SPOHN'S Journal II Track Demon Reborn

Baer383 · 01-20-2013, 01:35 PM

No problem man any time.

370ZQ · 01-20-2013, 05:23 PM

hey bro, your Z looks sooooooo nice!! i am looking for amuse bumper(rep). do you have any advice where i can get one or any website you trust?
thank you!

SPOHN · 01-20-2013, 05:59 PM

Quote:

Originally Posted by 370ZQ

hey bro, your Z looks sooooooo nice!! i am looking for amuse bumper(rep). do you have any advice where i can get one or any website you trust?
thank you!

Not really sure. I bought mine from a friend.

Baer383 · 01-20-2013, 06:00 PM

Quote:

Originally Posted by SPOHN

Not really sure. I bought mine from a friend.

SPOHN · 01-24-2013, 09:31 PM

Removed EVAP today. Pics to come.

wstar · 01-24-2013, 11:40 PM

Oh I didn't think that was possible without screwing something up about our fuel system. Please do give details

Kingbaby · 01-25-2013, 02:40 AM

Please do!

SPOHN · 01-25-2013, 07:08 AM

It doesn't effect my car. I've done this on my 350Z with no issues. I think the people that had issues is because they didn't vent the proper hoses. They just sealed them all off. I'll try to get pics today. Mostly you want to put a small crank case breather filter (from K&N) on the hose that goes to the gas tank. Other than that the system works the exact same in the EVAP was installed. The EVAP is a simple air/ fume filter. All I have done is removed it and the system still operates the same.

DIY: EVAP Removal

Megan370z · 01-25-2013, 12:13 PM

Quote:

Originally Posted by SPOHN

It doesn't effect my car. I've done this on my 350Z with no issues. I think the people that had issues is because they didn't vent the proper hoses. DIY: EVAP Removal

a BIG note on this .

7AT owner should NOT do this ,
The 7AT/ECU require the EVAP setup to function properly, it might sound weird but it does and you will break the tranny over time

even if you have Uprev, 7AT owner must keep the sensors/EVAP in place.
I had a big talk on this subject about 2-3 years ago with Jared @ Uprev, when I did this Mod.

sig11 · 01-25-2013, 12:34 PM

Might want to post that in the DIY thread.

SPOHN · 01-25-2013, 12:52 PM

Quote:

Originally Posted by Megan370z

a BIG note on this .

7AT owner should NOT do this ,
The 7AT/ECU require the EVAP setup to function properly, it might sound weird but it does and you will break the tranny over time

even if you have Uprev, 7AT owner must keep the sensors/EVAP in place.
I had a big talk on this subject about 2-3 years ago with Jared @ Uprev, when I did this Mod.

Glad you brought that up. I vaguely remember reading that.

SPOHN · 01-25-2013, 02:48 PM

K&N Filter goes to gas tank line

Capped off line goes to the front of the car to manifold.

wstar · 01-25-2013, 03:50 PM

Quote:

Originally Posted by Megan370z

a BIG note on this .

7AT owner should NOT do this ,
The 7AT/ECU require the EVAP setup to function properly, it might sound weird but it does and you will break the tranny over time

even if you have Uprev, 7AT owner must keep the sensors/EVAP in place.
I had a big talk on this subject about 2-3 years ago with Jared @ Uprev, when I did this Mod.

Any details on that? I'm trying to imagine what the connection would be between the two, and drawing a blank. 7AT uses a vacuum line that's connected to the EVAP system running down the body or something? Can't be that, that would be easy to fix.

Kingbaby · 01-25-2013, 03:52 PM

Awesome... Have you removed the breather lines that connect the intake and that go to the valve cover?

Because the two you capped and added a filter to I believe can be completely removed!

SPOHN · 01-25-2013, 04:28 PM

Quote:

Originally Posted by Kingbaby

Awesome... Have you removed the breather lines that connect the intake and that go to the valve cover?

Because the two you capped and added a filter to I believe can be completely removed!

None of these lines go to the valve cover or the intake. Only the line I capped off goes to the EVAP sensor and then that is connected to the manifold (which could be the intake system). I've removed all of that too. The sensor, vaccum lines (rubber and hard lines), and capped the manifold ports. If you look behind the manifold there is a series of two hard lines. One is vaccum and the other was for the throttle bodies coolant passage in which I deleted that also.

I just haven't got to removing the line capped off cause it routes under the car in all direction and I didn't want to fool with it yet. So far as the line that is filtered I was under the assumption it has to be there for the tank to work proper and vent it's self. Such as for the flapper when filling and for when it's hot it releases pressure in the tank. I see what your saying though about not needing the filter and line would serve the same purpose but by adding a filter (and leaving the line intact) in the location as I did it directs the fumes to the rear of the car where the air will pull them out.

01-20-2013, 01:35 PM	#271 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 30	No problem man any time. __________________ 2013 ZL1 754 rwhp 747 rwtq Last edited by Baer383; 01-20-2013 at 01:39 PM.

01-24-2013, 09:31 PM	#275 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Removed EVAP today. Pics to come. __________________

01-24-2013, 11:40 PM	#276 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3594	Oh I didn't think that was possible without screwing something up about our fuel system. Please do give details __________________ 7AT Track Car! Journal thread / Car setup details

01-25-2013, 07:08 AM	#278 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	It doesn't effect my car. I've done this on my 350Z with no issues. I think the people that had issues is because they didn't vent the proper hoses. They just sealed them all off. I'll try to get pics today. Mostly you want to put a small crank case breather filter (from K&N) on the hose that goes to the gas tank. Other than that the system works the exact same in the EVAP was installed. The EVAP is a simple air/ fume filter. All I have done is removed it and the system still operates the same. DIY: EVAP Removal __________________

01-25-2013, 02:48 PM	#282 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	K&N Filter goes to gas tank line Capped off line goes to the front of the car to manifold. __________________

01-20-2013, 05:23 PM	#272 (permalink)
370ZQ Base Member Join Date: Jul 2012 Location: Michigan Posts: 34 Drives: Nissan 370z-BLK-AT Rep Power: 13	hey bro, your Z looks sooooooo nice!! i am looking for amuse bumper(rep). do you have any advice where i can get one or any website you trust? thank you!

01-25-2013, 12:34 PM	#280 (permalink)
sig11 A True Z Fanatic Join Date: Jun 2009 Location: Detroit Posts: 1,294 Drives: 09 370Z Red Sport-MT Rep Power: 18	Might want to post that in the DIY thread.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Spohn's Journal	SPOHN	Member's 370Z Gallery	794	12-04-2012 09:42 AM
Forged Performance: SPOHN's Custom FP Spec 4-Point Cage	ChadB@Forged	Member's 370Z Gallery	24	02-16-2012 07:34 AM
Spohn's First track Day	SPOHN	Track / Autocross / Drifting / Dragstrip	72	09-30-2011 01:04 AM
Getting those demon bolts out..	ggiwin	Intake/Exhaust	11	09-05-2011 02:54 AM
Spohn's Blacked Out Tails (Pics)	SPOHN	Exterior & Interior	33	07-08-2011 11:30 AM