Mike's Journal

Mike · 07-12-2013, 09:17 PM

So, three months later, I've finally got my new wing, Aeromotions, static version, and am ready for VIR next weekend with NASA and Forged.

I purchased the wing from our other resident pro driver bkleeman (Brian Kleeman, DWW Motorsports , Pirelli World Challenge series)

Not only did the old wing crack, but where the smallish mounts attached to the decklid, the force pushing down on the hatch actually cracked the aluminum skin.

Since we had to repair that, and I didn't want it happening again, my body shop, Autoglo, in Tucker GA, (great shop, way better than any other I have EVER dealt with!!!!!!), made some custom formed, I think 1/8 or 3/32" plates to spread the force out over a larger area, then panel bonded, bolted and blended them into the hatch, and mounted the new wing to that.

Rusty · 07-12-2013, 09:37 PM

Nice mike.

How much down force you think the old wing was pushing? Wondering because of the cracks, or was it from just when the old wing failed?

Baer383 · 07-12-2013, 09:41 PM

Looks real good Mike!!!!

Mike · 07-12-2013, 09:55 PM

Quote:

Originally Posted by Rusty

Nice mike.

How much down force you think the old wing was pushing? Wondering because of the cracks, or was it from just when the old wing failed?

I really have no idea. When I had the car at the bodyshop for cage painting, the owner saw the paint was cracking around the wing base and wasn't happy about it, but we think it was just paint at that point.

I was doing 155 on the high banks of Daytona, which added a lot more G force, so it probably added to it. When I took the old wing off, the cracks were about an inch and a half long at the back end of the mounting bases.

I had that wing at its lowest possible angle too!

FL 4Motion · 07-13-2013, 01:52 AM

Quote:

Originally Posted by Mike

I really have no idea. When I had the car at the bodyshop for cage painting, the owner saw the paint was cracking around the wing base and wasn't happy about it, but we think it was just paint at that point.

I was doing 155 on the high banks of Daytona, which added a lot more G force, so it probably added to it. When I took the old wing off, the cracks were about an inch and a half long at the back end of the mounting bases.

I had that wing at its lowest possible angle too!

/\ that's moving!

HKYStormFront · 07-13-2013, 01:42 PM

you'll love it! brian said it made a huuuuge difference instantly out on track!

SPOHN · 07-13-2013, 01:45 PM

Sweetness. Mike I got your splitter ready. Might have to wait till next Friday or weekend before I drive over.

travisjb · 07-13-2013, 10:18 PM

sweet! that's the right wing for this car, you're going to be happy

I usually set mine up for 8-9 degrees as measured along the top two high points... you look about 13+ degrees from the pic, which is way too much for this wing... You might be able to get a chart from aeromotions but my understanding is the sweet spot between drag and download is 8-9 (not much more down after that but a lot more drag)

Consider getting a thin aluminum angle strip that you can use as a gurney flap, and once you apply it with a strong adhesive, then run some electrical tape along the sides

A number of racers I trust told me to reverse the side plates... I think aeromotions did it the way they did to have a cool look, but *I think* they a bit more efficient reversed... could be wrong, but this side plates are backwards from most other designs... when you reverse them, the holes should line up fine

Mike · 07-13-2013, 10:30 PM

Quote:

Originally Posted by SPOHN

Sweetness. Mike I got your splitter ready. Might have to wait till next Friday or weekend before I drive over.

ok, we can do it anytime after I get back. Next month schedule might come out tomorrow or the next day.

Mike · 07-13-2013, 10:32 PM

Quote:

Originally Posted by travisjb

sweet! that's the right wing for this car, you're going to be happy

I usually set mine up for 8-9 degrees as measured along the top two high points... you look about 13+ degrees from the pic, which is way too much for this wing... You might be able to get a chart from aeromotions but my understanding is the sweet spot between drag and download is 8-9 (not much more down after that but a lot more drag)

Consider getting a thin aluminum angle strip that you can use as a gurney flap, and once you apply it with a strong adhesive, then run some electrical tape along the sides

A number of racers I trust told me to reverse the side plates... I think aeromotions did it the way they did to have a cool look, but *I think* they a bit more efficient reversed... could be wrong, but this side plates are backwards from most other designs... when you reverse them, the holes should line up fine

Yeah, I don't have an angle gauge and just eyeballed it. Brian said his is a bit lower, but they are planning to raise it to about where mine is. I think I'm going to start a little lower and see how it works out, and adjust from there. With the turnbuckles, it will be fairly easy.

Mike · 07-13-2013, 10:33 PM

although, I ran the APR at lowest AOA and Z1's driver increased the angle on their car (they bought the replacement from me). who knows? I guess its all personal preference and feel.

Mike · 07-15-2013, 07:06 AM

I bought an angle measurer yesterday at Harbor freight. Its at 6 degrees.

