Nut_N_Much Journal

Nut_N_Much · 10-13-2013, 06:12 PM

Got my rims and tires back today.. Also helped out Kelly prime his cooling system. Herd a knocking sound on the way over to his house and found that the sway bar connecting bolts were gone. The thing was just bouncing on the frame supports. Thats what I get for taking it to an alignment shop. Don't understand why they would need to remove the sway mounts. I got SPC adjustable camber arms and toe bolts.

Thank god the bushings and brackets are still there, just need 3 new bolts.

Lunar-Eclipse · 10-13-2013, 08:48 PM

Quote:

Originally Posted by Nut_N_Much

You got a crazy lookin toe

. Look like hobbit toe's

That was the most random comment. I really did laugh out loud.

Nut_N_Much · 10-14-2013, 12:29 PM

Little DIY for ya... My Sway Bolts were stolen by gremlins so I went to LOWES and got the bolts I needed. Also saw some grease fittings so I bought a few.

I drilled a hole in each bracket and tapped the hole to match the threads and pitch of the grease fitting. When I get under the car I'll make a small grove on the polyurethane bushing to allow the grease to disperse evenly under the bracket.

Started working on the Hood, should have the radius's cut today..Will update tonight.

Nothing new, I sure its been don before on the forum. Just thought it mad sense to do. Cut down on wearing out bushings for all you AutoX guy's.

Nut_N_Much · 10-14-2013, 06:07 PM

Got the hood cut today. Kelly wanted a 3rd vent down low. I had a bad feeling about this but Its been done. Funny thing is once you cut there is no going back so I made it work.

I think some cross sections will need welded in to sturdy up the hood for high speeds.

Nut_N_Much · 10-17-2013, 12:58 PM

Found out today that my Tune is corrupt! There are two MAPS on the tune one for Cold one for Hot. At 75 or 80 degree's the ECM switches from the cold map to the hot. For some reason my tune isn't allowing my car to switch over. This is causing my engine to starve (Feels like missing or bad plugs). Good thing is Martin is re-writing the MAP and will Dyno Tune it tomorrow free of charge.

Free was the only word I herd while he was discussing the issue with me

. Will take a video and post numbers tomorrow.

. Just in time for Z Fest Sat.

LostSol · 10-17-2013, 01:00 PM

Hey Joe, can you PM me the place you trust to tune your car? I need to get uprev and get tuned and am looking for a good place.

Nut_N_Much · 10-20-2013, 01:04 PM

Not place but person... Martin, he is the UpRev rep for this region and an excellent tuner. Just got done with Faya's car Friday.. He works out of multiple shops, they contact him for Nissan Tunes.

He may Dyno you out of Fever Racing off DaleMabry and Clarke Ave, just remember that the Tuning is separate from the shop. You will see what I mean when you go there

813-817-5601 tell him Joe Fortune sent you, thats his Cell..

Nut_N_Much · 10-20-2013, 01:07 PM

Trying to get a set of these made for me. Lenso will start carrying after X-Mas, working to get them to offer in our offsets, no spacers needed.. Hope it works out, would like to go back to 19's

Nut_N_Much · 01-04-2015, 03:00 PM

DIY: Triple Gauge Cluster

Followed the DIY posted above and got the gauges in and working..

Wiring diagram that came with gauges. Running Oil Temp, Oil Pressure, Water Temp, Boost, Volt, Trans Temp.

This was what the DIY said the stock wiring was:

Stock plug on dash:

Need to trim some more to get the hose clamp as far back as you can get it. This does 2 things for you. Allows the clamp to mount flat, also allows the worm screw to sit just behind the dash pad when you insert it to the dash.

Face..

All good, all works, i just need a few adapters to add to the lines for the sensors.

Zoren 370 · 01-04-2015, 05:13 PM

Nice to see you working on the Z again Joe!

Good times roll...Happy New Year!

Nut_N_Much · 01-04-2015, 05:56 PM

Quote:

Originally Posted by Zoren 370

Nice to see you working on the Z again Joe!

Good times roll...Happy New Year!

Thanks bud, I got the engine i needed. Should be swapping it out soon.

Happy New Years to you bud!!! Hope Christmas was good in Jax...

Zoren 370 · 01-04-2015, 07:27 PM

Thats Great Joe, looking forward to see Sophie back into action again.

DatsunFTW · 01-04-2015, 08:35 PM

Quote:

Originally Posted by Nut_N_Much

Thanks bud, I got the engine i needed. Should be swapping it out soon.

Happy New Years to you bud!!! Hope Christmas was good in Jax...

