Mitco39's Build

Mitco39 · 02-28-2013, 10:17 AM

I spent some time starting to put these gauges in the dash. Overall I am pretty happy with the look. I will post up some pictures of how I will secure them later this week for guys to refer to if any of you plan on doing the same. Overall its pretty straight forward, just got to take your time with the dremel.

Mitco39 · 02-28-2013, 10:24 AM

I also installed the fuel gauge overlay, overall pretty happy with it. Didnt line up 100% but I got it very close.

GaleForce · 02-28-2013, 10:28 AM

Looking good! Is this the last of your mods?

Mitco39 · 02-28-2013, 10:34 AM

I have to install the RJM clutch pedal, should be easy with everything out of the way. Then I am working with a guy (not sure if he is looking to go public yet) to install a racelogic traction control system with the no lift shift and launch control which should be damn near plug and play for us. Just waiting on the parts to arrive.But other than that I should be ready to start piecing it all together here.

I hope to be able to take it out for a spin 3 weekends from now if everything works out, probably without the racelogic but we'll see how that goes. I still have to do the clutch but that wont be something I will be able to do in the garage, ill either have to take it out to my parents farm and tough it out without a lift, or find someone or place that has a lift for me to use. I believe a bunch of us Edmonton guys have a Dyno session with the guys from specialty Z in May, so I would like to have the clutch broken in by then.

Getting closer tho!

GaleForce · 02-28-2013, 11:50 AM

That racelogic setup sounds very cool.

O&G · 02-28-2013, 03:57 PM

I'll be watching to see how your racelogic setup works out. Great company!

SPOHN · 02-28-2013, 05:22 PM

Great build

Mitco39 · 03-01-2013, 12:20 AM

Here is a few pictures of exactly how I went about attaching the gauges to the dash.

I bought these from Canadian tire for something like $1.50 each.

From there I took a dremel cut off the 2 pieces lengthwise as shown here.

I used a dab of superglue to hold the nut aligned on the middle hole of the metal piece. Once it was tacked I JB welded it so that I would not have to hold it from spinning when clamping it down on the dash. I then bent both ends of the metal upwards to hook under the dash. I used a 3/16" screw that was 3" long (I wouldn't go any shorter).

I then drilled a hole in the top of the gauge cover one size bigger than 3/16".

I then sanded down the top of the head of the bolt to try and get it more flush so that the hat would sit evenly on top of the gauge. In order to sink the bolt head into the cap I ended up going with a 5/8" (or so) drill bit and went down about 1/16 of an inch into the hole I drilled so that it created a dish that the head of the bolt would sit in and bring it more flush with the gauge mount.

I was able to get it pretty close but I also took a flapper wheel to the underside of each hat to get it to fit perfectly, then I just put a tap of silicone under it to hold it. And the finished thing. Minus the crappy iphone pic.

Mitco39 · 03-01-2013, 12:23 AM

To wire the gauges I tapped into the power source for the original stock gauges and ran the wires down to the passenger side foot well. I have to figure out where I am going to mount all the control boxes for the gauges. But thats for another day.

Also when I had it all out I wired in Brian's @Thecarkitcompany backup cam and bypass harnesses. Now just to put on the center console.

GaleForce · 03-01-2013, 12:39 AM

Those gauges must be fairly thin. I wasn't able to do what you did, and I had to cut most of the plastic away under the top hat.

Mitco39 · 03-01-2013, 09:38 AM

They are indeed thin.

GaleForce · 03-01-2013, 09:42 AM

I should have known it was PLX. The a-pillar I made with the carbon fibre treatment used a PLX gauge, very easy to work with.

Mitco39 · 03-05-2013, 01:00 PM

Finished matting both doors (I opted to drill the rivet out instead of removing the glass, much much easier).

And I also put some oil in her and fired it up!

I am going to piss some neighbors off, the girlfriend was 2 floors up showering and she heard the car start. Its not even that loud, just very deep. Its deep enough to rattle to lattice above the garage. I let it warm up fully while checking and finding a few oil leaks. Tightened up the fittings and they look to be good, but I would like to rev it to be sure (not something I can do in the garage, haha). I am going to finish wiring in the gauges (just have to wire in the modules, everything else is ran) and hook up the boost controller. Then I would like to take it for a burn before I put everything back on the front to make sure there are no further leaks.

Sooo excited. haha

wheee! · 03-05-2013, 01:15 PM

Niiiiice!

