Mike's Journal

Mike · 06-11-2009, 08:44 PM

Quote:

Originally Posted by ChrisSlicks

The stock wheels look the same. There is a flat top and a flat bottom in the hole, yet the lug nuts still have taper at the end and a flat washer in the middle.

thanks!, thinking about it all, the lug shouldn't need to bottom out, as the washer against the wheel is what is holding it in place. Guess I didn't need the new lugs after all. Oh well.

Mike · 06-11-2009, 08:45 PM

Quote:

Originally Posted by CBRich

Very nice look. I'd also like to know about your business. Cost for wheels, etc.

Thanks, but I'm not a forum sponsor, so I don't think its appropriate to discuss that openly. You can shoot me a pm if you want though, hopefully that won't break any rules or courtesies.

LiquidZ · 06-12-2009, 08:36 PM

What is the actual size of the wheels and their offset?

I see 19x9 and 19x10 in one place, and then 19x9.5 and 19x10.5 in another.

Mike · 06-12-2009, 09:18 PM

19x9J +47
19x10J +30

Same width and offset as stock 19s.

is what is stamped on them. I don't know the significance of the J, but I'm guessing it doesn't mean 1/2.

gorillanismo · 06-14-2009, 03:10 PM

that wheels look awesome man!!!!
wow, I never thought that the final product will be so great!!!

Mike · 06-14-2009, 06:43 PM

Quote:

Originally Posted by gorillanismo

that wheels look awesome man!!!!
wow, I never thought that the final product will be so great!!!

Thanks!

WShade · 06-17-2009, 09:40 PM

Looks very good! I love the color combination and the quality is impeccable.

DJcuetip · 06-17-2009, 11:01 PM

awesome job...! wish i knew how to do all that stuff...

side note: has anyone figured out if the door handles are powder coatable? or are they plastic?

Mike · 06-17-2009, 11:25 PM

even if they are plastic, they 'may' be powdercoatable. If they don't melt at 375, they can be coated. Anyone want to be a guineau pig donor

travisjb · 06-18-2009, 12:16 AM

subscribed! looking forward to your build! nice job on the wheels!

DJcuetip · 06-18-2009, 12:47 AM

hahah if only you were close by.. i have a lot of ideas for powdercoat accents on the Z!

Caravanshaka · 06-18-2009, 09:53 PM

<--anxiously awaiting pics of the black Z riding on those sexy nismo wheels!!

Mike · 06-18-2009, 10:56 PM

Day 1
Got the calipers powdercoated, tires switched over and rear springs and sways installed.

Tomorrow: Clear bra, and the goal is to do the front half of the suspension, plus powdercoat the outsides of the ichiba spacers black (assuming they need it, I haven't opened that box yet). Since the rear took an hour and I've done several 350Z spring swaps in short order, it shouldn't take much more, but I do have 2 other sets of sport brakes to powdercoat and a Z06 set. I hate it when work gets in the way!

Teaser to see what it will look like!

Caravanshaka · 06-18-2009, 11:03 PM

Lookin GOOD!!

although I have to admit the silver valve stem looks outta place

2theextreme · 06-18-2009, 11:14 PM

I like that! Makes me want to do something similar with my blue Z.....blue rims.....

06-12-2009, 08:36 PM	#18 (permalink)
LiquidZ A True Z Fanatic Join Date: Nov 2008 Location: Columbus, OH Posts: 1,940 Drives: Mag. Black 2009 370Z Rep Power: 705	What is the actual size of the wheels and their offset? I see 19x9 and 19x10 in one place, and then 19x9.5 and 19x10.5 in another. __________________

06-12-2009, 09:18 PM	#19 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	19x9J +47 19x10J +30 Same width and offset as stock 19s. is what is stamped on them. I don't know the significance of the J, but I'm guessing it doesn't mean 1/2. Last edited by Mike; 06-14-2009 at 06:43 PM.

