SPOHN'S Journal II Track Demon Reborn

SPOHN · 11-23-2012, 06:37 PM

Quote:

Originally Posted by MJB

SPOHN, looking at your mod list it doesn't look like you have aftermarket clutch/flywheel? Any plans in the future to upgrade?

First of the year

SPOHN · 11-23-2012, 07:18 PM

Finished up installing my CSF radiator today and fired her up for the first time in weeks. Boy the new headers sound great. Real mean. I love it. Man my car pulls harder now. It's amazing. Can't wait to get it tuned. Plus with the weight removed from the AC and stock manifolds which is 30+ lbs.

Also notice in the pics below how I removed all the hood latching, panels, and cables reducing a OK amount of weight (about 5lbs). I will be removing the middle section I left for I needed it to stay until I make a custom bracket to brace the upper portion of my oil cooler. I installed AeroCatch hood pins to hold hood. I'll post pics of those tomorrow. Ran out of day light.

New Z1 Radiator Hoses

HKYStormFront · 11-23-2012, 09:04 PM

nice!

MJB · 11-24-2012, 09:12 AM

Man, with that new radiator, oil cooler and vented hood I bet you never see high temps at the track!

Dustin@Z1 · 11-24-2012, 09:29 AM

Put the cover panels back on or fab one up. Not having that panel will actually hinder your engine's cooling ability, unless you plan on building a custom radiator duct from the Stillen fascia's opening to the radiator.

MJB · 11-24-2012, 09:38 AM

Quote:

Originally Posted by Dustin@Z1

Put the cover panels back on or fab one up. Not having that panel will actually hinder your engine's cooling ability, unless you plan on building a custom radiator duct from the Stillen fascia's opening to the radiator.

Oh really. So that shrouds directs all the air to the radiator then instead of it going to the engine bay?

Dustin@Z1 · 11-24-2012, 09:56 AM

Quote:

Originally Posted by MJB

Oh really. So that shrouds directs all the air to the radiator then instead of it going to the engine bay?

Correct. Without that panel air will basically hit the front of the radiator and circulate around core as opposed to being channeled through it. That is why there are plastic finisher panels on the sides of the core support that extend to the fascia as well.

Without these panels air pressure will fill up the fender wells or engine bay without passing through the radiator.

SPOHN · 11-24-2012, 11:13 AM

Why is it some of the race teams dont run them nor did they have any other form of directing air? I'll keep a eye on things.

Dustin@Z1 · 11-24-2012, 11:17 AM

Brian Kleeman uses a stock one that has been sealed up with tape. SFR Enterprises has built sheet metal replacements that are completely sealed off along with custom made sheet metal ducting.

I am not sure about Doran's RC. It may have full ducting. But I know for a fact that it still retains that panel.

SPOHN · 11-24-2012, 11:30 AM

Do you have pics of Brains setup? New prodject. Yes!!

MJB · 11-24-2012, 12:09 PM

Quote:

Originally Posted by SPOHN

Do you have pics of Brains setup? New prodject. Yes!!

I've been wanting to design a shroud to direct air up towards my G3's. I guess with the Stillen fascia you don't have to worry about that.

SPOHN · 11-24-2012, 12:25 PM

I've already came up with a shroud that's going to work perfect IMO. I love this sh!t.

SPOHN · 11-24-2012, 05:44 PM

Installed hood pins. What better way to rid weight than removing all the stock panels, three hood latches, and cables.

370Z JT · 11-24-2012, 05:56 PM

Hey were you running stock headers before the momentums?

SPOHN · 11-24-2012, 05:57 PM

Yes I was.

11-23-2012, 07:18 PM	#107 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Finished up installing my CSF radiator today and fired her up for the first time in weeks. Boy the new headers sound great. Real mean. I love it. Man my car pulls harder now. It's amazing. Can't wait to get it tuned. Plus with the weight removed from the AC and stock manifolds which is 30+ lbs. Also notice in the pics below how I removed all the hood latching, panels, and cables reducing a OK amount of weight (about 5lbs). I will be removing the middle section I left for I needed it to stay until I make a custom bracket to brace the upper portion of my oil cooler. I installed AeroCatch hood pins to hold hood. I'll post pics of those tomorrow. Ran out of day light. New Z1 Radiator Hoses __________________ Last edited by SPOHN; 11-23-2012 at 07:23 PM.

11-23-2012, 09:04 PM	#108 (permalink)
HKYStormFront A True Z Fanatic Join Date: Apr 2009 Location: Greer, SC Posts: 14,954 Drives: 06 Frontier SE 6spd Rep Power: 52	nice! __________________ Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

11-24-2012, 09:12 AM	#109 (permalink)
MJB A True Z Fanatic Join Date: Aug 2011 Location: Tacoma, WA Age: 41 Posts: 1,498 Drives: a POS truck Rep Power: 496	Man, with that new radiator, oil cooler and vented hood I bet you never see high temps at the track! __________________ 09 Nismo #0483 sold. Viper or C7 next time around.

11-24-2012, 11:13 AM	#113 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Why is it some of the race teams dont run them nor did they have any other form of directing air? I'll keep a eye on things. __________________

11-24-2012, 11:30 AM	#115 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Do you have pics of Brains setup? New prodject. Yes!! __________________

11-24-2012, 09:29 AM	#110 (permalink)
Dustin@Z1 The370Z.com Sponsor Join Date: Jun 2009 Location: NLA Posts: 1,313 Drives: NLA Rep Power: 18	Put the cover panels back on or fab one up. Not having that panel will actually hinder your engine's cooling ability, unless you plan on building a custom radiator duct from the Stillen fascia's opening to the radiator.

11-24-2012, 11:17 AM	#114 (permalink)
Dustin@Z1 The370Z.com Sponsor Join Date: Jun 2009 Location: NLA Posts: 1,313 Drives: NLA Rep Power: 18	Brian Kleeman uses a stock one that has been sealed up with tape. SFR Enterprises has built sheet metal replacements that are completely sealed off along with custom made sheet metal ducting. I am not sure about Doran's RC. It may have full ducting. But I know for a fact that it still retains that panel.

11-24-2012, 12:25 PM	#117 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	I've already came up with a shroud that's going to work perfect IMO. I love this sh!t. __________________

11-24-2012, 05:44 PM	#118 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Aero Catch Hood Pins Installed hood pins. What better way to rid weight than removing all the stock panels, three hood latches, and cables. __________________

11-24-2012, 05:56 PM	#119 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	Hey were you running stock headers before the momentums? __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

11-24-2012, 05:57 PM	#120 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Yes I was. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Spohn's Journal	SPOHN	Member's 370Z Gallery	794	12-04-2012 09:42 AM
Forged Performance: SPOHN's Custom FP Spec 4-Point Cage	ChadB@Forged	Member's 370Z Gallery	24	02-16-2012 07:34 AM
Spohn's First track Day	SPOHN	Track / Autocross / Drifting / Dragstrip	72	09-30-2011 01:04 AM
Getting those demon bolts out..	ggiwin	Intake/Exhaust	11	09-05-2011 02:54 AM
Spohn's Blacked Out Tails (Pics)	SPOHN	Exterior & Interior	33	07-08-2011 11:30 AM