top one can see the drop of oil on it

Mines the bottom one. I was thinking the sway bar was making contact.

I'm surprised at the amount of trouble with these. knocking on wood.

No contact 100% sure of that.

I think the sway bar hits the hose not the fitting

Nope, I have mine against the block, also wire tied to the oil pan.

Do you guys know if the threads on the oil filter relocation block are NPT?

I have what you need to buy if you need part number

Yes please. That would save me a bunch of work.

Is it the same as the greddy fittings?

That's what Sasha sent me

Perfect. Thank you :tiphat:

Hopefully I can limp the car to Z-Fest and back home tomorrow. I'll order the parts tonight, receive them next week. :ugh2:

Doesn't look like you are leaking much. I didn't replace those fittings cuz I'm not leaking there

It does't look bad, but it's enough to coat the right underside of the car back to the rear quarter panel. :ugh2: All the other fittings are nice and dry, knock on wood. I'll keep you posted with my results.

For the time being, I put my original hose back on but swapped ends so I could see if the leak moves. I doubt it will but it's one more thing to try.

Thank you for your help Sir :tiphat: