Nissan 370Z Forum
Page 16 of 238 « First 61415 16 17182666116 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Member's 370Z Gallery (http://www.the370z.com/members-370z-gallery/)
-   -   GaleForce's build (http://www.the370z.com/members-370z-gallery/63084-galeforces-build.html)

Boosted Performance 01-12-2013 05:05 PM
LOL 21*C...how about -21*C. Good thing I have that 75,000btu overhead heater in the shop. I have to wait another 5 months for 21 above zero.

On a side note, if you feel a section of the installation manual could be improved just let me know. I always like to hear how my customers find the instructions. It is hard for me two write the manual, because at times I have a tendancy to assume one already know some things when it comes to a turbo system.

Nut_N_Much 01-12-2013 05:44 PM
Quote:
Originally Posted by Boosted Performance (Post 2107495)
LOL 21*C...how about -21*C. Good thing I have that 75,000btu overhead heater in the shop. I have to wait another 5 months for 21 above zero.
Man you can use my garaged if you need too. :stirthepot: Lots of Tampa folks would love to see you this far south!!! :tiphat:

alcheng 01-12-2013 05:45 PM
Quote:
Originally Posted by GaleForce (Post 2104443)
I got some "me" time in the garage tonight. I had another look at the intercooler piping, loosened everything up, dropped the turbo. After adjusting the pipe, I finally got the piping where I needed it. Now all I had to do was the hard part... getting the turbo to play nice with the silicone coupling... After wrestling with it for a few minutes I had one of these moments,


http://www.youtube.com/watch?v=oyT8WXWq5ok


Success!!!!

http://farm9.staticflickr.com/8087/8...35af7d70_c.jpg
IMG_2591 by J M Gale, on Flickr
Now you are ready to receive some BlowJob... :tup::tup::tup:

blackcherry20 01-12-2013 06:14 PM
Quote:
Originally Posted by GaleForce (Post 2104443)
I got some "me" time in the garage tonight. I had another look at the intercooler piping, loosened everything up, dropped the turbo. After adjusting the pipe, I finally got the piping where I needed it. Now all I had to do was the hard part... getting the turbo to play nice with the silicone coupling... After wrestling with it for a few minutes I had one of these moments,


http://www.youtube.com/watch?v=oyT8WXWq5ok


Success!!!!

http://farm9.staticflickr.com/8087/8...35af7d70_c.jpg
IMG_2591 by J M Gale, on Flickr
:tup: wow! Shiny:tup: i like shiny because i have no idea what all that stuff is:tup::shakes head:
Quote:
Originally Posted by alcheng (Post 2107593)
Now you are ready to receive some BlowJob... :tup::tup::tup:
:eek::icon14: :p

wheee! 01-12-2013 07:21 PM
Well, Al was offering....

GaleForce 01-12-2013 07:49 PM
Quote:
Originally Posted by Boosted Performance (Post 2107495)
LOL 21*C...how about -21*C. Good thing I have that 75,000btu overhead heater in the shop. I have to wait another 5 months for 21 above zero.

On a side note, if you feel a section of the installation manual could be improved just let me know. I always like to hear how my customers find the instructions. It is hard for me two write the manual, because at times I have a tendancy to assume one already know some things when it comes to a turbo system.
I was planning on it. My book is tabbed by section, and I also used tabs of a different colour with suggestions/corrections (I don't have too many). I was just waiting to get the fuel done and double check everything for the 10th time before I PM'd you with my results.

GaleForce 01-12-2013 07:50 PM
Quote:
Originally Posted by wheee! (Post 2107796)
Well, Al was offering....
:ughdance:

( Click to show/hide )
He does have a pretty mouth... :roflpuke2:

alcheng 01-12-2013 08:20 PM
Quote:
Originally Posted by wheee! (Post 2107796)
Well, Al was offering....
sure thing, I can offer him a test drive on the Z... :tup::tup::tup:


Quote:
Originally Posted by GaleForce (Post 2107899)
:ughdance:

( Click to show/hide )
He does have a pretty mouth... :roflpuke2:
:wtf2::wtf2::wtf2:

dang...!!! I'm not gonna eat & drink in front of you anymore...!!!


Quote:
Originally Posted by blackcherry20 (Post 2107641)
:tup: wow! Shiny:tup: i like shiny because i have no idea what all that stuff is:tup::shakes head:

:eek::icon14: :p
That's a blower that blow stuff into some pipes.....


note: Stuff = Air



( Click to show/hide )
ok.. I better stop right now... I feel I am messing up this serious thread of Mr.GaleForce :tiphat:

blackcherry20 01-12-2013 08:28 PM
Yes-we are messing up a legitimate thread-sorry Gale. Back on topic: Galeforce Epic installs!

GaleForce 01-12-2013 10:43 PM
Here how the Berk CBE pipes "meet up" with the turbo y-pipe

http://farm9.staticflickr.com/8227/8...b778abed_c.jpg
IMG_7910 by J M Gale, on Flickr

GaleForce 01-12-2013 10:45 PM
Who says bigger isn't better,

http://farm9.staticflickr.com/8234/8...d32447c2_c.jpg
IMG_7887 by J M Gale, on Flickr

This was in the bottom of my fuel pump assembly. I made sure to clean it out before I reassembled everything,

http://farm9.staticflickr.com/8196/8...a237042a_c.jpg
IMG_7886 by J M Gale, on Flickr

All done, ready to be reinstalled.

http://farm9.staticflickr.com/8493/8...b88b5fe4_c.jpg
IMG_7890 by J M Gale, on Flickr

wheee! 01-12-2013 11:10 PM
Wow. Nice work. Nice pictures too!

GaleForce 01-13-2013 11:27 AM
Some pipe porn for you guys,

http://farm9.staticflickr.com/8091/8...954ba22b_c.jpg
IMG_7865 by J M Gale, on Flickr

http://farm9.staticflickr.com/8072/8...7b8882e8_c.jpg
IMG_7868 by J M Gale, on Flickr

http://farm9.staticflickr.com/8494/8...426dfcb2_c.jpg
IMG_7867 by J M Gale, on Flickr

wheee! 01-13-2013 11:34 AM
I think I see anew manual and photos being made with you and Sasha...! Nice pics buddy!

happytheman 01-13-2013 12:05 PM
Quote:
Originally Posted by GaleForce (Post 2108359)
Here how the Berk CBE pipes "meet up" with the turbo y-pipe

http://farm9.staticflickr.com/8227/8...b778abed_c.jpg
IMG_7910 by J M Gale, on Flickr
How are you resolving this little quandary?


All times are GMT -5. The time now is 07:42 AM.
Page 16 of 238 « First 61415 16 17182666116 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2