhenderson · 06-25-2013, 12:49 PM

Again, you're at 516 right? I'm assuming it should be about the same.

06-25-2013, 12:25 PM	#66 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	"failed in tune"? What does that mean? Why would I get 450-475 if you're running 516 with the same kit? __________________

06-25-2013, 12:34 PM	#70 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Wasn't part of the hp difference due to the fact the non-nismo was a 7at? __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

06-25-2013, 12:35 PM	#71 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	I'm gonna downgrade to the 92mm. I don't want to risk the motor and general consensus seems to be that there's a good reason they don't give you the 88mm from the jump. I can't see myself needing more than 500whp (ever) and blowing the motor up isn't on my agenda for this year. __________________

06-25-2013, 12:36 PM	#72 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	500ish whp is a TON of power. I think you'll be fine. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

06-25-2013, 12:49 PM	#75 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	Again, you're at 516 right? I'm assuming it should be about the same. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ENT-Z Build Thread	ENT-Z	Member's 370Z Gallery	68	09-06-2014 11:00 PM
Snakes' build thread	Snakes709	Other Vehicles	124	04-07-2013 11:39 PM
California build thread	bigaudiofanat	Audio & Video	95	01-28-2012 12:00 AM
Password:JDM 2011 370Z Nismo #170 Build Thread	PasswordJDM	Member's 370Z Gallery	31	11-24-2011 06:32 PM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD	Reaper42	Forced Induction	14	01-22-2011 06:24 PM