Nut_N_Much Journal

Zoren 370 · 01-04-2015, 04:13 PM

Nice to see you working on the Z again Joe!

Good times roll...Happy New Year!

DatsunFTW · 01-29-2015, 11:45 PM

So aweZome! I can't wait to see the progress my friend. If you still have that 34 row core, I might just snatch it up from you sometime

Nut_N_Much · 01-31-2015, 06:07 PM

New Beginnings

List of build items:
CJM Fuel Return
1.5 Super Charger
NST Pulley Set
K3 Project Rims
Z1 spacers 10mm front/15mm rear set tires inside fender
Modified harness bar/tied into rear Apillers and rear shock towers
Carbon Signal Vented Fenders
Zele CF Boddy Kit / Not full cf
New / Used motor 20,000 miles. better than 70,000
Z1 trans mount
Z1 Motor Mounts
White line Dif Bushings
Arc Grip Exhaust
Custom Tune at Motion Lab

Already on car:
34 row oil cooler
19 row trans cooler
Oil catch cans
Vented Rotors
Trans Tune from ZFever
Tien Sport Springs
CNT Exhaust
White line sways F/R
Jamaica AT shift knob with wife name on it
Boston Acoustics Sound System with P3 for bass
Morgen rear stabilizer bar
Arc Resonated test pipes
TMaxx Sound deadening
Boost gauge, ARF gauge, oil temp, water temp
Varis Vented Hood
Full Carbon Fiber Duck Bill Spoiler
Lenso 20x9/20x10 rims
Grounding Kit
Crapy cold air intake

Redline Desgin Sticker good for 20+ HP

Zoren 370 · 01-31-2015, 06:42 PM

Quote:

Originally Posted by Nut_N_Much

New Beginnings

List of build items:
CJM Fuel Return
1.5 Super Charger
NST Pulley Set
K3 Project Rims
Z1 spacers 10mm front/15mm rear set tires inside fender
Modified harness bar/tied into rear Apillers and rear shock towers
Carbon Signal Vented Fenders
Zele CF Boddy Kit / Not full cf
New / Used motor 20,000 miles. better than 70,000
Z1 trans mount
Z1 Motor Mounts
White line Dif Bushings
Arc Grip Exhaust
Custom Tune at Motion Lab

Already on car:
34 row oil cooler
19 row trans cooler
Oil catch cans
Vented Rotors
Trans Tune from ZFever
Tien Sport Springs
CNT Exhaust
White line sways F/R
Jamaica AT shift knob with wife name on it
Boston Acoustics Sound System with P3 for bass
Morgen rear stabilizer bar
Arc Resonated test pipes
TMaxx Sound deadening
Boost gauge, ARF gauge, oil temp, water temp
Varis Vented Hood
Full Carbon Fiber Duck Bill Spoiler
Lenso 20x9/20x10 rims
Grounding Kit
Crapy cold air intake

Redline Desgin Sticker good for 20+ HP

What is that^
I think I do have that on my Z now.

Zoren 370 · 01-31-2015, 06:54 PM

This would be a nice color wrap if ur looking..i vote for flat or matte gray is very nice.

image.jpg

Nut_N_Much · 02-09-2015, 04:09 PM

I got 2 boxes today. Vented fender liner and the Complete SC Kit. So happy.
Wish i could do the single turbo on Sophie but Sosha will not make one. He is buried MT kits.

I would do VSR kit in a heartbeat if it wasn't for the shadiness. Javier sold his Red 370 and got an STI. Really nice car, paid a lot for it. Bobby sold him on a motor and turbo kit. Well he got his car back after 3 months which isn't that bad and drove the car for a week. Pop, the motor goes driving 45mph to his work.

Midnightblue just got his car back from Bobby, they made a video for him. The car looks amazing and sounds awesome with the single exhaust. Javier's car is still sitting there and shows up in the video. Been there since before Christmas. If people only new about the guy's that have had parts taken off there cars and substituted for something else while having work done.

