MKG's Custom Single Turbo Build

Isamu · 08-10-2013, 09:23 PM

Quote:

Originally Posted by MyKindaGuise

Haha I just want mine TO boost

boosted_mx5 · 08-11-2013, 11:20 AM

Hang up's is an understatement. Lol.
Blew an intercooler pipe, found an unplugged sensor. Had to retune fuel map.

Somehow the spark plugs failed. Two and half hours and $180 later we have new GTR plugs which, incidentally, are the same part number as the stock 370 plugs. Some how it magically fixes it.

Start to tune again and get fuel dialed in boost. 3 power pulls (tweaking fuel not timing or anything yet, and I could hear a boost leak but couldn't find it) and we hit 400/351.

3rd pull it shuts off. Frantic hours trying to find what has melted.

11pm call triple a and get a tow truck scheduled for 12:30 eta. Also find a load of melted wires. Push car onto lift and start cutting, splicing and re-routing wires.

12:10 truck shows up and I've got 6 or so wires to go. However at this point is 2 greens and 2 whites, without any way to distinguish between them. I'm ready to give up. However the car starts.

12:30 Send the truck away, start taping and tucking and zip tie-ing the shiz out of the wires. Also re-installed the down pipe.

1:00ish test drive.

1:30 finally at a gas station and leaving

around 2:30ish we pull over and I immediately spot the boost leak. FML it's post MAF so of course the fuel map will need re done again.

However once these issues are fixed I think we could definitely hit 420-450whp before we starting to up the boost.

Oh yeah M.R. Performance is f*cking incredible the owner went and waited two hours to get us spark plugs, he also waited with the us and didn't kick us out of the shop.

Visconti did do an awesome job getting fuel dialed in boost despite having a leak so we were able to make it home fine.

Also the car is freaking quick now. I can't wait to add another 100hp/100tq.

yellogixxer · 08-11-2013, 07:04 PM

That sounds like an ordeal! Worth it, though.

boosted_mx5 · 08-12-2013, 10:02 PM

Quote:

Originally Posted by yellogixxer

That sounds like an ordeal! Worth it, though.

Lol. I got up at 5:30am and got home at 5:30am.

MyKindaGuise · 08-19-2013, 10:28 AM

Took the cars out this weekend. The car still drives incredibly well even with the boost leak. Hoping to find time this week to etune with John now that my laptop is fixed. Anyways we went to a local drive in for dinner and a few minutes later we had a nice sized crowd hovering around the cars.

Turbo blanket is getting fully secured today and some more touch up crap. Build is pretty much done so it is just odds n ends anymore. Probably wont be updating much anymore unless it is new parts. Probably buying a Chevy s10 for winter here very soon so maybe ill include that occasionally.

Also was told this weekend that my car should be idling and cruising at an 11-11.5 afr hahaha. yeah no. Please no one take that info. That is just horrible.

As for soon to see updates...
New Dynos with the retune for boost leak fix. Expect 450whp
New Dynos on 10 and 12lbs of boost. Expect 500ish and boatloads of torque.

Isamu · 08-19-2013, 06:07 PM

Quote:

Originally Posted by MyKindaGuise

Took the cars out this weekend. The car still drives incredibly well even with the boost leak. Hoping to find time this week to etune with John now that my laptop is fixed. Anyways we went to a local drive in for dinner and a few minutes later we had a nice sized crowd hovering around the cars.

Turbo blanket is getting fully secured today and some more touch up crap. Build is pretty much done so it is just odds n ends anymore. Probably wont be updating much anymore unless it is new parts. Probably buying a Chevy s10 for winter here very soon so maybe ill include that occasionally.

Also was told this weekend that my car should be idling and cruising at an 11-11.5 afr hahaha. yeah no. Please no one take that info. That is just horrible.

As for soon to see updates...
New Dynos with the retune for boost leak fix. Expect 450whp
New Dynos on 10 and 12lbs of boost. Expect 500ish and boatloads of torque.

you really are copying me! lol I have an s-10 too

I can't wait to see what your numbers are like bro!

G37Sam · 08-19-2013, 07:18 PM

I think 12psi might be asking for trouble on a stock block and remember, high torque = high engine pressure, the con rods may not like that. Just my 2 cents

Chuck33079 · 08-19-2013, 07:23 PM

To be fair, he's running a smaller turbo than some of the other builds. It's not really about psi as much as cfm.

Isamu · 08-19-2013, 08:31 PM

Quote:

Originally Posted by Chuck33079

To be fair, he's running a smaller turbo than some of the other builds. It's not really about psi as much as cfm.

Baer383 · 08-19-2013, 09:04 PM

Quote:

Originally Posted by MyKindaGuise

Also was told this weekend that my car should be idling and cruising at an 11-11.5 afr hahaha. yeah no. Please no one take that info. That is just horrible.

