Mitco39's Build

SurfDog

cheers!

__________________
09 6spd Berk CBE, JWT cams, ZSpeed CSC, Stillen (25 row oil, brake cooling, sways, gen3 CAI), Passport (9500ci), Quaife LSD, Z1 400 hp kit, ss lines, pads, rotors, clutch etc, Phunk's pan and fuel starve fix

theDreamer

Yeah, tough since you have the heated seat switches, can put one item there in the base.
Crazy idea, maybe wire it up to the headliner area where the two lights are? There is already a slight bulge but I am not sure how thick those two units are.

__________________
theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN
theDreamer's Silvia // URAS // GREDDY
Houston Zs // Facebook // Twitter // Instagram

Mitco39

The Racelogic is pretty thick, the EVC not so much but thats getting a bit to involved for me. I was thinking about putting the EVC above the mirror but then cord length would be an issue as you would have to go around the windshield and down the pillar. The way I have them now I can easily move them with minimal work so ill try them out and if I dont like it I can move them somewhere else.

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html

diddy535

Sub'd. Great build! Look forward to seeing where you put the boost and traction controls!

__________________

Mitco39

Thanks,

I spent an hr and a half today fighting with the wiring for the traction control, finally got it all together and tucked out of the way of the passengers feet. I am hoping to have it all together by the weekend, we will see if that happens. Seems everytime I plan to go work on it something comes up and I have to put it off.

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html

Mitco39

A Couple runs...

This is with the non resonated FI exhaust and the single blow off valve on the hot side of the intercooler.




Little bit of Rev Limiter in this one.

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html

wheee!

This is going to be such a fun car to drive this summer! Love the work you've done Mitch!

__________________

Mitco39

Thanks Mark,

It was my first real time taking it out on the highway this morning, it is pretty droney unfortunately but ill get used to it, the GF on the other hand, I guess we'll see. She doesn't have much choice, haha.

Shes going in for 3M tonight after work at European auto tinting, which is why I took it in with me this morning.

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html

G37sHKS

Maaaaan listen to that external wastegate!!

Lovely build

__________________

wheee!

The drone can be an issue with the FI exhaust, hence why I like my HKS! There are a few people that have done mods to the system to add resonation pipes to cance the drone. I will look for the threads....

At European, mention to Rob (Owner) that you are a member of the Z Car Club and were recommended to go there for a possible discount... I got my car done there too....
Plus check out the 3M DiNoc material he has there.... cool stuff to play with. I just did my door switch plates and it looks really good!

__________________

Mitco39

Yeah, but it just sounds sooo good. James at the res pipes on his FI and he took them off. I am curious to see what he thinks of the noise difference in the car. I cant imagine what it would have been like without all the matting I put in the car.

I will see if they will give me some sort of Z club discount, I am also going to make sure that they know I want the car stored inside and that they should not have the leave the lot with it. Just a wee bit nervous leaving it, the only other person that had it was Sasha.

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html

wheee!

ummm.... I never leave the shop while it's being worked on.... anywhere I take it! lol

The resonation tubes get mounted at the canisters on the mufflers, not in the midpipe. Like I said, they are helmholz resonators like the grenades on my HKS...


edit: Found the thread: Fancy Tech: How to Get Rid of Exhaust Drone, works great!

__________________

GaleForce

Nice vids Mitch.

__________________

Mitco39

He said they need it for at least a day and a night, and they are only open week days. You sat around and waited while your car was 3m'd? hmm.

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html

Mitco39

Also thanks for the link, they just added a Helmholz to it. Which I may consider after I put some hours on the car.

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html