I checked on Glockworks car 4 times while he got his kit installed. The car was covered in dirt with windows down. When he got it back it was cleaned and buffed out so they took care of him.

I'm torn, i just hope our Z people have a good experience and don't run into any problems with the kit. Only company with single turbo for 7AT version Z's.

COSMO seems to like them.

It's a cool kit, but the place and it's history isn't good.

DatsunFTW · 01-31-2015, 06:11 PM

Super excited for the progress

xxAGAVExx · 03-01-2015, 08:05 AM

Nice, what diff u get? Like the pic, that movie was just on the other night.

Sent from my iPhone using Tapatalk

Nut_N_Much · 03-01-2015, 01:09 PM

I have 80,000 miles on my car. It was time to swap out the Diff Bushings. I used Whiteline Kit. Doing DIY, found some stuff that i have not read on other DIY's figured it could help some one out.

Still Stock LSD

Nut_N_Much · 03-01-2015, 02:33 PM

Done

Took awhile..

DIY: Whiteline Diff Bushings (Made Easy)

Made a press tool. Did it with stuff i had laying around. Literally took 5 min to get bushing in and 10 to get diff bolted up. Axles and drive shaft took a little longer. Bad back, crawling in and out from under the car sucks a$$.

Nut_N_Much · 03-04-2015, 07:25 PM

https://www.youtube.com/watch?v=B7P4nJzD-4s

2015 GTR is awesome.

Nut_N_Much · 03-05-2015, 08:25 PM

cptr11 do you live in Apollo Beach Area?

chpt11 · 03-06-2015, 10:41 AM

Yup, Big Bend and 301 area

Limeybastard · 03-09-2015, 11:31 AM

Lovely journal, fully enjoyed reading and viewing the pics.

Unique_Z · 03-09-2015, 01:24 PM

Hi

Thomas told me you're having trouble with your offset. Anyway, the last pic you posted is my Z. The fronts is actually +18 and i fitted a 20mm spacer to make it -2. I got the cambers set at -3.8ish to get it look tucked. Hope that helps

Karl (owner of K3projekt) doesn't really know much bout 370Z's offset. I calculated them by my own before ordering it.

01-29-2015, 11:45 PM	#2 (permalink)
DatsunFTW A True Z Fanatic Join Date: Apr 2013 Location: Gainesville, FL Posts: 1,234 Drives: 12 370z A54 M6 Rep Power: 380	So aweZome! I can't wait to see the progress my friend. If you still have that 34 row core, I might just snatch it up from you sometime __________________ The Build

02-09-2015, 04:09 PM	#6 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 27	I got 2 boxes today. Vented fender liner and the Complete SC Kit. So happy. Wish i could do the single turbo on Sophie but Sosha will not make one. He is buried MT kits. I would do VSR kit in a heartbeat if it wasn't for the shadiness. Javier sold his Red 370 and got an STI. Really nice car, paid a lot for it. Bobby sold him on a motor and turbo kit. Well he got his car back after 3 months which isn't that bad and drove the car for a week. Pop, the motor goes driving 45mph to his work. Midnightblue just got his car back from Bobby, they made a video for him. The car looks amazing and sounds awesome with the single exhaust. Javier's car is still sitting there and shows up in the video. Been there since before Christmas. If people only new about the guy's that have had parts taken off there cars and substituted for something else while having work done. I checked on Glockworks car 4 times while he got his kit installed. The car was covered in dirt with windows down. When he got it back it was cleaned and buffed out so they took care of him. I'm torn, i just hope our Z people have a good experience and don't run into any problems with the kit. Only company with single turbo for 7AT version Z's. COSMO seems to like them. It's a cool kit, but the place and it's history isn't good. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

01-31-2015, 06:11 PM	#7 (permalink)
DatsunFTW A True Z Fanatic Join Date: Apr 2013 Location: Gainesville, FL Posts: 1,234 Drives: 12 370z A54 M6 Rep Power: 380	Super excited for the progress __________________ The Build

