GaleForce's build

GaleForce · 02-21-2013, 08:53 AM

Quote:

Originally Posted by happytheman

Hey man, you need to get those sweet a$$ mods painted!

Ps. Love the fact that you were able to retain enough space for yer shades.

I believe in making things practical, not just to make it. I could have cut a hole in a flat piece of carbon fibre and for the boost controller. That would have been way easier and faster but a waste of space. I like having my shades there.

The body kit was put on the back burner for a while while I get other projects finished for other people. I did notice when I had the front bumper off the car a slight bulge from the lip near the wheel wells that I didn't like. So I sanded the wheel arch down again. Hopefully I'll get some time next week to revisit it, then paint

Quote:

Originally Posted by LMBmikeZ

looking good buddy

Thanks Mike

Quote:

Originally Posted by wheee!

Spray flock FTW

Yes sir.

It's too bad you can't see the flocking once the piece is installed. I'll try to post up a picture of the finished piece outside of the cubby. It looks great.

simota1 · 02-21-2013, 02:24 PM

bro... you know what i love the best about your build thread... your all about the "attention to detail" just like me brotha.. and thats the best part

good job man that cf boost controller holder is lovely

GaleForce · 02-21-2013, 07:58 PM

Quote:

Originally Posted by simota1

bro... you know what i love the best about your build thread... your all about the "attention to detail" just like me brotha.. and thats the best part

good job man that cf boost controller holder is lovely

Thanks Simota! You do have a very clean install going. It hurts to see what you're going through with the stuff from Baker

GaleForce · 02-21-2013, 08:00 PM

Here's a picture of the finished mount. Nice fuzzy suede flocking on top acts as nice protection for my sun glasses and matches the rest of the cubby for the almost factory look.

kenchan · 02-21-2013, 08:04 PM

LMBmikeZ · 02-21-2013, 08:15 PM

you definitely know how to do things right :tup;

GaleForce · 02-21-2013, 08:39 PM

Quote:

Originally Posted by kenchan

Quote:

Originally Posted by LMBmikeZ

you definitely know how to do things right :tup;

Thanks Mike. If I can't do it right I won't do it.

simota1 · 02-21-2013, 08:55 PM

Quote:

Originally Posted by GaleForce

Thanks Simota! You do have a very clean install going. It hurts to see what you're going through with the stuff from Baker

thanks man... ill be sure to do a write up as soon as i can for the wire tuck

i know its something you wanna do also

...

with baker... i just thought i would warn other people so they dont get hit like me....

i gotta watch out for my fellow brothers you know

GaleForce · 02-21-2013, 08:58 PM

Quote:

Originally Posted by simota1

thanks man... ill be sure to do a write up as soon as i can for the wire tuck

i know its something you wanna do also

...

with baker... i just thought i would warn other people so they dont get hit like me....

i gotta watch out for my fellow brothers you know

We appreciate it.

GaleForce · 03-06-2013, 11:20 PM

Finally got back to the rad cover. It was a project that was started a while ago and put on hold. Today I finished it. Just need to install it.

happytheman · 03-06-2013, 11:29 PM

Wait a sec...did you wrap that yourself with real fiber? Oh man, I wantz!!

GaleForce · 03-06-2013, 11:37 PM

Quote:

Originally Posted by happytheman

Wait a sec...did you wrap that yourself with real fiber? Oh man, I wantz!!

Yes sir, I'm a DIY kind of guy

happytheman · 03-06-2013, 11:58 PM

Quote:

Originally Posted by GaleForce

Yes sir, I'm a DIY kind of guy

Oh damn! That looks sooooo sick! Huge thumbs up!

I would love to have one of those. But alas, u will likely purchase one from pwjdm.

GaleForce · 03-07-2013, 12:12 AM

Quote:

Originally Posted by happytheman

Oh damn! That looks sooooo sick! Huge thumbs up!

I would love to have one of those. But alas, u will likely purchase one from pwjdm.

Too many guys have had fittment issues with the PWJDM part, so be prepared for that. You might want to check out the guy on the forum that does carbon wrapping. I think it's Carbon Fibre Element.

O&G · 03-07-2013, 12:51 AM

Badass as usual!!

sent from my Samsung Galaxy Note

02-21-2013, 02:24 PM	#482 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	bro... you know what i love the best about your build thread... your all about the "attention to detail" just like me brotha.. and thats the best part good job man that cf boost controller holder is lovely __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

02-21-2013, 08:00 PM	#484 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Here's a picture of the finished mount. Nice fuzzy suede flocking on top acts as nice protection for my sun glasses and matches the rest of the cubby for the almost factory look. Boost_lee, simota1, XwChriswX and 5 others like this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z Last edited by GaleForce; 06-18-2013 at 07:15 PM.

02-21-2013, 08:15 PM	#486 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10350	you definitely know how to do things right :tup; ZForce and GaleForce like this. __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

03-06-2013, 11:20 PM	#490 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Finally got back to the rad cover. It was a project that was started a while ago and put on hold. Today I finished it. Just need to install it. simota1, ZForce, kenchan and 4 others like this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z Last edited by GaleForce; 03-06-2013 at 11:27 PM.

03-06-2013, 11:29 PM	#491 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	Wait a sec...did you wrap that yourself with real fiber? Oh man, I wantz!! __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

02-21-2013, 08:04 PM	#485 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521

03-07-2013, 12:51 AM	#495 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 42 Posts: 1,212 Drives: 40th Anv. Rep Power: 23	Badass as usual!! sent from my Samsung Galaxy Note GaleForce likes this. __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Z Build	pwrhsms	Member's 370Z Gallery	43	09-09-2013 12:35 PM
Possible Nos build	triadz	Forced Induction	7	04-06-2012 11:30 AM
TT build in Fl	travnflorida	Nissan 370Z General Discussions	3	08-15-2011 06:51 PM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD	Reaper42	Forced Induction	14	01-22-2011 06:24 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 01:40 AM