The Sophia Project

Masterbeatty · 04-23-2014, 07:35 PM

I would also leave a nice steaming pile of scat on GTM's door step also because it's probably from break down and reassembly of you're S/C kit. But that's good everything worked out with the A/C compressor getting repaired.

SS_Firehawk · 04-24-2014, 11:23 AM

Quote:

Originally Posted by Masterbeatty

I would also leave a nice steaming pile of scat on GTM's door step also because it's probably from break down and reassembly of you're S/C kit. But that's good everything worked out with the A/C compressor getting repaired.

This was going on before GTM, but I've been gone so it went from passable AC to nothing since 07/2012. I did grab my car yesterday and had a good talk with Joe., the GTR master tech who took care of my car. He found a very small oil leak, swapped my ATE super blue for GTR fluid, because he saw I had a maintenance plan (hell, I didn't know I had one), replaced my cabin filter, fixed the AC of course and offered to help with anything else with the car. I know where to take my ride here in PHX. I almost wanted it to be hot yesterday so I had a reason to use it.

Hotrodz · 04-24-2014, 09:14 PM

Sweet...did you ask him about there being a possible vacuum leak?

SS_Firehawk · 04-25-2014, 02:49 AM

Quote:

Originally Posted by Hotrodz

Sweet...did you ask him about there being a possible vacuum leak?

He said he would need more time with the car to figure everything out.

SS_Firehawk · 04-29-2014, 08:26 AM

Met a guy at the pavilions who has a shop that focuses on Z's and G's. He offered to look at my car for free this past Sunday. I showed up and he was true to his word. Unfortunately they couldn't find the problem either. He mentioned the car looking fine under vacuum and couldn't find any leaks. We also went through all the maps. He went for a ride along and confirmed power was definitely down.lol. they said if I wanted to bring it in Wednesday or Thursday, they will take the bumper off and start looking at the BPV's and everything up front. For 75 an hour, that beats the gas and time to take it to GTM. One thing I did notice was when I floored it and looking at the boost gauge, it would get to the 4-5 psi mark and not move. The was no progressive rise after, it just stopped.

Hotrodz · 04-29-2014, 09:18 AM

Very cool...hopefully they can find the issue quickly and cheaply!!!

Jordo! · 05-01-2014, 12:54 PM

I'm still thinking leaking bypas -- probably not fully closing (I think I incorrectly said sticking open -- but really it's probably not closing all the way, so boost is bypasssing the IM entirely, which I'm guessing is where you measure it (or at the IC?).

SS_Firehawk · 05-01-2014, 03:46 PM

BPV's set to softest setting. How in the blu f@cking horse balls does that happen? No one touched it since I took delivery. Will have more info soon.

Edit: driver side BPV tube was loose as well. They're telling me definitely over 450whp, but not for sure on if it's over 500whp on a mustang Dyno. This is of course using a butt dyno

Edit: car picked up. Oil temps were sitting at 240 and not really dropping. My oil is full, albeit needs a change. My fans were kicked on. Maybe they thoroughly tested it. I'll have to wait till tonight or tomorrow morning to gauge improvement.

Chuck33079 · 05-01-2014, 03:48 PM

Quote:

Originally Posted by SS_Firehawk

BPV's set to softest setting. How in the blu f@cking horse balls does that happen? No one touched it since I took delivery. Will have more info soon.

Can a spring soften up after enough compression cycles and heat cycles? And if it's a bad BPV it's an easy, cheap fix compared to the alternatives.

Mr&Mrs · 05-01-2014, 05:13 PM

So glad this sounds to be a cheap fix and you can enjoy your car again. Chuck I have had BPVs stick but never noticed any significant spring tension loss. Not saying it can't happen but I don't think to this extent this quick.

Jordo! · 05-01-2014, 07:06 PM

BPV's fail all the time, lose tension in the mechanism, stick, lose full range or reliable actuation... I've had it happen twice on my old roots blown Celica, so I got in the habit of always having a spare on hand.

Whistling noises, lost boost, vac leak or slight boost at idle... anything like that is usually traceable back to a bad bypass not actuating properly.

Glad it turned out to be not too big a deal -- good luck on final numbers

Hotrodz · 05-01-2014, 08:02 PM

Outstanding news....glad it was a simple fix. Time to let her run she was meant to!

SS_Firehawk · 05-02-2014, 01:10 PM

So, my butt Dyno says there is an improvement. I'm thinking I need a tune still. When the shop was logging, they were reading 10-10.5AFR, something low. I'm wondering if the ecu adjusted its self, but I haven't seen it get this rich before. I'll do some logging of my own, stupid uprev cable is acting up. I want a replacement. POS. And thanks to everyone helping me go through this automotive hell. I need to update with more pics n vids soon instead of troubleshooting!

octet · 05-08-2014, 08:03 PM

What's new buddy? Any progress with your setup?

SS_Firehawk · 05-09-2014, 03:52 PM

Quote:

Originally Posted by octet

What's new buddy? Any progress with your setup?