03-01-2015, 08:05 AM	#8 (permalink)
xxAGAVExx A True Z Fanatic Join Date: Nov 2012 Location: Tampa Posts: 1,037 Drives: 09 370Z BLK M6 Rep Power: 53925	Nice, what diff u get? Like the pic, that movie was just on the other night. Sent from my iPhone using Tapatalk __________________ l 09/6MT l BP Twin Turbo Kit l E-85 w/Fuel Return l FI 18" Res CF CBE l Powertrix Ultra-Lite Coilovers l Wavetrac LSD \| Lots of SPL and Carbon Fiber \|

03-01-2015, 01:09 PM	#9 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 27	I have 80,000 miles on my car. It was time to swap out the Diff Bushings. I used Whiteline Kit. Doing DIY, found some stuff that i have not read on other DIY's figured it could help some one out. Still Stock LSD __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

01-04-2015, 04:13 PM	#1 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913654	Nice to see you working on the Z again Joe! Good times roll...Happy New Year!

01-31-2015, 06:54 PM	#5 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913654	This would be a nice color wrap if ur looking..i vote for flat or matte gray is very nice. image.jpg

03-01-2015, 02:33 PM	#10 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 27	Done Took awhile.. DIY: Whiteline Diff Bushings (Made Easy) Made a press tool. Did it with stuff i had laying around. Literally took 5 min to get bushing in and 10 to get diff bolted up. Axles and drive shaft took a little longer. Bad back, crawling in and out from under the car sucks a$$. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html Last edited by Nut_N_Much; 03-01-2015 at 02:36 PM.

03-04-2015, 07:25 PM	#11 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 27	https://www.youtube.com/watch?v=B7P4nJzD-4s 2015 GTR is awesome.

03-05-2015, 08:25 PM	#12 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 27	cptr11 do you live in Apollo Beach Area? __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

03-06-2015, 10:41 AM	#13 (permalink)
chpt11 Enthusiast Member Join Date: Dec 2012 Location: Tampa Posts: 252 Drives: '13 SPT Magma 6M Rep Power: 13	Yup, Big Bend and 301 area __________________ FAST INTENTIONS CF CBE & TEST PIPES \| CARBON SIGNAL N-TYPE SPOILER \| FORGESTAR \|INJEN INTAKE \| EVO-R DIFFUSER \| TOMMY KAIRA \| MORE TO COME

03-09-2015, 11:31 AM	#14 (permalink)
Limeybastard A True Z Fanatic Join Date: Apr 2014 Location: FL and London UK. Posts: 1,514 Drives: 2014 370Z Sport. Rep Power: 17	Lovely journal, fully enjoyed reading and viewing the pics.

03-09-2015, 01:24 PM	#15 (permalink)
Unique_Z A True Z Fanatic Join Date: Dec 2010 Location: Brunei Posts: 1,515 Drives: 370Z, 180SX Rep Power: 18	Hi Thomas told me you're having trouble with your offset. Anyway, the last pic you posted is my Z. The fronts is actually +18 and i fitted a 20mm spacer to make it -2. I got the cambers set at -3.8ish to get it look tucked. Hope that helps Karl (owner of K3projekt) doesn't really know much bout 370Z's offset. I calculated them by my own before ordering it. __________________ My Z Build UniqueZ Last edited by Unique_Z; 03-09-2015 at 01:28 PM. Reason: Missed a few words

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
O&G's Journal	O&G	Member's 370Z Gallery	648	02-16-2017 03:30 PM
PG6Speeds Journal	pg6speed	Member's 370Z Gallery	19	12-21-2011 10:21 PM
Cmike2780's Journal	Cmike2780	Member's 370Z Gallery	9	06-29-2011 11:17 PM
tag journal with car color	bflosabre91	The370Z.com Feedback, Suggestions & Questions	1	05-12-2011 12:46 PM
Z BEST Journal	Z BEST	Member's 370Z Gallery	26	01-09-2011 03:19 PM