SPOHN'S Journal II Track Demon Reborn

SPOHN · 01-25-2013, 04:59 PM

Also today I blocked off all the firewall holes.

Megan370z · 01-25-2013, 05:25 PM

Quote:

Originally Posted by wstar

Any details on that? I'm trying to imagine what the connection would be between the two, and drawing a blank. 7AT uses a vacuum line that's connected to the EVAP system running down the body or something? Can't be that, that would be easy to fix.

the 7AT needs a functional EVAP sensor for the proper calculation of the Calculated Load
if you deleted the EVAP setup, the 7AT will always be at 100% calculated load and this will cause an excess unnecessary wear over time.

dont get me wrong , the tranny will work the way its suppose to but with a bit less reliability

----
I just went into my emails with Uprev and this was on one of the last email that we exchanged on that subject.

*COPY/PASTE*
Be careful with the EVAP removal. There is a pressure sensor as part of the EVAP system that is used in calculating barometric pressure and this affects a few different things outside of the EVAP system, like how the car calculates load. I recall seeing issues with a particular Titan which had it's EVAP (including this sensor) removed. I don't remember exactly what fix was done for that particular vehicle(Jared would probably know better), but if your sensor is currently removed, it would probably be better to wire it up just reading atmospheric pressure.

wstar · 01-25-2013, 05:35 PM

I bet I can figure out which sensor that is and just leave one sensor dangling and reading baro pressure. Would be easy to test by monitoring calculated load, which I believe Cipher shows.

Megan370z · 01-25-2013, 05:56 PM

Quote:

Originally Posted by wstar

I bet I can figure out which sensor that is and just leave one sensor dangling and reading baro pressure. Would be easy to test by monitoring calculated load, which I believe Cipher shows.

it should work

just something add a bit more on this...

when I tested the setup, it randowly took a certain amount of time to the tranny ecm to get into safefail.
let it run for a couple mins or even for a few miles then shutdown the car then restart
the ecm should normaly be in safefail.

if its still show normal reading under Load Calculation (25-35% at idle) then you got the right sensor.

Kingbaby · 01-25-2013, 06:06 PM

Quote:

Originally Posted by SPOHN

None of these lines go to the valve cover or the intake. Only the line I capped off goes to the EVAP sensor and then that is connected to the manifold (which could be the intake system). I've removed all of that too. The sensor, vaccum lines (rubber and hard lines), and capped the manifold ports. If you look behind the manifold there is a series of two hard lines. One is vaccum and the other was for the throttle bodies coolant passage in which I deleted that also.

I just haven't got to removing the line capped off cause it routes under the car in all direction and I didn't want to fool with it yet. So far as the line that is filtered I was under the assumption it has to be there for the tank to work proper and vent it's self. Such as for the flapper when filling and for when it's hot it releases pressure in the tank. I see what your saying though about not needing the filter and line would serve the same purpose but by adding a filter (and leaving the line intact) in the location as I did it directs the fumes to the rear of the car where the air will pull them out.

roger roger...thanks again for the nice DIY...

Sh0velMan · 02-05-2013, 04:07 PM

Spohn, did you preserve the steering position sensor?

I ended up shredding the entire assembly trying to follow the horn signal path. It also looked like I couldn't mount the hub without getting rid of that assembly. How did you handle it?

SPOHN · 02-05-2013, 04:32 PM

No I didn't. I don't really need all that. It was simpler not to.

SPOHN · 02-08-2013, 05:28 PM

Can't get my pics to upload but installed a AAM oil pan spacer, AEM oil temp gauge, front and rear tow straps, and removed another 15lbs off the car. 8lbs was off the front of the car.

Mr&Mrs · 02-08-2013, 05:45 PM

Do you have a current weight?

SPOHN · 02-08-2013, 05:49 PM

Not yet guys. I'm curious myself. Next couple weeks for sure.

Baer383 · 02-10-2013, 08:38 PM

Quote:

Originally Posted by Mr&Mrs

Do you have a current weight?

With Chris in it,it is kind of like having the hamburglar in it.

SPOHN · 02-11-2013, 06:50 AM

^ suck my pickles. Lol

Carbon_z · 02-12-2013, 10:41 AM

rofl

SPOHN · 02-13-2013, 07:19 PM

Here's the only pics I have of my AAM oil pan spacer. Sorry not that great, from my Iphone and I was in a rush.

SPOHN · 02-13-2013, 07:40 PM

Installed all new Ralco RZ Performance Short Shifter for our cars. This was given to me by Ralco to perform a full review. So look forward to it Friday night after my track day. Already seems like a solid piece of quality.

01-25-2013, 04:59 PM	#286 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Also today I blocked off all the firewall holes. __________________

01-25-2013, 05:35 PM	#288 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3594	I bet I can figure out which sensor that is and just leave one sensor dangling and reading baro pressure. Would be easy to test by monitoring calculated load, which I believe Cipher shows. __________________ 7AT Track Car! Journal thread / Car setup details

02-05-2013, 04:07 PM	#291 (permalink)
Sh0velMan A True Z Fanatic Join Date: Jan 2012 Location: Dallas/Ft.Worth Posts: 3,349 Drives: Noisily. Rep Power: 20	Spohn, did you preserve the steering position sensor? I ended up shredding the entire assembly trying to follow the horn signal path. It also looked like I couldn't mount the hub without getting rid of that assembly. How did you handle it? __________________ Buy My Car! \| Build Thread

02-05-2013, 04:32 PM	#292 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	No I didn't. I don't really need all that. It was simpler not to. __________________

02-08-2013, 05:28 PM	#293 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Can't get my pics to upload but installed a AAM oil pan spacer, AEM oil temp gauge, front and rear tow straps, and removed another 15lbs off the car. 8lbs was off the front of the car. __________________

02-08-2013, 05:45 PM	#294 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31940	Do you have a current weight? __________________ Project Z <--Click - Check out the link too many mods to list!

02-08-2013, 05:49 PM	#295 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Not yet guys. I'm curious myself. Next couple weeks for sure. __________________

02-11-2013, 06:50 AM	#297 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	^ suck my pickles. Lol __________________

02-12-2013, 10:41 AM	#298 (permalink)
Carbon_z A True Z Fanatic Join Date: Sep 2009 Location: Atlanta, GA Posts: 1,694 Drives: Carbon Fiber 370z Rep Power: 19	rofl __________________ Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at http://www.instagram.com/carbonz.

02-13-2013, 07:19 PM	#299 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Here's the only pics I have of my AAM oil pan spacer. Sorry not that great, from my Iphone and I was in a rush. __________________

02-13-2013, 07:40 PM	#300 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	New Ralco RZ Performance Short Shifter Installed all new Ralco RZ Performance Short Shifter for our cars. This was given to me by Ralco to perform a full review. So look forward to it Friday night after my track day. Already seems like a solid piece of quality. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Spohn's Journal	SPOHN	Member's 370Z Gallery	794	12-04-2012 09:42 AM
Forged Performance: SPOHN's Custom FP Spec 4-Point Cage	ChadB@Forged	Member's 370Z Gallery	24	02-16-2012 07:34 AM
Spohn's First track Day	SPOHN	Track / Autocross / Drifting / Dragstrip	72	09-30-2011 01:04 AM
Getting those demon bolts out..	ggiwin	Intake/Exhaust	11	09-05-2011 02:54 AM
Spohn's Blacked Out Tails (Pics)	SPOHN	Exterior & Interior	33	07-08-2011 11:30 AM