GaleForce's build

O&G · 04-30-2014, 11:49 PM

jwick · 04-30-2014, 11:54 PM

I think I should get a custom one that says I got the baddest G37 in H-town

edconline · 05-01-2014, 02:02 AM

I just can't figure out how Recaro could screw up so royally when they make so many seats for people all the time...

jwick · 05-07-2014, 07:49 AM

Gale, did you ever get the GReddy Thermostat installed? What was the outcome of the small gap on the AN fitting?

I'm still chasing a leak between the AN fitting and the plate. Really starting to get frustrating.

GaleForce · 05-07-2014, 08:59 AM

Quote:

Originally Posted by jwick

Gale, did you ever get the GReddy Thermostat installed? What was the outcome of the small gap on the AN fitting?

I'm still chasing a leak between the AN fitting and the plate. Really starting to get frustrating.

My Z is covered in dust. I have no time for my own projects yet. Soon I hope. I need to jack the car up, rework oil system, and I'm fiddling around with making a rear diffuser...

Can you get a -10an connector to -8an hose fitting? That way you can use the connectors that Greddy supplies.

jwick · 05-07-2014, 09:16 AM

Quote:

Originally Posted by GaleForce

My Z is covered in dust. I have no time for my own projects yet. Soon I hope. I need to jack the car up, rework oil system, and I'm fiddling around with making a rear diffuser...

Can you get a -10an connector to -8an hose fitting? That way you can use the connectors that Greddy supplies.

You can get a -10AN to -8AN adapter. The problem is twofold; one, you are already cramped for space down there and two, Sasha replaced the fittings for me and did not send the ones that originally came with the GReddy.

If I can't find a solution I might be dealing with an oil leak until I get the V1.5 kit from Sasha.

GaleForce · 05-07-2014, 09:30 AM

Quote:

Originally Posted by jwick

You can get a -10AN to -8AN adapter. The problem is twofold; one, you are already cramped for space down there and two, Sasha replaced the fittings for me and did not send the ones that originally came with the GReddy.

If I can't find a solution I might be dealing with an oil leak until I get the V1.5 kit from Sasha.

I'll have to go through your journal and look at your set up again.

What sucks is the amount I spent on fittings and Greddy adaptor would have paid for the 1.5 upgrade.

jwick · 05-07-2014, 09:35 AM

Make it easy on you. As you can see you don't have a lot of room towards the engine. I don't think you could get the -10AN/-8AN adapter in there and still get the fittings on.

GaleForce · 05-07-2014, 09:37 AM

Where exactly is your leak?

jwick · 05-07-2014, 09:39 AM

Quote:

Originally Posted by GaleForce

Where exactly is your leak?

The two fittings that are closest to the engine are the feed and return to the block. The two in the forefront go to the oil cooler. I'm leaking from the left oil cooler fitting. The leak is actually between the plate and the AN fitting, not in the swivel fittings.

GaleForce · 05-07-2014, 09:41 AM

Quote:

Originally Posted by jwick

The two fittings that are closest to the engine are the feed and return to the block. The two in the forefront go to the oil cooler. I'm leaking from the left oil cooler fitting. The leak is actually between the plate and the AN fitting, not in the swivel fittings.

Are you using teflon tape, pipe dope, or ???

jwick · 05-07-2014, 09:45 AM

Quote:

Originally Posted by GaleForce

Are you using teflon tape, pipe dope, or ???

I actually haven't removed the fitting since I received it. I'm waiting to hear back from Sasha on exactly what he did to swap those fittings and if I should go back with teflon or not.

Really getting kind of frustrating that I managed to install an entire turbo kit and all the electrical and the only thing that seems to be wrong is oil leaks that we did nothing to cause.

GaleForce · 05-07-2014, 10:28 AM

Quote:

Originally Posted by jwick

I actually haven't removed the fitting since I received it. I'm waiting to hear back from Sasha on exactly what he did to swap those fittings and if I should go back with teflon or not.

Really getting kind of frustrating that I managed to install an entire turbo kit and all the electrical and the only thing that seems to be wrong is oil leaks that we did nothing to cause.

I had a leaky fitting on the original filter relocator. The fitting had teflon tape installed on it when I received it. I ended up removing the fitting and redoing the teflon tape then everything was a-ok.

jwick · 05-07-2014, 10:29 AM

Might try that at the next oil change. Now that I think of it there probably isn't a lot of oil in that line anyway

GaleForce · 05-08-2014, 09:11 AM

Version 3 of the seats have left Germany, they should be in the hands of the US distributor by Friday. I was told if the order was right, I should have the seats next week.

04-30-2014, 11:49 PM	#1606 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 42 Posts: 1,212 Drives: 40th Anv. Rep Power: 23	jwick and GaleForce like this. __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

04-30-2014, 11:54 PM	#1607 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465057	I think I should get a custom one that says I got the baddest G37 in H-town __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

05-01-2014, 02:02 AM	#1608 (permalink)
edconline Track Member Join Date: Mar 2010 Location: Edmonton Posts: 855 Drives: 10' MB Z34 6MT T/S/N Rep Power: 22	I just can't figure out how Recaro could screw up so royally when they make so many seats for people all the time... __________________ View Journal Audio Build

05-07-2014, 07:49 AM	#1609 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465057	Gale, did you ever get the GReddy Thermostat installed? What was the outcome of the small gap on the AN fitting? I'm still chasing a leak between the AN fitting and the plate. Really starting to get frustrating. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

05-07-2014, 09:35 AM	#1613 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465057	Make it easy on you. As you can see you don't have a lot of room towards the engine. I don't think you could get the -10AN/-8AN adapter in there and still get the fittings on. GaleForce and hughdogz like this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

05-07-2014, 09:37 AM	#1614 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Where exactly is your leak? __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

05-07-2014, 10:29 AM	#1619 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465057	Might try that at the next oil change. Now that I think of it there probably isn't a lot of oil in that line anyway __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

05-08-2014, 09:11 AM	#1620 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Version 3 of the seats have left Germany, they should be in the hands of the US distributor by Friday. I was told if the order was right, I should have the seats next week. O&G and Wiggins3377 like this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Z Build	pwrhsms	Member's 370Z Gallery	43	09-09-2013 12:35 PM
Possible Nos build	triadz	Forced Induction	7	04-06-2012 11:30 AM
TT build in Fl	travnflorida	Nissan 370Z General Discussions	3	08-15-2011 06:51 PM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD	Reaper42	Forced Induction	14	01-22-2011 06:24 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 01:40 AM