SPOHN · 07-15-2013, 08:45 AM

I have a app for it. Works dead on when I tested against other tools.

Mike · 07-19-2013, 09:23 PM

At NASA Mid Atlantic, VIR.
All loaded up yesterday:

When checking the wheel torque after a session, I found a snapped stud. Had to drive one more session in the instructor school to complete it, so I had them tech the tow vehicle and took it out for a half session. It behaved well in the high speed stuff, even hitting 90 in the esses, but didn't like the slower speed corners.

Got a new wheel stud from the local Nissan dealer and fixed the car, so I'm all good for the weekend, and I'm now a NASA instructor.

GaleForce · 07-19-2013, 09:27 PM

Congrats!

07-12-2013, 09:17 PM	#466 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	So, three months later, I've finally got my new wing, Aeromotions, static version, and am ready for VIR next weekend with NASA and Forged. I purchased the wing from our other resident pro driver bkleeman (Brian Kleeman, DWW Motorsports , Pirelli World Challenge series) Not only did the old wing crack, but where the smallish mounts attached to the decklid, the force pushing down on the hatch actually cracked the aluminum skin. Since we had to repair that, and I didn't want it happening again, my body shop, Autoglo, in Tucker GA, (great shop, way better than any other I have EVER dealt with!!!!!!), made some custom formed, I think 1/8 or 3/32" plates to spread the force out over a larger area, then panel bonded, bolted and blended them into the hatch, and mounted the new wing to that. travisjb, FL 4Motion, Mr&Mrs and 3 others like this. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

07-12-2013, 09:37 PM	#467 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,291 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Nice mike. How much down force you think the old wing was pushing? Wondering because of the cracks, or was it from just when the old wing failed? __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

07-12-2013, 09:41 PM	#468 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 30	Looks real good Mike!!!! __________________ 2013 ZL1 754 rwhp 747 rwtq

07-13-2013, 01:42 PM	#471 (permalink)
HKYStormFront A True Z Fanatic Join Date: Apr 2009 Location: Greer, SC Posts: 14,954 Drives: 06 Frontier SE 6spd Rep Power: 52	you'll love it! brian said it made a huuuuge difference instantly out on track! __________________ Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

07-13-2013, 01:45 PM	#472 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 222	Sweetness. Mike I got your splitter ready. Might have to wait till next Friday or weekend before I drive over. __________________

07-13-2013, 10:18 PM	#473 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 189	sweet! that's the right wing for this car, you're going to be happy I usually set mine up for 8-9 degrees as measured along the top two high points... you look about 13+ degrees from the pic, which is way too much for this wing... You might be able to get a chart from aeromotions but my understanding is the sweet spot between drag and download is 8-9 (not much more down after that but a lot more drag) Consider getting a thin aluminum angle strip that you can use as a gurney flap, and once you apply it with a strong adhesive, then run some electrical tape along the sides A number of racers I trust told me to reverse the side plates... I think aeromotions did it the way they did to have a cool look, but I think they a bit more efficient reversed... could be wrong, but this side plates are backwards from most other designs... when you reverse them, the holes should line up fine __________________ 2009 370Z #104 For Sale

07-13-2013, 10:33 PM	#476 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	although, I ran the APR at lowest AOA and Z1's driver increased the angle on their car (they bought the replacement from me). who knows? I guess its all personal preference and feel. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

07-15-2013, 07:06 AM	#477 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	I bought an angle measurer yesterday at Harbor freight. Its at 6 degrees. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

07-15-2013, 08:45 AM	#478 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 222	I have a app for it. Works dead on when I tested against other tools. __________________

07-19-2013, 09:23 PM	#479 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	At NASA Mid Atlantic, VIR. All loaded up yesterday: When checking the wheel torque after a session, I found a snapped stud. Had to drive one more session in the instructor school to complete it, so I had them tech the tow vehicle and took it out for a half session. It behaved well in the high speed stuff, even hitting 90 in the esses, but didn't like the slower speed corners. Got a new wheel stud from the local Nissan dealer and fixed the car, so I'm all good for the weekend, and I'm now a NASA instructor. OMGWTFBBQ, JB1, sig11 and 4 others like this. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

07-19-2013, 09:27 PM	#480 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Congrats! __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
wstar's Journal	wstar	Member's 370Z Gallery	865	12-28-2019 10:15 AM
TravisJB Journal	travisjb	Member's 370Z Gallery	1977	11-03-2017 10:39 AM
RCZ's 370Z Journal.	RCZ	Member's 370Z Gallery	1743	08-10-2013 12:55 AM
KillerBee370's journal	KillerBee370	Engine & Drivetrain	100	08-18-2010 02:58 PM
LiquidZ's Journal	LiquidZ	Member's 370Z Gallery	22	05-23-2009 12:42 AM