Congrats! I'm glad it worked out for you

We'll be finally be seeing more of you around

Nut_N_Much · 01-04-2015, 09:16 PM

Quote:

Originally Posted by DatsunFTW

Congrats! I'm glad it worked out for you

We'll be finally be seeing more of you around

Ya, i have a few things to do. Been shopping around for paint shop. I have CF Zele kit and fenders that need painted. Will swap motor first.

Man the cars are addicting. I just caught myself drooling over the TT from FI. What a sexy kit.

Well motor swap and kit painted, ill be back at it again. Been doing 2 sets of lights for some local cars going to SEMA. I need to get them out of the garage so i can play.

See you soon.

Nut_N_Much · 01-24-2015, 11:29 AM

Nice..

10-14-2013, 12:29 PM	#393 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 26	Little DIY for ya... My Sway Bolts were stolen by gremlins so I went to LOWES and got the bolts I needed. Also saw some grease fittings so I bought a few. I drilled a hole in each bracket and tapped the hole to match the threads and pitch of the grease fitting. When I get under the car I'll make a small grove on the polyurethane bushing to allow the grease to disperse evenly under the bracket. Started working on the Hood, should have the radius's cut today..Will update tonight. Nothing new, I sure its been don before on the forum. Just thought it mad sense to do. Cut down on wearing out bushings for all you AutoX guy's. GaleForce likes this. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

10-17-2013, 12:58 PM	#395 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 26	Found out today that my Tune is corrupt! There are two MAPS on the tune one for Cold one for Hot. At 75 or 80 degree's the ECM switches from the cold map to the hot. For some reason my tune isn't allowing my car to switch over. This is causing my engine to starve (Feels like missing or bad plugs). Good thing is Martin is re-writing the MAP and will Dyno Tune it tomorrow free of charge. Free was the only word I herd while he was discussing the issue with me. Will take a video and post numbers tomorrow. . Just in time for Z Fest Sat. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

10-17-2013, 01:00 PM	#396 (permalink)
LostSol Premium Member Join Date: Jan 2013 Location: Orlando Posts: 1,021 Drives: 2010 370z 40th A.E. Rep Power: 15	Hey Joe, can you PM me the place you trust to tune your car? I need to get uprev and get tuned and am looking for a good place. Nut_N_Much likes this. __________________ 2010 Nissan 370Z 40th Anniversary Edition #762/1000 \| Forgestar \| Michelin \| Swift \| TRS \| Z Speed \| ARK \| Z1 \| Hawk \| CFE \| Evo-R \| GTMat \| Stillen \| Seibon \| Whiteline \| Pioneer \|

10-20-2013, 01:04 PM	#397 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 26	Not place but person... Martin, he is the UpRev rep for this region and an excellent tuner. Just got done with Faya's car Friday.. He works out of multiple shops, they contact him for Nissan Tunes. He may Dyno you out of Fever Racing off DaleMabry and Clarke Ave, just remember that the Tuning is separate from the shop. You will see what I mean when you go there 813-817-5601 tell him Joe Fortune sent you, thats his Cell.. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

10-20-2013, 01:07 PM	#398 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 26	Trying to get a set of these made for me. Lenso will start carrying after X-Mas, working to get them to offer in our offsets, no spacers needed.. Hope it works out, would like to go back to 19's simota1 and kellyefields like this. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

01-04-2015, 03:00 PM	#399 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 26	DIY: Triple Gauge Cluster Followed the DIY posted above and got the gauges in and working.. Wiring diagram that came with gauges. Running Oil Temp, Oil Pressure, Water Temp, Boost, Volt, Trans Temp. This was what the DIY said the stock wiring was: Stock plug on dash: Need to trim some more to get the hose clamp as far back as you can get it. This does 2 things for you. Allows the clamp to mount flat, also allows the worm screw to sit just behind the dash pad when you insert it to the dash. Face.. All good, all works, i just need a few adapters to add to the lines for the sensors. GaleForce and xxAGAVExx like this. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

01-04-2015, 05:13 PM	#400 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913653	Nice to see you working on the Z again Joe! Good times roll...Happy New Year! Nut_N_Much likes this.

01-04-2015, 07:27 PM	#402 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913653	Thats Great Joe, looking forward to see Sophie back into action again. Nut_N_Much and chpt11 like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
O&G's Journal	O&G	Member's 370Z Gallery	648	02-16-2017 04:30 PM
PG6Speeds Journal	pg6speed	Member's 370Z Gallery	19	12-21-2011 11:21 PM
Cmike2780's Journal	Cmike2780	Member's 370Z Gallery	9	06-30-2011 12:17 AM
tag journal with car color	bflosabre91	The370Z.com Feedback, Suggestions & Questions	1	05-12-2011 01:46 PM
Z BEST Journal	Z BEST	Member's 370Z Gallery	26	01-09-2011 04:19 PM