That was not the info given in the other thread maybe if mx5 could read retain info and tell you,you probably wouldn't have so many problems with your tune.

boosted_mx5 · 08-19-2013, 09:12 PM

Quote:

Originally Posted by Baer383

That was not the info given in the other thread maybe if mx5 could read retain info and tell you,you probably wouldn't have so many problems with your tune.

Go **** in someone else's thread fucker

Baer383 · 08-19-2013, 09:15 PM

Quote:

Originally Posted by boosted_mx5

Go **** in someone else's thread fucker

Your the dumb azz that can't even give your friend the right info from a thread you read.

boosted_mx5 · 08-19-2013, 09:17 PM

Quote:

Originally Posted by Baer383

Your the dumb azz that can't even give your friend the right info from a thread you read.

He can read an interprets as he pleases. I don't decide what comes out of his mouth or through his keyboard. Like I said before, we had a miscommunication I had no issues with you until you come in here and accuse me of things I don't do. Don't attack my credibility.

SPOHN · 08-19-2013, 09:18 PM

Quote:

Originally Posted by boosted_mx5

Go **** in someone else's thread fucker

Touchy

Baer383 · 08-19-2013, 09:21 PM

Quote:

Originally Posted by boosted_mx5

He can read an interprets as he pleases. I don't decide what comes out of his mouth or through his keyboard. Like I said before, we had a miscommunication I had no issues with you until you come in here and accuse me of things I don't do. Don't attack my credibility.

Sorry,

maybe your buddy is the dumbazz

08-11-2013, 11:20 AM	#362 (permalink)
boosted_mx5 Base Member Join Date: Oct 2012 Location: Pa Posts: 40 Drives: 01 Miata Rep Power: 13	Hang up's is an understatement. Lol. Blew an intercooler pipe, found an unplugged sensor. Had to retune fuel map. Somehow the spark plugs failed. Two and half hours and $180 later we have new GTR plugs which, incidentally, are the same part number as the stock 370 plugs. Some how it magically fixes it. Start to tune again and get fuel dialed in boost. 3 power pulls (tweaking fuel not timing or anything yet, and I could hear a boost leak but couldn't find it) and we hit 400/351. 3rd pull it shuts off. Frantic hours trying to find what has melted. 11pm call triple a and get a tow truck scheduled for 12:30 eta. Also find a load of melted wires. Push car onto lift and start cutting, splicing and re-routing wires. 12:10 truck shows up and I've got 6 or so wires to go. However at this point is 2 greens and 2 whites, without any way to distinguish between them. I'm ready to give up. However the car starts. 12:30 Send the truck away, start taping and tucking and zip tie-ing the shiz out of the wires. Also re-installed the down pipe. 1:00ish test drive. 1:30 finally at a gas station and leaving around 2:30ish we pull over and I immediately spot the boost leak. FML it's post MAF so of course the fuel map will need re done again. However once these issues are fixed I think we could definitely hit 420-450whp before we starting to up the boost. Oh yeah M.R. Performance is f*cking incredible the owner went and waited two hours to get us spark plugs, he also waited with the us and didn't kick us out of the shop. Visconti did do an awesome job getting fuel dialed in boost despite having a leak so we were able to make it home fine. Also the car is freaking quick now. I can't wait to add another 100hp/100tq. Isamu, yellogixxer and MyKindaGuise like this.

08-11-2013, 07:04 PM	#363 (permalink)
yellogixxer Base Member Join Date: Jan 2012 Location: Reading, Pa Posts: 248 Drives: 07 C6 M6 Cpe Rep Power: 13	That sounds like an ordeal! Worth it, though. MyKindaGuise likes this. __________________ '07 C6 6MT Coupe 03 Accord, DD, 400k miles

08-19-2013, 07:18 PM	#367 (permalink)
G37Sam A True Z Fanatic Join Date: Dec 2008 Location: Dubai, UAE Posts: 1,507 Drives: RB'd G37 Rep Power: 21	I think 12psi might be asking for trouble on a stock block and remember, high torque = high engine pressure, the con rods may not like that. Just my 2 cents __________________ '14 Viper GTS '08 RB'd G37S - Sold

08-19-2013, 07:23 PM	#368 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	To be fair, he's running a smaller turbo than some of the other builds. It's not really about psi as much as cfm. MyKindaGuise likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Boosted Performance single turbo build	Boosted Performance	Forced Induction	1841	09-06-2016 12:17 PM
Twin Turbo vs. Single Turbo V6: A Dissertation	Mike@GTM	Forced Induction	115	08-14-2014 10:04 PM
Big build single turbo G37	SRperformance	Forced Induction	9	10-11-2012 06:01 PM
S&R Performance single build about to begin!	valpozguy	Forced Induction	66	05-30-2012 09:19 PM
Will we see a SINGLE turbo kit?	Brazilbro	Forced Induction	17	07-03-2009 05:03 PM