This is half of my route today :ugh2: At least I get to do in the Z and shave an hour off the drive time each way :driving:

https://www.google.com/maps/dir/Aust...22!2m1!6e4!3e0

I dropped the harness bar, and a couple other parts, off at the paint shop today. :tup:

Also received a package from Summit Racing today. -an fittings and hose.

Did Sasha give you the AN fitting you needed for the GReddy adapter? One of the ones he replaced is leaking and I need to replace it.

That's a bunch of driving! How many miles on your Z now?

No, I ordered them from Summit.

18mm x 1.5

I'd be interest to see if you have to use a washer to make up any gap. There is one on what Sasha sent me. I'll likely order the same parts if I can't fix the leak on my own.

I'll try threading a fitting on later and let you know.

This many! The trip odometer is what I did today :driving:

:icon14:

https://farm6.staticflickr.com/5176/...0e457c48_c.jpgimage by J M Gale, on Flickr

Looks like I'm going to be busy...

https://farm3.staticflickr.com/2939/...dca7e727_c.jpgimage by J M Gale, on Flickr

https://farm8.staticflickr.com/7111/...dfac2d7e_c.jpgimage by J M Gale, on Flickr

Installed the new strut bar...

https://farm6.staticflickr.com/5549/...503fc894_c.jpgimage by J M Gale, on Flickr

https://farm8.staticflickr.com/7042/...c996abc0_c.jpgimage by J M Gale, on Flickr

Let me know how it goes with the Greddy adapter!

Looks like that fits just fine

There is a very tiny gap, the fitting doesn't fully seat against the housing. I am going to try reusing the rubber o-ring off the gold fittings.