Here they are installed.
http://img.tapatalk.com/d/14/05/21/avyteqa5.jpg
http://img.tapatalk.com/d/14/05/21/8ese6evy.jpg
They are very pretty and I suspect will cool much better due to a more open hub design and the neat cooling channels between the rotors

After about 2 years of Hard driving and occasional track abuse I have developed an leak between my exhaust manifolds and both Berk HFCs that are generating O2 sensor "Check Engine' lights (specifically P2A00, P2A03)

I have a Gopoint OBD2 module permanently mounted and blue-toothed into my phone, so resetting the light is just a button tap away, but the leak is noisy and eventually I'll have to get my emissions done again, so I'm fixing with a new gasket from Z1.

Z1 Metal HR/VHR Manifold 3 Bolt Gaskets

With luck these will seal the leak and get me back to the track with no more leaks.

I just ordered a Z hitch from Fastguy9r.
http://www.the370z.com/parts-sale-pr...z-hitches.html

This should be the beginnig of a cool track trailer project. I'm hoping to bring gas, track tires, fuel, a shade tent and some tools on a small trailer. The biggest benefit will be no more fuel fumes in my car from leaky gas cans on track day.

Gaskets are in. It was kind of a bitch, but the o2 codes are gone!

here's the burnt out gaskets
Nissan 370Z Forum - SurfDog's Album: Surfdog 09 370z sport - Picture

here are some shots post install of the new Zspeed gasket.
Nissan 370Z Forum - SurfDog's Album: Surfdog 09 370z sport - Picture
Nissan 370Z Forum - SurfDog's Album: Surfdog 09 370z sport - Picture

finally here is my very tight work environment. Time to lose the gut so I can fit under there better.
http://www.the370z.com/members/surfd...der-there.html

Car's looking good and glad you solved the problem mate

I'm headed to the track this week so my hawk ceramics are coming out and Hawk plus pads are going in. they are dusty and loud, but I ran the ceramics on the track for a lap day about a month ago and missed the no fade reliability of the race pads. I will probably swap the plus pads back out after track day is over.

http://img.tapatalk.com/d/14/09/04/7aturesa.jpg
http://img.tapatalk.com/d/14/09/04/ymepyqag.jpg
http://img.tapatalk.com/d/14/09/04/jy7u4aja.jpg
Whew pads in!!

... The generic dot 4 is for my clutch.

Big order today
1 x SPL Front Upper Control Arms (370Z / G37) = $764.00
1 x Stillen 370Z Front Brake Cooling Kit = $291.00
Fascia Type OEM (Non-Nismo)
1 x GM Advan RS 18X10+15 Used wheels = $1,450.00
4 x Toyo RA1 275/35 R18 = $1,104.00

http://img.tapatalk.com/d/14/09/25/2u2uzu6y.jpg

SPL Front Upper Control Arms (370Z / G37)

Stillen 370Z Front Brake Cooling Kit

http://www.tirerack.com/tires/tires....del=Proxes+RA1

Exited!

Nice man, can't wait to see it on the car, as mine is silver as well. So many wheel options, I can't make up my mind.

I've been running two sets of 19 inch rays. OEM 09 silver, and 09 with black powder coat. I like the black better. (Some pictures of both are above in the thread)

Nice build! I saw that u installed the 2 piece rotors, the look like they might have been installed backwards. I think the vanes need to be towards the front

:bowrofl: was hoping nobody would catch that. So embarrassing and so true.

In my defense I did catch it last brake change and am planing to swap them when I pull off my track pads next week.

Actually I'll probably do them once the a arms arrive. Less trips up onto the jack stands!

:tup: post pics of the arms you bought!
Wish I had a garage smh