Mitco39's Build

Mitco39 · 03-05-2013, 09:01 PM

So it turns out that the stock gauge power wire will not power the 3 PLX gauges. On a related note, anyone know what fuse powers the stock gauges? Lol. I checked a few down on the drivers side panel, but they all seemed good. I guess I'll have to pull out the voltmeter. Haha

GaleForce · 03-05-2013, 09:07 PM

Quote:

Originally Posted by Mitco39

So it turns out that the stock gauge power wire will not power the 3 PLX gauges. On a related note, anyone know what fuse powers the stock gauges? Lol. I checked a few down on the drivers side panel, but they all seemed good. I guess I'll have to pull out the voltmeter. Haha

Maybe under the hood at the IPDM?

wheee! · 03-05-2013, 09:54 PM

Not there, I checked my data on the steering lock fuse pull...

Zat_Zuma · 03-05-2013, 10:21 PM

If I remember correctly the Instrumention BCM controls the power to the meters and there is no seperate fuse for the triple meter.

I ran a switched power supply from the under dash fuses and used a "add a fuse" connector from PA or CT for my instrumentation power supplies.

Mitco39 · 03-05-2013, 11:53 PM

Quote:

Originally Posted by Zat_Zuma

If I remember correctly the Instrumention BCM controls the power to the meters and there is no seperate fuse for the triple meter.

I ran a switched power supply from the under dash fuses and used a "add a fuse" connector from PA or CT for my instrumentation power supplies.

Uhoh, well I hope I didnt **** anything up then. Everything else continued to work just fine, I just lost power at that wire. Off to the service manual I go.

What do you mean by a "add a fuse" connector? I was going to probably just run a relay system, but this might be easier.

Thanks

Mitch

Mitco39 · 03-06-2013, 12:00 AM

Found it.

Zat_Zuma · 03-06-2013, 10:01 PM

Check out the electrical section at PA or CT and they are there. Simple easy solution
for adding extra fused power sources.

Mitco39 · 03-12-2013, 08:37 PM

Daddy Likes

GaleForce · 03-12-2013, 10:20 PM

Very nice

ENT-Z · 03-13-2013, 07:05 PM

Looks familiar!!

JMac88 · 03-14-2013, 10:46 AM

Looks like every other civic now with no bumper

Sent from my SGH-T889V using Tapatalk 2

wheee! · 03-14-2013, 10:57 AM

Quote:

Originally Posted by JMac88

Looks like every other civic now with no bumper

Sent from my SGH-T889V using Tapatalk 2

Nope. I don't see a transformers logo anywhere....

JMac88 · 03-14-2013, 11:16 AM

Quote:

Originally Posted by wheee!

Nope. I don't see a transformers logo anywhere....

He has them listed...

Quote:

Originally Posted by Mitco39

Exterior Stuff:[LIST][*]Window Tint - I believe 20%[*]Raul G Painted Head Lights[*]Black Chrome Badges[*]Satin Black Door Handles[*]6000K HID Bulbs[*]Kellyefields Custom Hood Damper Kit[*]Transformers Stickers

Haha sorry Mitch, couldn't resist
Sent from my SGH-T889V using Tapatalk 2

Mitco39 · 03-14-2013, 11:20 AM

I did put the bumper on last night as well as the front sway endlinks, took some pictures for you trollers as well

. I have 0 leaks after running it so now while I am waiting for the racelogic I will finish up the exterior, I bought the Adams starter kit, so the car will be getting clayed and waxed and ready to get all dirty.

Mitco39 · 03-14-2013, 01:09 PM

Front Endlinks

Dirty bumper back on

Getting close, gotta finish up the engine bay then just electronics. Once the snow is gone I am going to drive the car out to my parents farm and lift it up in the air (without a lift

) and go to town on replacing the clutch and flywheel. I have to get this done with enough time left to drive it enough to get through the break in period for the dyno at the beginning of may.

03-05-2013, 09:01 PM	#121 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 132	So it turns out that the stock gauge power wire will not power the 3 PLX gauges. On a related note, anyone know what fuse powers the stock gauges? Lol. I checked a few down on the drivers side panel, but they all seemed good. I guess I'll have to pull out the voltmeter. Haha __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

03-05-2013, 09:54 PM	#123 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 57 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	Not there, I checked my data on the steering lock fuse pull... __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

03-05-2013, 10:21 PM	#124 (permalink)
Zat_Zuma A True Z Fanatic Join Date: Nov 2008 Location: Edmonton, Alberta ...eh Posts: 1,171 Drives: 2017 Touring auto Rep Power: 19	If I remember correctly the Instrumention BCM controls the power to the meters and there is no seperate fuse for the triple meter. I ran a switched power supply from the under dash fuses and used a "add a fuse" connector from PA or CT for my instrumentation power supplies. __________________ [B]2009 & 2017 370Z Touring Sport Autos SOLD

03-06-2013, 10:01 PM	#127 (permalink)
Zat_Zuma A True Z Fanatic Join Date: Nov 2008 Location: Edmonton, Alberta ...eh Posts: 1,171 Drives: 2017 Touring auto Rep Power: 19	Check out the electrical section at PA or CT and they are there. Simple easy solution for adding extra fused power sources. Mitco39 likes this. __________________ [B]2009 & 2017 370Z Touring Sport Autos SOLD

03-12-2013, 08:37 PM	#128 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 132	Daddy Likes ENT-Z, wheee!, Mr&Mrs and 3 others like this. __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

03-12-2013, 10:20 PM	#129 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Very nice Mitco39 likes this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

03-13-2013, 07:05 PM	#130 (permalink)
ENT-Z Enthusiast Member Join Date: Feb 2009 Location: St. Louis, MO Posts: 460 Drives: 09 MB 6MT 370Z Rep Power: 16	Looks familiar!! Mitco39 likes this.

03-14-2013, 10:46 AM	#131 (permalink)
JMac88 Enthusiast Member Join Date: Jun 2010 Location: Edmonton AB Posts: 416 Drives: 2010 PW 370z Rep Power: 15	Looks like every other civic now with no bumper Sent from my SGH-T889V using Tapatalk 2 Mitco39 likes this. __________________ Full Mod List

03-14-2013, 11:20 AM	#134 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 132	I did put the bumper on last night as well as the front sway endlinks, took some pictures for you trollers as well . I have 0 leaks after running it so now while I am waiting for the racelogic I will finish up the exterior, I bought the Adams starter kit, so the car will be getting clayed and waxed and ready to get all dirty. GaleForce likes this. __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

03-14-2013, 01:09 PM	#135 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 132	Front Endlinks Dirty bumper back on Getting close, gotta finish up the engine bay then just electronics. Once the snow is gone I am going to drive the car out to my parents farm and lift it up in the air (without a lift ) and go to town on replacing the clutch and flywheel. I have to get this done with enough time left to drive it enough to get through the break in period for the dyno at the beginning of may. wheee! likes this. __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which HFC for a TT or SC Build	swiss370Z	Forced Induction	21	09-11-2012 09:10 AM
Possible Nos build	triadz	Forced Induction	7	04-06-2012 11:30 AM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD	Reaper42	Forced Induction	14	01-22-2011 06:24 PM
My build	toner123	Forced Induction	108	09-10-2010 09:31 AM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 01:40 AM