Mitco39's Build

Mitco39

I also decided to remove the seats and center console to put some matting under them. I have not decided whether or not I am going to pull out the whole rug or just fold up the sections I am working on. Ill have to see how its secured to the front of the car under the dash. I will also have plenty of room to install the RJM clutch while I have the drivers seat out.

The rug is fillthy, the lady who owned it before me had a dog that spent alot of time in the car :/. I am going to clean it all up before putting the seats back in.

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html

GaleForce

May as well pull the dash out while you have the seats out.

__________________

Mitco39

Ill get there eventually, I am still waiting on a gauge to show up so I am not in a huge rush to pull it a part yet. Starting to run out of things to do to it, haha. What does suck is I cannot put the paneling back on because it almost comes off from the back and then works its way to the front.

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html

O&G

Yea, it goes back, front and side to side....ahhyea!!

__________________
O&G's Build/Journal <---(1st lowmount single turbo treeseventy)
Built Engine Thread
2011 F-250 Build/Journal

Mitco39

I got some pictures of my completed head lights today by Raul G. They look amazing, cant wait to get them on the car.

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html

wheee!

Wait a second.... am I going to be the only one in Edmonton without custom headlights?

__________________

wheee!

and BTW, did you swap your shifter before the turbo install?

__________________

Mitco39

Nope, but it all has to come out to do the clutch here when the roads clear up, so ill just do it then Its not a huge job to remove the turbo and piping, a few bolts and clamps.

I think I am going to plasti dip the fangs in the front and around the rear fog light in the back this week while I wait for more parts to show up. I think that will match the headlights and emblems and blend it all together.

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html

djpathfinder

Nice build so far. I had a 40th too (I bought the first one Sherwood Nissan got in), so I'm still partial to it.

__________________
2012 GT-R Black Edition Jet Black
2010 370Z 40th Anniversary // SOLD

Mitco39

Thanks! I did notice that while looking for my 370Z there was ALOT of 40ths for sale, most of them in Ontario. Leads me to believe there has to be more than 1000, haha.

One day ill move up to the GTR, although I think I am going to like this thing to much to even consider it for some time.

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html

Mitco39

I got the SPC arms in in the front today as well as the camber arms in the back. I didnt have the right tools to bore out that Toe adjuster so I just put the new bolts in and will hope for the best when it comes to alignment. If I cant get within spec then I will worry about either getting a shop to do it or buying the right tools to do it myself. I also got the spacers on and the tires seem to stick out a fair bit. Ill have to see what they look like once I take the car off the jack stands.










I also got a GTM traction control unit on the way, I am thinking I will wait to tear the dash out until the first few weeks in march after I have everything that needs to go behind it ready to go. I would like to finish up the matting and get the rest of the trunk done and put back together before tearing out the dash. Its alot to remember where stuff goes, haha.

I think this weekend if I get enough time I am going to paint my fangs and around the rear fog light with some plasti dip. I figured it will match the lights and door handles.

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html

djpathfinder

The wheels and tires will tuck in once the car is lowered off the stands and it sits on its own suspension.

__________________
2012 GT-R Black Edition Jet Black
2010 370Z 40th Anniversary // SOLD

GaleForce

GTM traction control unit! Cool! I'll have to check it out.

__________________

Mitco39

It aint cheap, but from what I could find on it it sounds pretty awesome. They just take a Racelogic brain and build their own harnesses so that it is all plug and play, no cutting of any wires.

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html

Mitco39

One of the only good videos of the Racelogic doing its thing. The in car video starts around 3:00.

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html