GaleForce · 03-05-2013, 01:20 PM

Spring is getting close

02-28-2013, 10:17 AM	#106 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 132	I spent some time starting to put these gauges in the dash. Overall I am pretty happy with the look. I will post up some pictures of how I will secure them later this week for guys to refer to if any of you plan on doing the same. Overall its pretty straight forward, just got to take your time with the dremel. GaleForce likes this. __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

02-28-2013, 10:24 AM	#107 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 132	I also installed the fuel gauge overlay, overall pretty happy with it. Didnt line up 100% but I got it very close. __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

02-28-2013, 10:28 AM	#108 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Looking good! Is this the last of your mods? Mitco39 likes this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

02-28-2013, 10:34 AM	#109 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 132	I have to install the RJM clutch pedal, should be easy with everything out of the way. Then I am working with a guy (not sure if he is looking to go public yet) to install a racelogic traction control system with the no lift shift and launch control which should be damn near plug and play for us. Just waiting on the parts to arrive.But other than that I should be ready to start piecing it all together here. I hope to be able to take it out for a spin 3 weekends from now if everything works out, probably without the racelogic but we'll see how that goes. I still have to do the clutch but that wont be something I will be able to do in the garage, ill either have to take it out to my parents farm and tough it out without a lift, or find someone or place that has a lift for me to use. I believe a bunch of us Edmonton guys have a Dyno session with the guys from specialty Z in May, so I would like to have the clutch broken in by then. Getting closer tho! ENT-Z, wheee!, O&G and 1 others like this. __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

02-28-2013, 11:50 AM	#110 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	That racelogic setup sounds very cool. ENT-Z and O&G like this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

02-28-2013, 03:57 PM	#111 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 42 Posts: 1,212 Drives: 40th Anv. Rep Power: 23	I'll be watching to see how your racelogic setup works out. Great company! Mitco39 likes this. __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

02-28-2013, 05:22 PM	#112 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Great build Mitco39 likes this. __________________

03-01-2013, 12:20 AM	#113 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 132	Here is a few pictures of exactly how I went about attaching the gauges to the dash. I bought these from Canadian tire for something like $1.50 each. From there I took a dremel cut off the 2 pieces lengthwise as shown here. I used a dab of superglue to hold the nut aligned on the middle hole of the metal piece. Once it was tacked I JB welded it so that I would not have to hold it from spinning when clamping it down on the dash. I then bent both ends of the metal upwards to hook under the dash. I used a 3/16" screw that was 3" long (I wouldn't go any shorter). I then drilled a hole in the top of the gauge cover one size bigger than 3/16". I then sanded down the top of the head of the bolt to try and get it more flush so that the hat would sit evenly on top of the gauge. In order to sink the bolt head into the cap I ended up going with a 5/8" (or so) drill bit and went down about 1/16 of an inch into the hole I drilled so that it created a dish that the head of the bolt would sit in and bring it more flush with the gauge mount. I was able to get it pretty close but I also took a flapper wheel to the underside of each hat to get it to fit perfectly, then I just put a tap of silicone under it to hold it. And the finished thing. Minus the crappy iphone pic. Mr&Mrs and O&G like this. __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

03-01-2013, 12:23 AM	#114 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 132	To wire the gauges I tapped into the power source for the original stock gauges and ran the wires down to the passenger side foot well. I have to figure out where I am going to mount all the control boxes for the gauges. But thats for another day. Also when I had it all out I wired in Brian's @Thecarkitcompany backup cam and bypass harnesses. Now just to put on the center console. wheee! likes this. __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

03-01-2013, 12:39 AM	#115 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Those gauges must be fairly thin. I wasn't able to do what you did, and I had to cut most of the plastic away under the top hat. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

03-01-2013, 09:38 AM	#116 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 132	They are indeed thin. __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

03-01-2013, 09:42 AM	#117 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	I should have known it was PLX. The a-pillar I made with the carbon fibre treatment used a PLX gauge, very easy to work with. ENT-Z and wheee! like this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

03-05-2013, 01:00 PM	#118 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 132	Finished matting both doors (I opted to drill the rivet out instead of removing the glass, much much easier). And I also put some oil in her and fired it up! I am going to piss some neighbors off, the girlfriend was 2 floors up showering and she heard the car start. Its not even that loud, just very deep. Its deep enough to rattle to lattice above the garage. I let it warm up fully while checking and finding a few oil leaks. Tightened up the fittings and they look to be good, but I would like to rev it to be sure (not something I can do in the garage, haha). I am going to finish wiring in the gauges (just have to wire in the modules, everything else is ran) and hook up the boost controller. Then I would like to take it for a burn before I put everything back on the front to make sure there are no further leaks. Sooo excited. haha wheee!, Mr&Mrs, O&G and 1 others like this. __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

03-05-2013, 01:15 PM	#119 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 58 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	Niiiiice! Mitco39 likes this. __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

03-05-2013, 01:20 PM	#120 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Spring is getting close Mitco39 likes this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which HFC for a TT or SC Build	swiss370Z	Forced Induction	21	09-11-2012 09:10 AM
Possible Nos build	triadz	Forced Induction	7	04-06-2012 11:30 AM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD	Reaper42	Forced Induction	14	01-22-2011 06:24 PM
My build	toner123	Forced Induction	108	09-10-2010 09:31 AM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 01:40 AM