Nothing new. Finally got her in a garage after nearly a month outside. It's been he'll keeping her clean. I'm putting more miles on cuz I don't have a DD yet. Hoping to get the RRP in in the next few weeks.

I did fine a brand new magma red Nismo in a Scottsdale dealership... If I had the spare change to pick it up. I thought they would all be gone, it's a small ray of hope lol.

04-23-2014, 07:35 PM	#391 (permalink)
Masterbeatty A True Z Fanatic Join Date: May 2012 Location: Whales Vagina Posts: 4,586 Drives: the speed limit... Rep Power: 122867	I would also leave a nice steaming pile of scat on GTM's door step also because it's probably from break down and reassembly of you're S/C kit. But that's good everything worked out with the A/C compressor getting repaired. SS_Firehawk likes this. __________________ 2011 MB 6MT Masterbeatty journal

04-24-2014, 09:14 PM	#393 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	Sweet...did you ask him about there being a possible vacuum leak? __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

04-29-2014, 08:26 AM	#395 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	Met a guy at the pavilions who has a shop that focuses on Z's and G's. He offered to look at my car for free this past Sunday. I showed up and he was true to his word. Unfortunately they couldn't find the problem either. He mentioned the car looking fine under vacuum and couldn't find any leaks. We also went through all the maps. He went for a ride along and confirmed power was definitely down.lol. they said if I wanted to bring it in Wednesday or Thursday, they will take the bumper off and start looking at the BPV's and everything up front. For 75 an hour, that beats the gas and time to take it to GTM. One thing I did notice was when I floored it and looking at the boost gauge, it would get to the 4-5 psi mark and not move. The was no progressive rise after, it just stopped. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

04-29-2014, 09:18 AM	#396 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	Very cool...hopefully they can find the issue quickly and cheaply!!! __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

05-01-2014, 12:54 PM	#397 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 418	I'm still thinking leaking bypas -- probably not fully closing (I think I incorrectly said sticking open -- but really it's probably not closing all the way, so boost is bypasssing the IM entirely, which I'm guessing is where you measure it (or at the IC?). SS_Firehawk likes this. __________________ Enjoy it. Destroy it.

05-01-2014, 03:46 PM	#398 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	BPV's set to softest setting. How in the blu f@cking horse balls does that happen? No one touched it since I took delivery. Will have more info soon. Edit: driver side BPV tube was loose as well. They're telling me definitely over 450whp, but not for sure on if it's over 500whp on a mustang Dyno. This is of course using a butt dyno Edit: car picked up. Oil temps were sitting at 240 and not really dropping. My oil is full, albeit needs a change. My fans were kicked on. Maybe they thoroughly tested it. I'll have to wait till tonight or tomorrow morning to gauge improvement. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction Last edited by SS_Firehawk; 05-01-2014 at 08:44 PM.

05-01-2014, 05:13 PM	#400 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31940	So glad this sounds to be a cheap fix and you can enjoy your car again. Chuck I have had BPVs stick but never noticed any significant spring tension loss. Not saying it can't happen but I don't think to this extent this quick. SS_Firehawk likes this. __________________ Project Z <--Click - Check out the link too many mods to list!

05-01-2014, 07:06 PM	#401 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 418	BPV's fail all the time, lose tension in the mechanism, stick, lose full range or reliable actuation... I've had it happen twice on my old roots blown Celica, so I got in the habit of always having a spare on hand. Whistling noises, lost boost, vac leak or slight boost at idle... anything like that is usually traceable back to a bad bypass not actuating properly. Glad it turned out to be not too big a deal -- good luck on final numbers SS_Firehawk likes this. __________________ Enjoy it. Destroy it.

05-01-2014, 08:02 PM	#402 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	Outstanding news....glad it was a simple fix. Time to let her run she was meant to! __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

05-02-2014, 01:10 PM	#403 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	So, my butt Dyno says there is an improvement. I'm thinking I need a tune still. When the shop was logging, they were reading 10-10.5AFR, something low. I'm wondering if the ecu adjusted its self, but I haven't seen it get this rich before. I'll do some logging of my own, stupid uprev cable is acting up. I want a replacement. POS. And thanks to everyone helping me go through this automotive hell. I need to update with more pics n vids soon instead of troubleshooting! __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction Last edited by SS_Firehawk; 05-02-2014 at 01:22 PM.

05-08-2014, 08:03 PM	#404 (permalink)
octet Enthusiast Member Join Date: Jul 2013 Location: London, UK Posts: 305 Drives: 2017 Nismo 370z 6MT Rep Power: 3367	What's new buddy? Any progress with your setup?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
theDreamer's Silvia	theDreamer	Other Vehicles	43	03-01-2021 12:40 PM
CAN-bus project	Knio	Audio & Video	10	09-04-2013 08:21 PM
Project X	windex	Movies / Celebrity Gossip / Entertainment / Music	2	03-11-2012 03:16 PM
512 Project - ATX	theDreamer	Texas	20	06-28-2010 10:01 AM
Project Mu	MursePaolo	Brakes & Suspension	4	07-01-2009 03:00 AM