GaleForce's build

jwick · 08-12-2014, 01:14 PM

Quote:

Originally Posted by GaleForce

So far it looks like one 90 degree fitting. I thought buying a "high quality" brand name fitting (Russel Performance) would solve the leaking issue. Nope. I really don't want to drop $25 per fitting until I get a good one.

The car will be going up on jack stands hopefully this afternoon. Looks like I'll be doing an early oil change and swap out the bad fitting, I bought an extra just in case. It's almost like I can see into the future.

I'm going Earl when I replace all the lines with the V1.5 upgrade. They are more expensive but it is what it is.

FYI...I have another small leak, source unknown at the moment. Goes on the lift Friday for inspection and general kit checkup.

Mitco39 · 08-12-2014, 01:24 PM

You guys have been putting to much Alcohol through your engines, it thins the blood! haha

jwick · 08-12-2014, 01:27 PM

Quote:

Originally Posted by Mitco39

You guys have been putting to much Alcohol through your engines, it thins the blood! haha

There's such a thing as too much alcohol

Retract all my previous statements. My BAC is causing all the leaks

GaleForce · 08-13-2014, 12:17 AM

Professional Toronto Photographer Daniel Camer has edited some photos. They look incredible! I will post some up tomorrow.

Cell · 08-13-2014, 01:56 AM

Quote:

Originally Posted by GaleForce

Yep, sucks. Worrying about an oil leak is the last thing I want to do when driving/boosting. I was so pissed last night that the thought of going back to NA crossed my mind.

I am thinking, maybe Sasha should look into using higher quality lines since some of us are having issues with the oil lines.

jwick · 08-13-2014, 07:31 AM

Quote:

Originally Posted by Cell

I am thinking, maybe Sasha should look into using higher quality lines since some of us are having issues with the oil lines.

He already did that. The most recent kits built he used all aeromotive fittings. Those are basically tier one products. We are still having issues.

GaleForce · 08-13-2014, 09:34 AM

Quote:

Originally Posted by jwick

I'm going Earl when I replace all the lines with the V1.5 upgrade. They are more expensive but it is what it is.

FYI...I have another small leak, source unknown at the moment. Goes on the lift Friday for inspection and general kit checkup.

I wanted to try Earl. From what I read Earl and Russell were the go to fittings. I went Russell because they were the only ones available locally. No leak my a$$

jwick · 08-13-2014, 09:40 AM

Quote:

Originally Posted by GaleForce

I wanted to try Earl. From what I read Earl and Russell were the go to fittings. I went Russell because they were the only ones available locally. No leak my a$$

I'm going Earl. I'm also wondering if I should use Earl hose too. It's way more expensive than Russell, like over 50% more. Just trying to justify the additional cost. I can't see that much difference in hose and that's not where my issues have been.

GaleForce · 08-13-2014, 10:10 AM

Quote:

Originally Posted by jwick

I'm going Earl. I'm also wondering if I should use Earl hose too. It's way more expensive than Russell, like over 50% more. Just trying to justify the additional cost. I can't see that much difference in hose and that's not where my issues have been.

I don't know if there is any difference in hose, but from what I was reading, it's not advisable to use the ends from one manufacturer with the hose from another manufacturer. Possibly the hose wall thickness is different, and the fittings compensate for it, but there are no specs, or proof to back that up. I'm calling voodoo on the brand "x" fitting must use brand "x" hose.

jwick · 08-13-2014, 10:15 AM

Quote:

Originally Posted by GaleForce

I don't know if there is any difference in hose, but from what I was reading, it's not advisable to use the ends from one manufacturer with the hose from another manufacturer. Possibly the hose wall thickness is different, and the fittings compensate for it, but there are no specs, or proof to back that up. I'm calling voodoo on the brand "x" fitting must use brand "x" hose.

I'll probably breakdown and buy the Earl hose too.

On a side note. Did I ever send you the pics from my real camera of the a-pillar? I know I took them just I can't recall if I emailed them to you. Alcohol does a number on your brain cells

GaleForce · 08-13-2014, 10:17 AM

Quote:

Originally Posted by jwick

I'll probably breakdown and buy the Earl hose too.

On a side note. Did I ever send you the pics from my real camera of the a-pillar? I know I took them just I can't recall if I emailed them to you. Alcohol does a number on your brain cells

Yes you did send them to me

. I need to post them up somewhere, when I get time. I love the Greddy gauge

I love alcohol too

jwick · 08-13-2014, 10:24 AM

Quote:

Originally Posted by GaleForce

Yes you did send them to me

. I need to post them up somewhere, when I get time. I love the Greddy gauge

I love alcohol too

Just checking. I still need to send you the passenger side pillar so we can make it match the driver but keep forgetting to pull it and ship it. I might just wait until Oct when I pick up the DD. It'll be hard not to tell Johnny to turn up the boost when it no longer is required to get be back and forth to work.

GaleForce · 08-13-2014, 10:27 AM

Quote:

Originally Posted by jwick

Just checking. I still need to send you the passenger side pillar so we can make it match the driver but keep forgetting to pull it and ship it. I might just wait until Oct when I pick up the DD. It'll be hard not to tell Johnny to turn up the boost when it no longer is required to get be back and forth to work.

No rush on the other pillar. That offer is open to you as long as if I can get the dye.

jwick · 08-13-2014, 11:01 AM

Quote:

Originally Posted by GaleForce

No rush on the other pillar. That offer is open to you as long as if I can get the dye.

You da man. I'll make sure to double check dye availability before I mail it and it just randomly shows up on your doorstep

GaleForce · 08-13-2014, 11:00 PM

Russell fitting has been replaced. Test drive with Mrs.Force tomorrow. Hoping for no leaks *fingers crossed*

08-12-2014, 01:24 PM	#2192 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 132	You guys have been putting to much Alcohol through your engines, it thins the blood! haha __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

08-13-2014, 12:17 AM	#2194 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Professional Toronto Photographer Daniel Camer has edited some photos. They look incredible! I will post some up tomorrow. LMBmikeZ, jwick, JARblue and 1 others like this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

08-13-2014, 11:00 PM	#2205 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Russell fitting has been replaced. Test drive with Mrs.Force tomorrow. Hoping for no leaks fingers crossed wheee!, KaienZ34, jwick and 3 others like this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Z Build	pwrhsms	Member's 370Z Gallery	43	09-09-2013 12:35 PM
Possible Nos build	triadz	Forced Induction	7	04-06-2012 11:30 AM
TT build in Fl	travnflorida	Nissan 370Z General Discussions	3	08-15-2011 06:51 PM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD	Reaper42	Forced Induction	14	01-22-2011 06:24 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 01:40 AM