John's Sweet NA build

Navyboy916 · 10-26-2012, 05:43 PM

Maybe 2 hrs and that's a maybe

binary0x01 · 10-26-2012, 06:13 PM

Sweet, that sounds perfect.

Powder370 · 10-01-2013, 01:41 PM

do they have any 1/4 mile tracks in guam? I wounder if we could reverse engineer the trap sped/time and estimate hp numbers..

asdfsammich · 10-26-2012, 06:20 PM

Optimized NA, nice choice. Following the gains on this one will be fun.

Tapatalk & such etc

Navyboy916 · 10-28-2012, 04:51 AM

It looks like my NST pullies will be in tomorrow which means I will be taking them to Nissan to add to my parts lists that needs to be installed. I have place the order with GTM to have the new valve springs and retainers shipped so after those arrive the motor will be reassembled with the new cams. Just giving an update

Navyboy916 · 10-30-2012, 12:07 AM

Another update: I went to Nissan today and saw the engine pulled out of the car on an engine stand. They will be pulling the heads off in order to change the valve springs and retainers.

Navyboy916 · 10-30-2012, 08:24 PM

Just received the NST pulley set. Getting all these parts but still waiting for the valve springs and retainers to get here.

binary0x01 · 10-30-2012, 08:32 PM

Dood if you dyno this and it rocks, I'm gonna go in your footsteps (aside from the pulleys though, too paranoid).

Navyboy916 · 10-31-2012, 05:19 AM

Update: I am shipping my cylinder heads tomorrow to Gtm for a 5 angle valve job and new valve springs and retainers and have my jun cams installed. I should have my heads back on the car in about two to three weeks. My plan just to have the cams installed has gone in a different direction. Since the heads are off I should get all the work done now. The 5 angle valve job should open the heads up even more. It's either GO BIG or GO HOME

Unique_Z · 10-31-2012, 06:50 AM

can't wait for the finished product!

oh, and i voted for exteriors

Dzel · 10-31-2012, 07:38 AM

Quote:

Originally Posted by Iwan72

can't wait for the finished product!

oh, and i voted for exteriors

I'm just kidding, I'm so in to see the dyno numbers. If you don't mind how much $$$ has this cost so far.

Navyboy916 · 10-31-2012, 02:55 PM

Once I get the totals for the jobs being done I will give you a list.

simota1 · 10-31-2012, 05:13 PM

gonna be wild once your done

simota1 · 10-31-2012, 05:14 PM

p.s im jelly you got the NST pulleys ive always wanted those.... and you got red

boo you bro boooo lol j/k

Navyboy916 · 10-31-2012, 05:45 PM

Thanks man sorry to here about ur daily driver. Congrats on the birthday though

View Poll Results: Do u like the engine mods or exterior mods?
Engine	29	78.38%
Exterior	9	24.32%
Multiple Choice Poll. Voters: 37. You may not vote on this poll

10-26-2012, 06:13 PM	#2 (permalink)
binary0x01 Track Member Join Date: Jun 2012 Location: Idaho Posts: 892 Drives: 2012 6-SPEED 3.7L Z Rep Power: 14	Sweet, that sounds perfect. __________________ Tune (by Seb@SpecialtyZ) -- Upgraded Parts List : When in doubt, use brute force; if it doesn't work, you aren't using enough.

10-01-2013, 01:41 PM	#3 (permalink)
Powder370 Base Member Join Date: Jan 2012 Location: Austin Posts: 68 Drives: 10 PW 6MT Rep Power: 14	do they have any 1/4 mile tracks in guam? I wounder if we could reverse engineer the trap sped/time and estimate hp numbers.. __________________ JWT Dual pop chargers with ModShack fang vents M3 Clear Bra

10-28-2012, 04:51 AM	#5 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 14	It looks like my NST pullies will be in tomorrow which means I will be taking them to Nissan to add to my parts lists that needs to be installed. I have place the order with GTM to have the new valve springs and retainers shipped so after those arrive the motor will be reassembled with the new cams. Just giving an update Reaper42 likes this.

10-30-2012, 08:32 PM	#8 (permalink)
binary0x01 Track Member Join Date: Jun 2012 Location: Idaho Posts: 892 Drives: 2012 6-SPEED 3.7L Z Rep Power: 14	Dood if you dyno this and it rocks, I'm gonna go in your footsteps (aside from the pulleys though, too paranoid). __________________ Tune (by Seb@SpecialtyZ) -- Upgraded Parts List : When in doubt, use brute force; if it doesn't work, you aren't using enough.

10-26-2012, 05:43 PM	#1 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 14	Maybe 2 hrs and that's a maybe

10-26-2012, 06:20 PM	#4 (permalink)
asdfsammich Enthusiast Member Join Date: Dec 2011 Location: Southern California Posts: 456 Drives: 09 370Z SR MT Rep Power: 14	Optimized NA, nice choice. Following the gains on this one will be fun. Tapatalk & such etc

10-31-2012, 05:19 AM	#9 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 14	Update: I am shipping my cylinder heads tomorrow to Gtm for a 5 angle valve job and new valve springs and retainers and have my jun cams installed. I should have my heads back on the car in about two to three weeks. My plan just to have the cams installed has gone in a different direction. Since the heads are off I should get all the work done now. The 5 angle valve job should open the heads up even more. It's either GO BIG or GO HOME Unique_Z, GaleForce and binary0x01 like this. Last edited by Navyboy916; 10-31-2012 at 05:23 AM.

10-31-2012, 06:50 AM	#10 (permalink)
Unique_Z A True Z Fanatic Join Date: Dec 2010 Location: Brunei Posts: 1,515 Drives: 370Z, 180SX Rep Power: 18	can't wait for the finished product! oh, and i voted for exteriors __________________ My Z Build UniqueZ

10-31-2012, 02:55 PM	#12 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 14	Once I get the totals for the jobs being done I will give you a list.

10-31-2012, 05:13 PM	#13 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	gonna be wild once your done __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

10-31-2012, 05:14 PM	#14 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	p.s im jelly you got the NST pulleys ive always wanted those.... and you got red boo you bro boooo lol j/k __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

10-31-2012, 05:45 PM	#15 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 14	Thanks man sorry to here about ur daily driver. Congrats on the birthday though

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
John's 335i (Again) - 5/15/10	HKYStormFront	Other Vehicles	24	05-18-2010 04:40 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 12:40 AM
Papa John's To Give Away Free Pizza To Camaro Owners!	AK370Z	The Lounge (Off Topic)	22	08-25-2009 07:29 PM