06-14-2009, 03:10 PM	#20 (permalink)
gorillanismo Base Member Join Date: Jun 2009 Location: Puerto Rico Posts: 112 Drives: 03Chevrolet Cavalier Rep Power: 16	that wheels look awesome man!!!! wow, I never thought that the final product will be so great!!! __________________ SHIFT: The Future NISSAN

06-17-2009, 09:40 PM	#22 (permalink)
WShade Track Member Join Date: Jan 2009 Location: San Antonio, TX Posts: 765 Drives: 09 370Z T/S/N Rep Power: 187	Looks very good! I love the color combination and the quality is impeccable. __________________ Q50S Q60 RS400

06-17-2009, 11:25 PM	#24 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	even if they are plastic, they 'may' be powdercoatable. If they don't melt at 375, they can be coated. Anyone want to be a guineau pig donor __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

06-17-2009, 11:01 PM	#23 (permalink)
DJcuetip Track Member Join Date: Dec 2008 Location: CA Posts: 704 Drives: 370 Rep Power: 259	awesome job...! wish i knew how to do all that stuff... side note: has anyone figured out if the door handles are powder coatable? or are they plastic?

06-18-2009, 12:16 AM	#25 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	subscribed! looking forward to your build! nice job on the wheels! __________________ 2009 370Z #104 For Sale

06-18-2009, 12:47 AM	#26 (permalink)
DJcuetip Track Member Join Date: Dec 2008 Location: CA Posts: 704 Drives: 370 Rep Power: 259	hahah if only you were close by.. i have a lot of ideas for powdercoat accents on the Z!

06-18-2009, 09:53 PM	#27 (permalink)
Caravanshaka I shake Caravans Join Date: Apr 2009 Location: north Dallas Posts: 9,517 Drives: everyone crazy Rep Power: 42	<--anxiously awaiting pics of the black Z riding on those sexy nismo wheels!!

06-18-2009, 10:56 PM	#28 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	Day 1 Got the calipers powdercoated, tires switched over and rear springs and sways installed. Tomorrow: Clear bra, and the goal is to do the front half of the suspension, plus powdercoat the outsides of the ichiba spacers black (assuming they need it, I haven't opened that box yet). Since the rear took an hour and I've done several 350Z spring swaps in short order, it shouldn't take much more, but I do have 2 other sets of sport brakes to powdercoat and a Z06 set. I hate it when work gets in the way! Teaser to see what it will look like! __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

06-18-2009, 11:03 PM	#29 (permalink)
Caravanshaka I shake Caravans Join Date: Apr 2009 Location: north Dallas Posts: 9,517 Drives: everyone crazy Rep Power: 42	Lookin GOOD!! although I have to admit the silver valve stem looks outta place

06-18-2009, 11:14 PM	#30 (permalink)
2theextreme RIP Tony :( (1969-2015) Join Date: Feb 2009 Location: Northern Virginia Posts: 18,802 Drives: '14 Mustang GT/CS Rep Power: 67	I like that! Makes me want to do something similar with my blue Z.....blue rims..... __________________ SpinTech Mufflers, Airaid CAI, JBA H-Pipe, Lethal Performance Over Axle Pipes, MMD Quarter Panel Louvers, Cervini's Ram Air Type IV Hood, Carbon Fiber Radiator Cover, GT500 Rear Valance, Quad Exhaust Tips

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
wstar's Journal	wstar	Member's 370Z Gallery	865	12-28-2019 10:15 AM
TravisJB Journal	travisjb	Member's 370Z Gallery	1977	11-03-2017 10:39 AM
RCZ's 370Z Journal.	RCZ	Member's 370Z Gallery	1743	08-10-2013 12:55 AM
KillerBee370's journal	KillerBee370	Engine & Drivetrain	100	08-18-2010 02:58 PM
LiquidZ's Journal	LiquidZ	Member's 370Z Gallery	22	05-23-2009 12:42 AM